Kohler 837-0 Dimensions Guide

Type
Dimensions Guide

Kohler 837-0 is a 5-foot bath with an integral flange, left drain, lumbar support, and apron. It is made of cast iron with a Safeguard finish and is suitable for alcove installation. The bath is ADA compliant when installed to the specific requirements of these regulations. The minimum floor load for the bath is 52 lbs/ft². The hot water supply should be 70% of the capacity of the bath or greater. The bath has a water depth of 9" and a water capacity of 32.6 gallons. The minimum flat for the door is 2-5/8".

Kohler 837-0 is a 5-foot bath with an integral flange, left drain, lumbar support, and apron. It is made of cast iron with a Safeguard finish and is suitable for alcove installation. The bath is ADA compliant when installed to the specific requirements of these regulations. The minimum floor load for the bath is 52 lbs/ft². The hot water supply should be 70% of the capacity of the bath or greater. The bath has a water depth of 9" and a water capacity of 32.6 gallons. The minimum flat for the door is 2-5/8".

Features
Integral flange.
Left drain.
Integral lumbar support.
Integral apron.
60" (1524 mm) x 30-1/4" (768 mm) x 14-1/2" (368 mm)
Material
Cast iron with Safeguard
®
finish.
Installation
Alcove
Recommended Accessories
K-37380 30" Rough-in Cable Bath Drain
K-37383 30" Rough-in Cable Bath Drain
K-7213 27" Cable Bath Drain
Codes/Standards
K-7214 27" Cable Bath Drain
ASME A112.19.1/CSA B45.2
K-37386 30" Rough-in Cable Bath Drain
ASTM F462
K-702200-G54 Frameless Sliding Bath Door
ADA
K-702200-G73 Frameless Sliding Bath Door
ICC/ANSI A117.1
K-702200-L Frameless Sliding Bath Door
K-702205-L Frameless Sliding Bath Door
KOHLER
®
Enameled Cast Iron Bath
and Shower Base Lifetime Limited
Warranty
K-706000-D3 Frameless Sliding Bath Door
K-706000-L Frameless Sliding Bath Door
K-706003-L Frameless Sliding Bath Door
K-706004-D3 Frameless Sliding Bath Door
See website for detailed warranty information.
K-706004-L Frameless Sliding Bath Door
K-706007-L Frameless Sliding Bath Door
Available Color/Finishes
K-7160-TF Bath Drain
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
Almond47
DuneNY
SandbarG9
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-18-2018 13:47
Bellwether
®
5' Bath
K-837
1/2"
Notes
Technical Information
Measure your actual product for rough-in details.
All product dimensions are nominal.
Install this product according to the installation
instructions.
3-Wall AlcoveInstallation:
LeftDrain location:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
48-3/4" x 19-5/16" (1238 mm x 491 mm)Basin area, bottom:
54-11/16" x 21-3/16" (1389 mm x 538 mm)Basin area, top:
310 lbs (140.6 kg)Weight:
ADA compliant when installed to the specific
requirements of these regulations.
52 lbs/ft² (253.9 kg/m²)Minimum floor load:
9" (229 mm)Water depth:
32.6 gal (123.4 L)Water capacity:
2-5/8" (66 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-18-2018 13:47
Bellwether
®
5' Bath
K-837
  • Page 1 1
  • Page 2 2

Kohler 837-0 Dimensions Guide

Type
Dimensions Guide

Kohler 837-0 is a 5-foot bath with an integral flange, left drain, lumbar support, and apron. It is made of cast iron with a Safeguard finish and is suitable for alcove installation. The bath is ADA compliant when installed to the specific requirements of these regulations. The minimum floor load for the bath is 52 lbs/ft². The hot water supply should be 70% of the capacity of the bath or greater. The bath has a water depth of 9" and a water capacity of 32.6 gallons. The minimum flat for the door is 2-5/8".

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI