ICP PCI-1800HU-S User manual

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 1

PCI-1202/1602/180x Software Manual

(for Windows 98/NT/2K/XP)

Warranty

All products manufactured by ICP DAS are warranted against defective

materials for a period of one year from the date of delivery to the original purchaser.

Warning

ICP DAS assumes no liability for damage consequent to the use of this

product. ICP DAS reserves the right to change this manual at any time without

notice. The information furnished by ICP DAS is believed to be accurate and reliable.

However, no responsibility is assumed by ICP DAS for its use, nor for any

infringements of patents or other rights of third parties resulting from its use.

Copyright

Trademark

The names used for identification only may be registered trademarks of their

respective companies.

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 2

Table of Contents

1.

INTRODUCTION ......................................................4

1.1 F

UNCTION

D

EFINE

.........................................................................5

1.2 E

RROR

C

ODE

D

EFINE

...................................................................8

1.3 C

ONFIGURATION

C

ODE

..................................................................9

1.4 P

RIORITY

...................................................................................10

2. DESCRIPTION OF FUNCTIONS ...........................11

2.1 T

HE

T

ESTING

F

UNCTIONS

............................................................12

2.1.0

P1202_FloatSub2.........................................................................................................12

2.1.1

P1202_ShortSub2..........................................................................................................12

2.1.2

P1202_GetDllVersion ....................................................................................................13

2.1.3

P1202_GetDriverVersion...............................................................................................13

2.2 T

HE

D

RIVER

F

UNCTIONS

..............................................................14

2.2.0

P1202_DriverInit...........................................................................................................14

2.2.1

P1202_DriverClose........................................................................................................14

2.2.2

P1202_GetConfigAddressSpace..................................................................................15

2.2.3

P1202_WhichBoardActive.............................................................................................15

2.2.4

P1202_ActiveBoard ......................................................................................................16

2.3 T

HE

DIO F

UNCTIONS

..................................................................17

2.3.0

P1202_Di ......................................................................................................................17

2.3.1

P1202_Do.....................................................................................................................17

2.4 T

HE

DA F

UNCTIONS

....................................................................18

2.4.0

P1202_Da.....................................................................................................................18

2.5 T

HE

AD F

UNCTIONS

....................................................................19

2.5.0

Introduction ...................................................................................................................19

2.5.1

P1202_SetChannelConfig.............................................................................................20

2.5.2

P1202_AdPolling...........................................................................................................20

2.5.3

P1202_AdsPolling.........................................................................................................21

2.5.4

P1202_AdsPacer..........................................................................................................22

2.6 T

HE

M

AGIC

S

CAN

........................................................................23

2.6.0

Introduction ...................................................................................................................23

2.6.1

P1202_ClearScan..........................................................................................................24

2.6.2

P1202_StartScan..........................................................................................................25

2.6.3

P1202_StartScanPostTrg.............................................................................................26

2.6.4

P1202_StartScanPreTrg...............................................................................................27

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 3

2.6.5

P1202_StartScanMiddleTrg..........................................................................................28

2.6.6

P1202_ReadScanStatus...............................................................................................29

2.6.7

P1202_AddToScan.......................................................................................................31

2.6.8

P1202_SaveScan .........................................................................................................33

2.6.9

P1202_WaitMagicScanFinish.......................................................................................34

2.6.10

P1202_StopMagicScan................................................................................................36

2.7 T

HE

M_F

UNCTIONS

.....................................................................37

2.7.0

Introduction ...................................................................................................................37

2.7.1

P1202_M_FUN_1.........................................................................................................38

2.7.2

P1202_M_FUN_2.........................................................................................................40

2.7.3

P1202_M_FUN_3.........................................................................................................41

2.8 T

HE

S

INGLE

B

OARD

B

ATCH

C

APTURE

...........................................43

2.8.0

Introduction ...................................................................................................................43

2.8.1

P1202_FunB_Start........................................................................................................44

2.8.2

P1202_FunB_ReadStatus ............................................................................................45

2.8.3

P1202_FunB_Stop........................................................................................................46

2.8.4

P1202_FunB_Get.........................................................................................................46

