Yuntai IPC-T5 User manual

Brand: Yuntai

Model: IPC-T5

Category: Video servers/encoders

Type: User manual

Yuntai IPC-T5

Yuntai IPC-T5 is a professional IP camera tester designed for the installation and maintenance of security monitoring equipment, such as network HD cameras and analog cameras. It features several advanced capabilities that offer convenience and efficiency for users. Lets you connect to different types of cameras, including IP network cameras, coaxial HD cameras, and analog cameras, making it a versatile tool for various surveillance systems. The device supports the latest H.265/H.264 video compression formats, allowing you to view and analyze high-resolution video streams.

Yuntai IPC-T5

IP camera tester

User Manual

（IPC-T5）

 Thank you for purchasing the IP camera tester. Please read the manual before using the

IP camera tester and use properly.

 For using the IP camera tester safely, please first read the [Safety Information] carefully

in the manual.

 The manual should be kept well in case of reference.

 Keep the S/N label for after-sale service within warranty period. Product without S/N

label will be charged for repair service.

 If there is any question or problem while using the IP camera tester, or damages

occurred on the product, please contact our technical Department.

Content

Content .............................................................................................................................. 3

1. Safety Information .............................................................................................. 5

2. IP Camera Tester Introduction ........................................................................... 6

2.1 General ........................................................................................................ 6

2.2 Product Features ......................................................................................... 6

2.3 Function Introduction .................................................................................. 7

2.3.1 H.265 Mainstream test ............................................................................. 7

2.3.2 HD display and touch operation ............................................................... 7

2.3.3 IP camera test ........................................................................................... 7

2.3.4 Android system ......................................................................................... 8

2.3.5 App Store .................................................................................................. 8

2.3.6 Audio test ................................................................................................. 8

2.3.7 HDMI output display................................................................................. 8

2.3.8 Standard USB port .................................................................................... 8

2.3.9 IP address scan ......................................................................................... 8

2.3.10 PING test ................................................................................................. 8

2.3.11 IP discovery ............................................................................................. 8

2.3.12 Video screenshot .................................................................................... 8

2.3.13 Video record ........................................................................................... 9

2.3.14 Playback .................................................................................................. 9

2.3.15 DC12V 1A power output ......................................................................... 9

2.3.16 Standard RS485 port ............................................................................... 9

2.3.17 CVI camera test (* optional) ................................................................... 9

2.3.18 TVI camera test (* optional) ................................................................... 9

2.3.19 AHD camera test (* optional) ................................................................. 9

2.3.20 Analog camera video test ..................................................................... 10

2.3.21 PTZ control ............................................................................................ 10

2.4 Packing list ................................................................................................. 10

2.5 Function interface ..................................................................................... 11

3. Operation .......................................................................................................... 13

3.1 Battery installation and charging instructions .......................................... 13

3.2 Instrument connection .............................................................................. 13

3.2.1 IP camera connection ............................................................................. 13

3.2.2 Analog camera / coaxial HD camera connection * ................................. 14

3.3 Function menu operation .......................................................................... 14

3.3.1 UI ............................................................................................................ 14

3.3.2 IPC Test app ............................................................................................ 15

3.3.3 Network Tool .......................................................................................... 21

3.3.4 Flashlight ................................................................................................. 23

3.3.5 Calculator ................................................................................................ 24

3.3.6 Recorder function ................................................................................... 24

3.3.7 Browser ................................................................................................... 25

3.3.8 Clock ....................................................................................................... 26

3.3.9 Document management ......................................................................... 28

3.3.10 System setting ...................................................................................... 29

3.4 DC12V 1A Power output ............................................................................ 30

3.5 Audio test .................................................................................................. 31

4. Specifications .................................................................................................... 32

1. Safety Information

 The tester is intended to use in compliance with the local rules of the electrical usage

and avoid to apply at the places which are inapplicable for the use of electrics such as

hospital, gas station etc.

 When using this device, please use the original accessories to avoid damage caused by

the use of uncertified accessories.

 The accessories attached to this device are only suitable for this device. Do not use

them for other purposes to avoid unforeseen accidents.

