Page is loading ...
FEATURES
• 66-15/16" x 29-1/2" x 21-1/8"
• Enameled cast iron construction
• Slip-resistant surface
• Acrylic skirt
FBF794S#01D
Cast Iron Nexus Bathtub
CODES/STANDARDS
PRODUCT SPECIFICATION
• Meets or exceeds ASME A112.19.1/CSA B45.2
• Certifications: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
The cast-iron bath shall be 66-15/16" in length, 29-
1/2" in width and 21-1/8" in height. Bath shall be free
standing with center drain. Bath shall have a
slip-resistant surface and acrylic skirt. Bath shall be
TOTO Model FBF794S____.
COLORS/FINISHES
• Standard Shell Color
#01 Cotton
• Standard Drain Finish
CP Polished Chrome
BN Brushed Nickel
• Optional
See price book for additional colors
#SS-00472, v.08
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
FBF794S#01D
Cast Iron Nexus Bathtub
SPECIFICATIONS
• Size 66-15/16"L x 29-1/2"W x
21-1/8"
• Depth 16-15/16"
• Water Depth 12-7/8" (327mm)
• Warranty Lifetime limited warranty
• Material Enameled cast iron
Acryllic skirt
• Shipping Weight 390 lbs.
• Shipping Dimensions 70-1/2"L x 33-1/16"W x
26-9/16"H
• Gallons 48 to overflow
These dimensions and specifications are subject to change without notice
66-15/16” (1700mm)
2-15/16” (75mm)
16-15/16”
(430mm)
13/16”
(20mm)
20-9/16”
(522mm)
15-3/4”
(400mm)
ø1-1/2”(38mm)
Dia. Brass Tubing
21-1/8”
(537mm)
16-3/4”
(425mm)
1-11/16”
(44mm)
33-7/16”
(850mm)
Section A-A
Section B-B
AA
B
B
29-1/2”
(750mm)
INSTALLATION NOTES
For installation without access to the floor below
a suitable drain connection (not supplied) will be
required. Please contact TOTO Tech Support for
further assistance. Please check local codes. The feet
on FBF794S#01D are adjustable to +/- 5/16” (8 mm).
The supplied straight drain bend can be replaced with
a tee to allow near horizontal drainage. Brass tee sold
separately.
Floor support under bath must provide a minimum of
80 lbs/square foot (391 kg/square meter) loading.
Check local codes for requirements on installing an
ASSE 1070/ASME A112. 1070/CSA B125.70 compliant
device in series with the tub faucet.
/