2.9 M

ULTI

-

BOARD

B

ATCH

C

APTURE

....................................................47

2.9.0

P1202_FunA_Start........................................................................................................47

2.9.1

P1202_FunA_ReadStatus ............................................................................................48

2.9.2

P1202_FunA_Stop........................................................................................................48

2.9.3

P1202_FunA_Get.........................................................................................................49

2.10 T

HE

C

ONTINUOUS

C

APTURE

........................................................50

2.10.0

Introduction....................................................................................................................50

2.10.1

P1202_Card0_StartScan...............................................................................................51

2.10.2

P1202_Card0_ReadStatus............................................................................................52

2.10.3

P1202_Card0_Stop.......................................................................................................53

2.10.4

P1202_Card1_StartScan...............................................................................................54

2.10.5

P1202_Card1_ReadStatus............................................................................................55

2.10.6

P1202_Card1_Stop.......................................................................................................56

2.11 T

HE

O

THER

F

UNCTIONS

..............................................................57

2.11.0

P1202_DelayUs.............................................................................................................57

3.

APPENDIX

................................................................58

4.

DEMO

......................................................................59

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 4

1. Introduction

PCI-1202/1602/180x Development Toolkit provides DLL (Dynamic Link Library) and

simple DEMOs. Those DEMOs will show you how easy to use DLL to complete the

I/O process without facing complex hardware.

This document introduces PCI-1202, PCI-1602, and PCI-180x series functions

in the DLL. It is intended to be a companion to know functions, using the special

functions (Continuous Capture, MagicScan...), programming, and error code

information.

These DLL can perform a variety of data acquisition operation as follows:

1. Testing function

2. Plag & Play function

3. DIO function

4. DA function

5. AD funciton

6. MagicScan function

7. M_Function

8. Continuous Capture function

9. Batch Capture function

Section 1.1 : Functions categories and define.

Section 1.2 : Error code define.

Section 1.3 : The list of Configuration code that can control amplifier signal.

Section 1.4 : The list of thread priority setting.

(With the priority setting, you can get higher thread priority in the OS.)

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 5

1.1 Function Define

When you read the function manual, please notice the "KeyWORD" for variables.

KeyWORD

Set before call

functions

Set after call functions and return

value

[Input] Yes No

[Output] No Yes

The functions in the PCI-1202 DLL are divided into 9 categories. (The red WORD

"P1202" of functions name could be replaced with "P1602" or "P180x" to use the

functions which have the same purpose defined in P1602 or P180x DLL.)

Example:

P1202_ClearScan(Void)P1602_ClearScan(Void) or P180x_ClearScan(Void)

Category Functions Define

float P1202_FloatSub2(float fA, float fB);

short P1202_ShortSub2(short nA, short nB);

WORD P1202_GetDllVersion(Void);

Test

WORD P1202_GetDriverVersion(WORD *wVxdVersion);

WORD P1202_DriverInit(WORD *wTotalBoards);

Void P1202_DriverClose(Void);

WORD P1202_GetConfigAddressSpace(WORD wBoardNo,

WORD *wAddrTimer,WORD *wAddrCtrl, WORD *wAddrDio, WORD *wAddrAdda);

WORD P1202_ActiveBoard( WORD wBoardNo )

Driver

WORD P1202_WhichBoardActive(Void);

WORD P1202_Di(WORD *wDi);

Digital I/O

WORD P1202_Do(WORD wDo);

D/A

WORD P1202_Da(WORD wDaChannel, WORD wDaVal);

WORD P1202_SetChannelConfig(WORD wAdChannel, WORD wConfig);

WORD P1202_AdPolling(float *fAdVal);

WORD P1202_AdsPolling(float fAdVal[], WORD wNum);

A/D

WORD P1202_AdsPacer(float fAdVal[], WORD wNum, WORD wSampleDiv);

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 6

Category Functions Define

WORD P1202_ClearScan(Void);

WORD P1202_StartScan(WORD wSampleRateDiv, DWORD dwNum, SHORT nPriority);

WORD P1202_StartScanPostTrg(WORD wSampleRateDiv, DWORD dwNum, SHORT

nPriority);

