Haunted Hill Farm FSHLJK018A-OR1 Installation guide

Brand: Haunted Hill Farm

Model: FSHLJK018A-OR1

Type: Installation guide

I. Diagram

II. Component list

No.

Name

Number

Lamp pendant

Lamp

Hold-nut

Hanging Chain

1 (59in)

Expansion tube + hook

Power wire

1 (11.5ft)

Adapter (12V AC 500mA)

Note

1, 2, 3 and 4 are power cable joints

III. Installation steps

Please install according to the figures and steps below:

A. Installation positioning

 It is suggested to hang the lamp 70 in. above the

floor to get the best view angle.

B. Fix the hook: Drill a hole on the ceiling above the

lamp to install expansion tube + hook (part #5);

C. Install hold-nut: Spin and fasten the hold-nut (part #3)

on the top of the lamp (part #2). Note: The hanging

chain (part #4) is already tied together with the

hold-nut; please make sure to fasten the hold-nut in

case it gets loose and falls down.

D. Connect power wire to the lamp: Insert the plug (2)

of the power wire (6) to the jack (1) on the top of the

lamp (2).

E. Hang lamp and arrange power wire: Hang the

hanging chain (4) and power wire (6) that have

already been fixed on the lamp (2) to the hook (5). You

can adjust the length of the chain according to the

distance between the lamp and the ceiling.

F. Power on: Connect the joint (3) of the power wire (6)

with the joint (4) of the adapter (7) and then connect

the adapter with the main power source.

G. Examination: When setting the switch on the bottom

of the lamp (2) (see the small figure under) to the left

side to start it, the lights in the lamp should light up,

motion should be active and music will start. If it fails to

perform such functions, it is necessary to check if the

joints 1, 2, 3 and 4 are well connected. You can also

turn the switch to the right side to turn off the music.

H. Install lamp pendan

t: Spin the lamp pendant (1) to

fasten it with the lamp (2);

I. Adjust direction: You can adjust the direction of the

lamp by spinning the direction of the hook (5) to your

satisfaction.

Caution

 This product is fragile and should be assembled

with care.

 Please follow the below steps and requirements

specified in the instruction to ensure safety and

reliability during the installation.

 Be sure to fix it on the ceiling securely.

 The product is not water proof, do not use it

outdoors.

Haunted Hill Farm FSHLJK018A-OR1 Installation guide

Haunted Hill Farm FSHLJK018A-OR1 Installation guide

Haunted Hill Farm FSHLJK018A-OR1 Installation guide

Other documents