IKEA IRIBT29MB is a spacious and energy-efficient refrigerator with a total capacity of 290 liters, perfect for families or those who love to cook and store plenty of fresh food. Its frost-free feature prevents ice buildup, saving you the hassle of manual defrosting. The refrigerator compartment features three adjustable glass shelves, a humidity-controlled drawer for fruits and vegetables, and three door bins for storing smaller items. The freezer compartment offers two spacious drawers for frozen foods and an ice cube tray.
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg1.jpg)
Service Manual
INDEX
Sno. Detail Page No.
Feature /Technical specification
Controls & Electronic configuration
Controlling the refrigerator temperature
1. MODEL RANGE
IKEA 260LT WHITE TOP MOUNT
REFRIGERATOR
IKEA 290LT STAINLESS TOP
MOUNT REFRIGERATOR
LAGAN fridge/freezer176/57Lwhite
AU
ENERGISK fridge/freezer
202/57L silver colour AU
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg4.jpg)
2. TECHNICAL /FEATURE SPECIFICATION
Electromechanical Control
in RC compartment
Quick Chill/Fast Forward
Cool Operation
EGA to celebrate Health
plank
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg5.jpg)
3. Electronic Configuration, Logic & Troubleshooting
GENX Controls & Electronics Configuration
Quick Chill/Fast Forward Ice
Yes (Radiant Heater 180 W)
DELUX: - In this type of refrigerator, there is no user Interface on freezer compartment door for setting
cooling .There is a thermostat in RC compartment to set temp settings.
RATED VOLTAGE : 220-240V,50-60Hz, IPH
VOLTAGE RANGE : 160V – 260V
INPUT WATTAGE : 120W
DEFROST WATTAGE : 180W
RATED CURRENT AMPS : 0.7A
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg6.jpg)
4. Wiring Diagram
GENX Dlx
Refrigerant Charging Qty:
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg7.jpg)
Note: -
There is no Service routine provided in this model.
In Dlx models Diagnosis of the Error / Sensor / Pot failure is not of continuous
nature.
In case of any detailed technical information please check with the Dlx technical
specification.
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg8.jpg)
5. Controlling the refrigerator temperature-
Dlx Models:
During Winter condition or when there is not much food stored in the refrigerator
This is the default and recommended setting. Can be used in normal usage.
During summers or when there is a lot of food stored in the refrigerator
During extreme summers or when you want faster cooling.
To control the temperature of your refrigerator. Turn the knob
according to your requirement. This control is provided inside the
refrigerator section. Turn knob to the left to reduce the cooling and to
the right to increase the cooling. It is preset to the middle position.
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg9.jpg)
6. Service Process:-
1. Separate FC door from refrigerator
2. Use 8mm round spanner and remove three screws of center hinge
3. Remove Center Hinge
4. Pick the RC door upward and separate from refrigerator
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bga.jpg)
FC PLENUM:-
1. Identify 2 screws of FC Plenum
2. Use Star screw driver and remove 2 screws of FC Plenum
3. Pull plenum down by inserting your fingers in the slot located at top center
4. Disconnect fan motor connectors
5. Separate FC Plenum from refrigerator
6. FC Plenum is mandatory to dismantle for dismantling of Thermal fuse, Bimetal, FC sensor, D heater etc.
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bgb.jpg)
INTERIOR PARTS OF FC PLENUM :-
1. Separate FC Plenum from refrigerator
2. Remove LHS EPS block
3. Remove RHS EPS block
4. Disconnect Thermal Fuse
5. Disconnect Bi metal
6. Disconnect FC sensor.
Precaution : All the components present interior to FC plenum must be fitted at their original location.
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bgc.jpg)
FAN MOTOR:-
1. Use star screw driver and open three screws of fan motor bracket fitted on plenum at back side.
2. Separate fan motor bracket
3. Use star screw driver to remove single screw of fan motor
4. Separate fan motor bracket cover
5. Pull the fan blade out
6. Separate fan blade from fan bracket
7. Separate Fan motor from refrigerator
8.
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bgd.jpg)
DEFROST HEATER:-
1. Separate FC Plenum from refrigerator
2. Disconnect Heater terminals
3. Pull out cooling coil slightly upwards and towards your side
4. Remove LHS and RHS EPS blocks
5. Remove Thermal Fuse
6. Take the black wire (thin) out
7. Take the white wire (thick) out
8. Cut white wire of defective heater at by wire cutter
9. Separate defrost heater from the machine
Note – All the models above 400L carries 200W integrated heater with evaporator. Need to remove as an assembly.
Part Code A2242730000
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bge.jpg)
DIFFUSER ASSEMBLY:-
1. Pull out the lens cover and bulb holder
2. Use star screw driver and remove 2 screws
3. Pull out assembly slightly from bottom (ensure 2 inserters will come out properly)
4. Pull out thermostat knob
5. Disconnect thermostat connector
6. Separate diffuser assembly from refrigerator.
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bgf.jpg)
INTERIOR PARTS OF DIFFUSER ASSEMBLY:-
- Thermostat
- Defrost Timer
1. Disconnect thermostat connectors
2. Separate thermostat from machine
3. Remove deodorizer cover
4. Use star screw driver and remove 1 screw
5. Disconnect D Timer connectors
6. Separate D Timer from refrigerator
BOTTOM HINGE:-
1. Use 8mm round spanner and open 2 screws from front side
2. Tilt the machine slightly at back side
3. Open 2 screws from bottom side
4. Separate bottom hinge from machine
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg10.jpg)
COMPRESSOR MOUNTING PLATE:-
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg11.jpg)
7. Exploded View:-
TOP HINGE COVER NEO-DLX WHITE
TOP HINGE COVER NEO-DLX CHARCOAL GRAY
SCREW- TRILOBULAR M6X1.0 HEX HEAD
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg12.jpg)
PLATE LEVELLER ASSEMBLY,GENX
PHILIPS HEAD SCREW M5.5X1.8
HINGE BOTTOM ASSEMBLY, GENX
CAP - CENTER RAIL WHITE TRINITY
SCREW-TRILOBULAR M6X1.0 HEX HEAD
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg13.jpg)
FC FOAMED DOOR WHITE GENX-2 FLUSH H
FC FOAMED DOOR REAL STEEL GENX-2 FLUSH
HANDLE FC FRONT FLUSH WHITE
HANDLE FC FRONT FLUSH EXPO WARM SILVER 2
HANDLE FC BACK FLUSH WHITE
HANDLE FC BACK FLUSH CHARCOAL GRAY
SCREW-CSK HEAD 4.8, DOOR STOPER- ONYX
![](//vs1.manuzoid.com/store/data-gzf/ebd726d956c70a98de804de7ee5dd26f/3/002032394.htmlex.zip/bg14.jpg)
KNOB - FREEZER DAMPER / THERMOSTAT,L 60
FC GLASS SHELF FRAME - GEN-X 2
M 4.2 X 16 SELF TAPPING SCREW - ONYX
Assly, Ice Twister, Removable with carton