Motorola moto x Disassemble Manual

Brand: Motorola

Model: moto x

Type: Disassemble Manual

Motorola moto x is an advanced smartphone that offers a range of capabilities to enhance your mobile experience. With its intuitive interface and powerful features, you can stay connected, entertained, and productive on the go. Capture stunning photos and videos with the high-resolution camera, and enjoy immersive multimedia with the vibrant display. Stay organized and efficient with a range of productivity tools, and customize your phone with a variety of apps from the Google Play Store.

•

5-0013 T5 Torx Screwdriver

5-0019 Plasc Opening Tools

5-0022 Nylon Spudger

5-0458 An-Stac Wrist Strap

5-1342 SIM Card Ejecon Tool

5-1370 Fine Tip Curved Tweezers

5-1387 Precision Knife Set

Heat Gun/Blow Dryer

Motorola Moto X

DISASSEMBLE GUIDE

Page 1 of 7

Recommended Tools

hp://www.ﬁxez.com/

This guide will show you how to completely disassemble the Motorola Moto X smartphone, assisng in making

the DIY repair of the device simple, and safe. Following the comprehensive steps we have provided will help

you quickly replace not only a broken Moto X display assembly (LCD & touch screen), but also any other internal

components that may have become faulty or damaged.

You can ﬁnd a full archive of ﬁxez.com disassemble guides and HD repair videos, for numerous makes and

models of smartphones and tablets, by vising hp://www.ﬁxez.com.

Motorola Moto X – Disassemble Guide

Page 2 of 7

hp://www.ﬁxez.com/

Locate the SIM card tray on the side of the smartphone

and utilize a SIM card ejection tool, or paper clip, to

release and remove the tray from the Moto X.

Next, near the dock connector on the bottom of the

smartphone, insert the precision knife in the seam that

separates the frame/front housing and rear cover. The

seam is very tight so we used the precision knife

instead of a plastic opening tool or spudger.

Once the first clip is released, you can continue around

the perimeter of the Moto X with your plastic opening

tool gently freeing the clips.

Motorola Moto X – Disassemble Guide

Page 3 of 7

hp://www.ﬁxez.com/

Before completely removing the rear cover you need to

release the camera flash ribbon cable from its socket.

Release the cable by lifting the side opposite the cable

up 90 degrees.

You can now remove the rear case from the Moto X (be

sure to keep track of the power & volume buttons).

Next, locate and remove the eleven T5 torx

screws that secure the upper & lower protective

covers/housing to the motherboard (marked with

orange circles).

First, remove the lower protective cover; it should

release easily with the securing screws removed.

Baery

Motorola Moto X – Disassemble Guide

Page 4 of 7

hp://www.ﬁxez.com/

Next, remove the upper cover; it should release just as

easily from the motherboard.

There are four connectors (marked with orange

rectangles) that need to be released. The connector

that rests upon the battery is a locking socket that

needs to be disconnected before removing the ribbon

cable. The other three connections can be pried up and

released.

Now, slide the flat end of the spudger under the battery

and carefully lift it up from the securing adhesive. You

can now remove the battery from the Moto X.

Motorola Moto X – Disassemble Guide

Page 5 of 7

hp://www.ﬁxez.com/

The front-facing camera is housed in the upper corner

of the Motorola smartphone. Use the fine tip curved

tweezers to pry the connector up from the

motherboard and remove the front-facing camera

from the Moto X.

10.

Use the fine tip curved tweezers to pry up the earpiece

speaker from its securing adhesive and remove it from

the smartphone.

11.

Next, use the flat end of the spudger to carefully

separate the display assembly from the motherboard.

There is a ribbon cable that needs to be released before

you can completely remove the motherboard (marked

with orange arrow).

12.

Front-Facing Camera

Earpiece Speaker

Motorola Moto X – Disassemble Guide

Page 6 of 7

hp://www.ﬁxez.com/

The rear-facing camera rests on the bottom side of the

motherboard. Use the fine tip curved tweezers to

release the locking socket and disconnect the ribbon

cable, freeing the rear-facing camera for removal from

the Moto X.

13.

The power and volume button flex cable is located on

the back of the display assembly and frame of the

Moto X. Use the fine tip curved tweezers to peel the

ribbon cable from the securing adhesive. The use of a

heat gun or blow dryer is encouraged to free and

carefully remove the power and volume button flex

cable.

14.

Rear-Facing Camera

Power & Volume Buon Flex Cable

Breakdown

Motorola Moto X – Disassemble Guide

Page 7 of 7

hp://www.ﬁxez.com/

Motorola Moto X Back Battery Cover

2. Motorola Moto X Motherboard

3. Motorola Moto X Display Assembly (LCD & Touch Screen)

with the Frame

4. Motorola Moto X Battery

5. Motorola Moto X Power & Volume Button Flex Cable

6. Motorola Moto X Top Protective Cover/Housing

7. Motorola Moto X Rear-Facing Camera

8. Motorola Moto X Front-Facing Camera

9. Motorola Moto X Earpiece Speaker

10. Motorola Moto X SIM Card Tray

11. Motorola Moto X Bottom Protective Cover/Housing

Noce/Warning:

FIXEZ.COM DOES NOT ACCEPT ANY LIABILITY FOR DAMAGE, OR INJURY CAUSED, WHILE YOU ARE

FOLLOWING OUR DISASSEMBLE GUIDES. WE MAKE NO REPRESENTATIONS, WARRANTIES, OR

CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED. UTILIZING THESE GUIDES TO HELP ASSIST YOU IN

REPAIRING YOUR MOBILE DEVICES WILL VOID YOUR WARRANTY. FIXEZ.COM STRICTLY PROHIBITS

ALTERING OR MODIFYING OUR DISASSEMBLE GUIDES FOR COMMERCIAL USE, REPRODUCTION, OR

PUBLICATION.

Motorola moto x Disassemble Manual

Motorola moto x Disassemble Manual

Motorola moto x Disassemble Manual

Related papers

Other documents