Stinger SPTG1 User manual

SPTG1 Software User Manual

1. Connect SPTG1 with computer using a mini USB cable, the tester should turn

on automatically.

2. Open the folder “SPTG1 Software” and open this file.

3. If this is the first time you are opening it, the driver should install

automatically.

4. If you open the driver before you connect the tester to the computer, it will

display:

4. Please click “Cancel” and restart the program after you connect the tester

with computer.

6. When open, the user interface will look similar to the example below.

Select menu on SPTG1, then select Print Data to populate the left field. On

the left side will be the data from the SPTG1, the right side is for different

module, so just ignore.

7. Highlight, copy and paste into Notepad or a customer invoice.