 To prevent the functional decline or failure, the product should not be sprinkled or

damped.

 The exposed part of the tester should not be touched by the dust and liquid.

 During transportation and use, it is highly recommended to avoid the violent collision

and vibration of the tester, lest damaging components and causing failure.

 Don’t leave the device alone while charging. If the battery is found severely hot, the

device should be powered off from the electric source at once. The tester should not

be charged over 10 hours.

 Don’t use the tester where the humidity is high. Once the tester is damp, power off

immediately and move away other connected cables.

 The tester should not be used in the environment with the flammable gas.

 Do not disassemble the instrument. If the disassembly is necessary indeed, please

contact with the technician of our company.

 The instrument should not be used under the environment with strong

electromagnetic interference.

 Don’t touch the tester with wet hands or waterish things.

 Don’t use the detergent to clean and the dry cloth is suggested to use. If the dirt is not

easy to remove, the soft cloth with water or neutral detergent can be used. But the

cloth should be tweaked sufficiently.

2. IP Camera Tester Introduction

2.1 General

The IP Camera tester is used for the installation and maintenance of security monitoring

equipment such as IP network HD cameras and analog video surveillance cameras. The

device uses a 5-inch high-definition touch screen display, and the main stream can display

H.265/H.264 encoded network HD camera images, the highest resolution 4K. Display coaxial

HD camera and CVBS camera image (optional function) and cloud control. The combination

of touch screen and key buttons make the IP camera tester very user-friendly.

The device has built-in PING, IP address search and other Ethernet test functions; LED

Flashlight, DC12V power output and other functions, small and light, is conducive to improve

the efficiency of installation and maintenance personnel.

2.2 Product Features

 5-inch 800x480 HD capacitive touch screen for clearer image display and easy-to-use

touch operation.

 New hardware decoding, support H.265 decoding. The camera has the highest

resolution 4K in the H.265/H.264 encoding mode.

 Support ONVIF network camera test

 Support H.265/H.264 network camera testing such as Dahua, HIK and ACTi

 CVI coaxial HD camera image display, video, capture and playback *

 TVI coaxial HD camera image display, video, capture and playback *

 AHD coaxial HD camera image display, video, capture and playback *

 Analog video image display, NTSC, PAL auto-adaptation and standard display

 Support PELCO-P, PELCO-P and other PTZ control protocols

 Image capture, video and playback of network camera and analog camera

 Replaceable TF card

 LCD screen brightness / contrast, color saturation adjustable

 PING test to test whether the Ethernet port of an IP camera or other network device is

working properly and the IP address is correct.

 IP address scanning to quickly find the IP address of an IP camera or other network

device linked to the device

 Support RS485 interface, the rate is adjustable from 150~115200bps

 PTZ (PTZ and zoom) control, which can control the direction of pan/tilt rotation,

camera zoom, focus

 DC12V 1A power output, providing emergency power to the camera

 Audio input test, test audio signals such as pickups

 Two 18650 rechargeable batteries, 5-6 hours on a single charge, can be used normally

for about 6 hours

2.3 Function Introduction

2.3.1 H.265 Mainstream test

New hardware decoding, H.265/H264 encoding camera supports the main stream playback

image, the highest resolution under the main stream supports 4K. Real-time picture is clear

and smooth.

2.3.2 HD display and touch operation

5-inch 800*480 HD resolution, LCD capacitive touch screen, the image display is clearer;

capacitive touch screen operation makes the operator simpler, easier to use, more flexible

and more efficient.

2.3.3 IP camera test

IPC camera tester, built-in ONVIF test tool, IP network camera test, browser and other

functions, can display the image of the network camera, change the IP address etc. The 5-

inch 800×480 display has a larger viewing angle, making it easy for the installation engineer

to locate the network camera. Cross-network test, support video, capture. The physical

button controls the network camera PTZ (ONVIF protocol). Built-in WIIF module to test WIFI

cameras.

2.3.4 Android system

This product has an Android system and supports the installation of third-party apps with

Android version.

2.3.5 App Store

The built-in app store allows you to upgrade your own system apps at will.

2.3.6 Audio test

The audio test function of the video monitoring tester can test audio devices such as pickups

in the video monitor front end.