WORD P1202_StartScanPreTrg(WORD wSampleRateDiv, DWORD dwNum, SHORT

nPriority);

WORD P1202_StartScanMiddleTrg(WORD wSampleRateDiv, DWORD dwNum, DWORD

dwN2, SHORT nPriority);

WORD P1202_StartScanPreTrgVerC(WORD wSampleRateDiv, DWORD dwNum, SHORT

nPriority);

WORD P1202_StartScanMiddleTrgVerC(WORD wSampleRateDiv, DWORD dwNum, DWORD

dwN2,SHORT nPriority);

Void P1202_ReadScanStatus(WORD *wStatus, DWORD *dwLowAlarm, DWORD

*dwHighAlarm);

WORD P1202_AddToScan(WORD wAdChannel, WORD wConfig, WORD wAverage, WORD

wLowAlarm, WORD wHighAlarm, WORD wAlarmType);

WORD P1202_SaveScan(WORD wAdChannel, WORD wBuf[]);

Void P1202_WaitMagicScanFinish(WORD *wStatus, DWORD *dwLowAlarm, DWORD

*dwHighAlarm);

Magic

WORD P1202_StopMagicScan();

WORD P1202_M_FUN_1(WORD wDaNumber, WORD wDaWave, float fDaAmplitude, WORD

wAdSampleRateDiv, WORD wAdNumber, WORD wAdConfig, float fAdBuf[], float fLowAlarm,

float HighAlarm);

WORD P1202_M_FUN_2(WORD wDaNumber, WORD wDaWave, WORD wDaBuf[], WORD

wAdSampleRateDiv, WORD wAdNumber, WORD wAdConfig, WORD wAdBuf[]);

WORD P1202_M_FUN_3(WORD wDaNumber, WORD wDaWave, float fDaAmplitude, WORD

wAdSampleRateDiv, WORD wAdNumber, WORD wChannelStatus[], WORD wAdConfig[], float

fAdBuf[], float fLowAlarm, float fHighAlarm);

M_Function

WORD P1202_M_FUN_4(WORD wType, WORD wDaNumber, WORD wDaWave, float

fDaAmplitude, WORD wAdSampleRateDiv, WORD wAdNumber, WORD wChannelStatus[],

WORD wAdConfig[], float fAdBuf[], float fLowAlarm, float fHighAlarm);

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 7

Category Functions Define

WORD P1202_Card0_StartScan(WORD wSampleRate, WORD wChannelStatus[], WORD

wChannelConfig[],WORD wCount);

WORD P1202_Card0_ReadStatus(WORD wBuf[], WORD wBuf2[], DWORD *dwP1, DWORD

*dwP2, WORD *wStatus);

Void P1202_Card0_Stop(Void);

WORD P1202_Card1_StartScan(WORD wSampleRate,

WORD wChannelStatus[],WORD wChannelConfig[],WORD wCount);

WORD P1202_Card1_ReadStatus(WORD wBuf[], WORD wBuf2[], DWORD *dwP1, DWORD

*dwP2,WORD *wStatus);

Void P1202_Card1_Stop(Void);

Continuous

Capture

WORD P1202_FunA_Start(WORD wClock0Div, WORD wChannel0[], WORD wConfig0[],

WORD Buffer0, DWORD dwMaxCount0, WORD wClock1Div, WORD wChannel1[], WORD

wConfig1[], WORD *Buffer1, DWORD dwMaxCount1, SHORT nPriority);

WORD P1202_FunA_ReadStatus(Void);

WORD P1202_FunA_Stop(Void);

WORD P1202_FunA_Get(DWORD *P0, DWORD *P1);

WORD P1202_FunB_Start(WORD wClock0Div, WORD wChannel0[],

WORD wConfig0[], WORD *Buffer0, DWORD dwMaxCount0, SHORT nPriority);

WORD P1202_FunB_ReadStatus(Void);

WORD P1202_FunB_Stop(Void);

Batch

Capture

WORD P1202_FunB_Get(DWORD *P0);

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 8

1.2 Error Code Define

Error Code Define Table

Return Value Define Describe

0 NoError No error.

1 DriverHandleError

Invalid VxD/SYS handle. Note 1

2 DriverCallError

Call VxD/SYS error. Note 1

3

AdControllerError

A/D controller error. May be hardware error, please

contact agent.

4 M_FunExecError M_Functions Error.

5 ConfigCodeError A/D config error.

7 HighAlarm fAdBuf[?]>fHighAlarm

8 LowAlarm fAdBuf[?]< fLowAlarm

9 AdPollingTimeOut

AdPolling TimeOut.Note1

10 AlarmTypeError Alarm type error.

11 FindBoardError Found board error.

12 AdChannelError Invalid A/D channel.

13 DaChannelError Invalid D/A channel.(D/A channel must be 0 or 1)

14 InvalidateDelay dwDelayUs > 8191.

15 DelayTimeOut Delay TimeOut.

16 InvalidateData Invalid data.

17 FifoOverflow FIFO overflow.

18 TimeOut TimeOut.

19 ExceedBoardNumber Invalid board number. (First board number is 0)

20 NotFoundBoard

Can't detect board.Note1

22 FindTwoBoardError Can't detect second board.

23 ThreadCreateError Create thread error.

24 StopError Stop error.

25 AllocateMemoryError Allocate memory error.

Note 1: Please update driver and restart PC.

To get more information about the last release driver, please refer to

http://www.icpdas.com/download/pci/index.htm

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 9

1.3 Configuration Code

PCI-1002L/1800L/1802L Configuration Code Table

Bipolar/Unipolar

Analog Input

Signal Range

Gain

Settling Time

Configuration

Code

Bipolar +/- 5V 1 3 us 0x00

Bipolar +/- 2.5V 2 3 us 0x01

Bipolar +/- 1.25V 4 3 us 0x02

Bipolar +/- 0.625V 8 3 us 0x03

Bipolar +/- 10V 0.5 3 us 0x04

Bipolar +/- 5V 1 3 us 0x05

Bipolar +/- 2.5V 2 3 us 0x06

Bipolar +/- 1.25V 4 3 us 0x07

Unipolar 0V ~ 10V 1 3 us 0x08

Unipolar 0V ~ 5V 2 3 us 0x09

Unipolar 0V ~ 2.5V 4 3 us 0x0A

Unipolar 0V ~ 1.25V 8 3 us 0x0B

PCI-1202H/1800H/1802H Configuration Code Table

Bipolar/Unipolar

Analog Input

Signal Range

Gain

Settling Time

Configuration

Code

Bipolar +/- 5V 1 23 us 0x10

Bipolar +/- 0.5V 10 28 us 0x11

Bipolar +/- 0.05V 100 140 us 0x12

Bipolar +/- 0.005V 1000 1300 us 0x13

Bipolar +/- 10V 0.5 23 us 0x14

Bipolar +/- 1V 5 28 us 0x15

Bipolar +/- 0.1V 50 140 us 0x16

Bipolar +/- 0.01V 500 1300 us 0x17

Unipolar 0V ~ 10V 1 23 us 0x18

Unipolar 0V ~ 1V 10 28 us 0x19

Unipolar 0V ~ 0.1V 100 140 us 0x1A

Unipolar 0V ~ 0.01V 1000 1300 us 0x1B

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 10

PCI-1602 Configuration Code Table

Bipolar/Unipolar

Analog Input

Signal Range

Gain

Settling

Time

Configuration

Code

Bipolar +/- 10V 1 3 us 0

Bipolar +/- 5V 2 3 us 1

Bipolar +/- 2.5V 4 3 us 2

Bipolar +/- 1.25V 8 3 us 3

1.4 Priority

Thread's Priority Setting Table

Setting Define

-2 THREAD_PRIORITY_LOWEST

-1 THREAD_PRIORITY_BELOW_NORMAL

0(Defual) THREAD_PRIORITY_NORMAL

1 THREAD_PRIORITY_ABOVE_NORMAL

2 THREAD_PRIORITY_HIGHEST

15 THREAD_PRIORITY_TIME_CRITICAL

Others THREAD_PRIORITY_NORMAL

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 11

2. Description of Functions

The following list divides functions in the PCI-1202 DLL into 9 categories.

