Kohler 9178-0 Dimensions Guide

Features

•

Safeguard

slip-resistant surface on bath floor.

•

Single threshold for alcove installation with three tile-in flanges.

•

KOHLER

enameled cast iron.

•

Recessed drain (can be used with K-9157 or K-9159 drain

cover).

•

Right center drain.

•

Ideal size for remodel installations into a 5-foot alcove with a

shower door.

•

Rim size optimized for water containment and aesthetics.

Required Products/Accessories

K-9157 Drain Cover

K-9159 Drain Cover

Codes/Standards

ASME A112.19.1/CSA B45.2

Recommended Products/Accessories

K-9132 Shower Drain

ASTM F462

K-23726 Drain treatment

KOHLER

Enameled Cast Iron Bath

and Shower Base Lifetime Limited

Warranty

K-23725 Cast iron cleaner

See website for detailed warranty information.

Available Colors/Finishes

Color tiles intended for reference only.

DescriptionCodeColor

White0

Biscuit96

Almond47

DuneNY

Ice™ Grey95

SandbarG9

1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

6-14-2020 11:58 - US/CA

Bellwether

60" x 34" Single-threshold shower base

K-9178

(13 mm)

1/2"

4-1/2"

(114 mm)

34"

(864 mm)

16-1/2"

(419 mm)

3-3/4"

(95 mm)

6-1/2" (165 mm)

60" (1524 mm)

30°

Notes

Technical Information

Measure your actual product for rough-in details.

All product dimensions are nominal.

Install this product according to the installation

instructions.

Three-wall alcoveInstallation:

RightDrain location:

The dimensions are applicable for this product

only and should not be used to fabricate

substitute bases for shower enclosures.

193 lbs (87.5 kg)Weight:

KOHLER steam generator/control kit is designed

for use with this product. Kohler Co. shall not be

responsible for problems encountered due to the

installation and use of other manufacturer’s steam

generators.