2.3.7 HDMI output display

Product expansion performance can be external HDMI output display according to user

needs, for large screen display.

2.3.8 Standard USB port

The product can be connected to USB, support 5V1A output, and can be used with other

devices such as mouse, keyboard, etc.

2.3.9 IP address scan

In the digital monitoring application, if the IP address of the IP camera is unclear or forgotten,

the device cannot be debugged. The device's IP address scan can quickly find the IP address

of the IP camera or other network device that connected to the device.

2.3.10 PING test

PING is the most common tool in network debugging. It is used to test whether the Ethernet

port of an IP camera or other network device works normally and the IP address is correct.

2.3.11 IP discovery

The device auto-scan the whole network segment IP, as well as auto-modify the tester’s IP

to the same network segment with the scanned camera’s IP. The device can set static IP

address of multiple network segments, and can test IP cameras of different network

segments at the same time.

2.3.12 Video screenshot

While video test and PTZ debug with the tester, it does not need to switch screens. The

video images can be taken and taken at any time and stored in the SD card of the device to

facilitate the construction and recording of the scene.

2.3.13 Video record

While video test and PTZ debug with the tester, the video can be recorded by one-click

operation and stored in the SD of the device to facilitate the construction and recording of

the scene.

2.3.14 Playback

The device stores the video files and captured image files in the SD card, saves these files

under different directories according to different dates. Users can easily find and view files

from different periods.

2.3.15 DC12V 1A power output

The video monitoring tester is designed to supply power to the camera with a 12V 1A power

output port to provide temporary power to the camera. Mainly used for live demonstration

and testing of some cameras.

2.3.16 Standard RS485 port

The product supports multiple interfaces and also includes RS485 port, which is convenient

for testing camera devices of different interfaces and supports traditional PTZ control.

2.3.17 CVI camera test (* optional)

CVI coaxial HD video monitoring test, support 720p 25/30/50/60fps, 1080p 25/30fps,

2560x1440P 25/30 FPS etc. resolution digital camera image test. The device can zoom in,

record, take photos, view pictures and video playback etc.

2.3.18 TVI camera test (* optional)

TVI coaxial HD video monitoring test, support 720p 25/30/50/60fps, 1080p 25/30fps,

2048x1536/18/25/30 fps, 2688 x 1520P 15FPS, 2560x1944/12.5/20 fps, 2592 x 1944P

12.5/20FPS, 3840 x 2160 15 FPS etc. resolution digital camera image test. The device can

zoom in, record, take photos, view pictures and video playback etc.

2.3.19 AHD camera test (* optional)

AHD coaxial HD video surveillance test, support 720p 25/30fps, 1080p 25/30fps,

2048x1536P 18/25/30fps, 2560 x 1440P 15/25/30 FPS, 2592 x 1944P 12.5/20FPS etc.

resolution digital camera image test. The device can zoom in, record, take photos, view

pictures and video playback etc.

2.3.20 Analog camera video test

The device can display the image of an analog camera, a 4-inch 800x480 display, a larger

viewing angle, and more intuitive display of camera image quality. Supports image signals in

PAL/NTSC format. The backlight brightness of the LCD display of the device is adjustable, and

the brightness, contrast, and color saturation of the analog video image can be adjusted.

2.3.21 PTZ control

The video monitoring tester has built-in PTZ control protocols such as Pelco-D/P. Through its

own RS485 interface, the user can control the rotation direction of the PTZ camera, move

left, move right, go up, go down etc. and can adjust zoom, focus and aperture size etc.

2.4 Packing list

1). Tester

2). Adaptor DC5V 2A

3). RS485 cable

4). Output Power cable

5). Tool bag

2.5 Function interface

1 Power on/wake up indicator

2 Charging indicator, flashing while charging, always on when fully charged.

Bottom interface

Top inteface

3 Micro SD card moveable, (supports up to 32GB)

4 HDMI output interface

5 Audio output and earphone interface

6 RS485 Interface: RS485 communication for the PTZ

7 LED lamp

8 5V USB interface, external mouse and keyboard, etc.

