2. Motorola
  3. Moto G
Moto G

Motorola Moto G Disassemble Manual

  • Hello! I am an AI chatbot trained to assist you with the Motorola Moto G Disassemble Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What tools are recommended for disassembling the Motorola Moto G?
    What is the first step in disassembling the Motorola Moto G?
    How do you remove the fourteen T5 torx screws that secure the protective cover/rear housing to the front housing/frame?
    How do you remove the battery from the Motorola Moto G?
    How do you disconnect the display assembly ribbon cable?
    How do you remove the earpiece speaker from the Motorola Moto G?
    How do you separate the display assembly from the front housing/frame?
•
•
•
•
•
•
•
5-0013 Small T5 Torx Screwdriver
5-0019 Plasc Opening Tools
5-0022 Nylon Spudger
5-0458 An-Stac Wrist Strap
5-1370 Fine Tip Curved Tweezers
5-1387 Precision Knife Set
Heat Gun/Blow Dryer
Motorola Moto G
DISASSEMBLE GUIDE
Page 1 of 7
Recommended Tools
hp://www.fixez.com/
This guide will show you how to completely disa
ssemble the Motorola Moto G smartphone, assisting in
making the DIY repair of the device simple, and safe. Following the comprehensive steps we have provided
will help you quickly replace not only a broken Moto G display assembly, but also any other internal
components that may have become faulty or damaged.
You can find a full archive of fixez.com disassemble guides and HD repair videos, for numerous makes and
models of smartphones and tablets, by vising hp://www.fixez.com.
Motorola Moto G – Disassemble Guide
Page 2 of 7
hp://www.fixez.com/
Near the dock connector toward the bottom of the
Moto G, insert the precision knife in the seam between
the front housing/frame and rear case.
This is a very tight seam so the use of the precision
knife is advised as oppose to the plastic opening tool.
1.
Once you have the first clip free, you can continue the
separation with your plastic opening tool. Work your
way around the entire smartphone, gently freeing the
clips until the rear case is removed.
2.
Next, locate and remove the fourteen T5 torx screws
that secure the protective cover/rear housing to the
front housing/frame (marked with orange circles).
You can now remove the protective cover/rear housing
from the Moto G (make sure to keep track of the power
& volume buttons).
3.
Motorola Moto G – Disassemble Guide
Page 3 of 7
hp://www.fixez.com/
Use the nylon spudger to gently pry up and disconnect
the battery cable from the motherboard. With the flat
side of the spudger carefully get under the battery, lift
it up from the securing adhesive and then remove it
from the Moto G.
4.
The front-facing camera should now be loose and easy
to lift out of the Moto G with the fine tip curved
tweezers.
5.
Next, use the fine tip curved tweezers to lift the blue
protective cover up and access the connection for the
display assembly (LCD & touch screen).
6.
Baery
Front-Facing Camera
Motorola Moto G – Disassemble Guide
Page 4 of 7
hp://www.fixez.com/
Now, locate the locking socket for the display assembly
ribbon cable. To release the cable, lift the opposite side
of the locking socket 90 degrees. You can now
disconnect the ribbon cable.
7.
The ribbon cable for the display assembly is secured to
the motherboard with adhesive. Utilize the heat gun to
soften the adhesive, making it easier to pry up the
cable from the motherboard.
8.
Next, utilize the flat side of the nylon spudger to
carefully remove the motherboard. Gently work the
spudger between the motherboard and the display
assembly/front housing to remove it from the Moto G.
9.
Motorola Moto G – Disassemble Guide
Page 5 of 7
hp://www.fixez.com/
The earpiece speaker is secured in its location with a
small amount of adhesive. Use your fine tip curved
tweezers to easily remove it from the Motorola
smartphone.
10.
At this time, the display assembly (LCD & touch screen)
is fused together and cannot be separated. It is secured
to the front housing/frame of the smartphone with a
generous amount of adhesive that will require heat and
patience to separate.
This procedure is only recommended on a Moto G
with a damaged screen that requires replacement.
Use the heat gun to begin warming up the adhesive
securing the LCD & touch screen digitizer assembly to
the smartphone’s front housing/frame.
11.
To begin separation of the display assembly from the
Moto G front housing/frame, securely grip the sides of
the smartphone and slip the precision knife under the
display assembly.
12.
Earpiece Speaker
Display Assembly (LCD & Touch Screen Digizer)
Motorola Moto G – Disassemble Guide
Page 6 of 7
hp://www.fixez.com/
Now, utilizing the plastic opening tool continue around
the entire perimeter of the Moto G until the display
assembly is completely separated.
13.
Breakdown
Motorola Moto G – Disassemble Guide
Page 7 of 7
hp://www.fixez.com/
1. Motorola Moto G Back Cover
2. Motorola Moto G Rear Housing/Protective Cover
3. Motorola Moto G Frame/Front Housing
4. Motorola Moto G Display Assembly (LCD & Touch Screen)
5. Motorola Moto G Motherboard
6. Motorola Moto G Battery
7 Motorola Moto G Earpiece Speaker
8. Motorola Moto G Front-Facing Camera
9. Motorola Moto G Volume Button
10. Motorola Moto G Power Button
1 2 3 4
5
6
7 8
9
10
Noce/Warning:
FIXEZ.COM DOES NOT ACCEPT ANY LIABILITY FOR DAMAGE, OR INJURY CAUSED, WHILE YOU ARE
FOLLOWING OUR DISASSEMBLE GUIDES. WE MAKE NO REPRESENTATIONS, WARRANTIES, OR
CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED. UTILIZING THESE GUIDES TO HELP ASSIST YOU IN
REPAIRING YOUR MOBILE DEVICES WILL VOID YOUR WARRANTY. FIXEZ.COM STRICTLY PROHIBITS
ALTERING OR MODIFYING OUR DISASSEMBLE GUIDES FOR COMMERCIAL USE, REPRODUCTION, OR
PUBLICATION.
/