9 Audio input

10 Ethernet interface

11 DC12V1A power output, for provisional DC power supply

12 RESET - unexpected failure driver reset port

13 5V charging interface

3. Operation

3.1 Battery installation and charging instructions

This device has a built-in rechargeable polymer lithium battery. To ensure safe

transportation, the battery connection in the battery compartment must be disconnected

during transportation! (Factory added battery separator)

Unplug the battery separator before use.

No need to disconnect the battery when the user is in normal use.

Pressing the key continuously can power on or off the tester.

Notice: Please use the original adaptor and connected cable of the device!

When the battery icon is full or the charge indicator is always on, indicate the battery

charging is completed.

Notice: When the battery icon is full, the battery is approximately 90% charged. The

charging time can be extended for about 1 hour. Do not charge more than 12 hours on a

single charge. It can be turned on while charging, but the charging time is extended.

Notice: When the system is abnormal, please disconnect all external cables,

continuously press the key until the instrument automatically turns off, then restart

the device.

3.2 Instrument connection

3.2.1 IP camera connection

Connect an IP camera to the LAN port of the device, connect the IP camera to the power

supply, the LINK of the LAN port of the device constantly bright, and the data indicator

flashes, indicating that the device and the IP camera are properly connected and

communicating, and the device can test the image of the camera. If the two indicators on

the LAN port of the device don’t shine, check whether the IP camera is powered on or the

network cable is faulty.

3.2.2 Analog camera / coaxial HD camera connection *

⑴ Connect the video output of the camera or the speed dome to the video input VUDIO IN

of the IPC Tester video monitoring tester. The LCD screen of the device will display the image

of the camera.

⑵ Connect the RS485 control cable of the speed dome or camera PTZ to the RS485 port of

the IPC Tester of the video monitoring tester. Pay attention to the positive and negative

poles of the connection cable, positive to positive, negative to negative.

3.3 Function menu operation

Press the key 2 seconds to turn on

Press the key 2 seconds to turn off. The device prompts whether to shut down, click

"OK" to shut down the device.

Short press the key to enter sleep mode, press the key again to wake it up.

If the tester works abnormally and cannot be turned off, press the key several

seconds to turn off and reset.

3.3.1 UI

Bright and simple UI, the main page has several commonly used apps of our IPC equipment,

as shown below:

3.3.2 IPC Test app

When we open the IPC Test software on the main page, the software will

automatically search for the IP camera device in the LAN. Clicking the camera list on the left

panel will display the real-time screen of the camera. At the top left, it is the user name and

password. Click “Display” can show the password directly, it is convenient to check whether

the password is entered correctly. UI as follows:

When we click , we can increase the IP address and port of other devices in the LAN

to match.

Click to re-detect the IP camera device in the LAN.

Recording: Under the screen, the icon button can perform the recording function,

and the button color will change. When the color turns pink, the interface will prompt “Start

recording”.

When you click again, its color returns to normal, indicating that the recording has

ended and is saved in the video player .

Screenshot：When we click the icon button at the bottom, the image on the video

will be captured in real time, and the UI will also prompt the photo success. The picture will

be saved in the video player .

Video player: When we click on the player, it will jump to the video player interface,

which will display our video and photos, can click to play video or view photo.

Camera information: When we click , it will display information about the camera

equipment we tested, such as manufacturer, device model, device serial number, firmware

version, IP Address, Mac address, etc.

Setting: When we click , it will show two options, one is “IP Setting”, another one is

“Time Setting”.

IP Setting: Set IP Address of IP Camera

We can configure IP address, subnet mask, network management, DNS, etc. according to the

actual application scenario.

Time Setting: You can synchronize time with your computer on the network, or you can

manually set the time parameters.

Code stream selection：Click to select main stream or sub stream.

RTSP address query: Click to query the corresponding RTSP address and provide

convenient copy function.

Page is loading ...

Yuntai IPC-T5 User manual

Brand: Yuntai

Model: IPC-T5

Category: Video servers/encoders

Type: User manual

Yuntai IPC-T5

Download PDF

report

Yuntai IPC-T5 User manual

Yuntai IPC-T5 User manual

Other documents