 Testing function

 Plag&Play function

 DIO function

 DA function

 AD funciton

 MagicScan function

 M_Function

 Continuous Capture function

 Batch Capture function

In Section 1.1, the functions in each category are already listed in a table. This

section will explain functions more detail about function, syntax, parameters,

error code and the related DEMO.

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 12

2.1 The Testing Functions

2.1.0 P1202_FloatSub2

Calculate C=A-B in float format, float=4 bytes floating point number.

This function is provided for testing DLL linkage.



Syntax :

float P1202_FloatSub2(float fA, float fB);



Parameters :

fA : [Input] 4 bytes floating point value

fB : [Input] 4 bytes floating point value



Return :

Return = fA - fB



Demo :

DEMO1.C

2.1.1 P1202_ShortSub2

Calculate C=A-B in SHORT format, SHORT=16 bits signed number.

This function is provided for testing DLL linkage.



Syntax :

short P1202_ShortSub2(Short nA, Short nB);



Parameters :

nA : [Input] 16 bits value

nB : [Input] 16 bits value



Return :

Return = nA - nB



Demo :

DEMO1.C

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 13

2.1.2 P1202_GetDllVersion

Read the DLL version number of P1202.DLL.



Syntax :

WORD P1202_GetDllVersion(Void);



Parameter :

Void



Return :

Return = DLL version number

Ex.: return = 0x200, the DLL version is 2.0.



Demo :

DEMO1.C

2.1.3 P1202_GetDriverVersion

This subroutine will read the driver version number of Nappci.VxD in

Windows 95/98 or Napwnt.SYS in Windows NT.



Syntax :

WORD P1202_GetDriverVersion(WORD *wDriverVersion);



Parameter :

*wDriverVersion : [output] *wDriverVersion: address of wDriverVersion

Ex: wDriverVersion=0x200, the driver version is 2.0



Return :

0 : No Error

Others : Please refer to sec. 1.2



Demo :

DEMO1.C

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 14

2.2 The Driver Functions

2.2.0 P1202_DriverInit

Allocate resources needed from system and return the total board number in the

system. This function must be called once before using the I/O functions.



Syntax :

WORD P1202_DriverInit(WORD *wTotalBoard);



Parameter :

*wTotalBoard :[Output] *wTotalBoard: address of wTotalBoard

wTotalBoard=1  one PCI-1202 card in the system

wTotalBoard=n  n*PCI-1202 cards in the system



Return :

0 : No Error

Others : Please refer to sec. 1.2.



Demo :

All demo programs.

2.2.1 P1202_DriverClose

This function will return the resources allocated from system. It must be called

once at the end of program.



Syntax :

Void P1202_DriverClose(Void);



Parameter :

Void



Return :

Void



Demo :

All demo programs.

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 15

2.2.2 P1202_GetConfigAddressSpace

Get the I/O address of PCI-1202 board n. This function is for debug. It is not

necessary to call this function in an application.



Syntax :

WORD P1202_GetConfigAddressSpace(WORD wBoardNo, WORD

*wAddrTimer,WORD *wAddrCtrl, WORD *wAddrDio, WORD *wAddrAdda);



Parameters :

wBoardNo: [Input] PCI-1202 board number (Start from 0)

*wAddrTimer: [Output] Get 8254 Timer I/O address map

*wAddrCtrl: [Output] Get Controller I/O address map

*wAddrDio: [Output] Get Digital I/O Port I/O address map

*wAddrAdda: [Output] Get A/D and D/A I/O address map

* Please refer to “PCI-1202/1602/1800/1802 Hardware manual” Chapter 3 for

more information,



Return :

0 : No Error

Others : Please refer to sec. 1.2.



Demo :

DEMO1.C

2.2.3 P1202_WhichBoardActive

Return the active board number.



Syntax:

WORD

P1202_WhichBoardActive(Void);



Parameter :

Void



Return :

Board number of the active board. (Start from 0)

First card => 0

Second card => 1



Demo :

DEMO1.C

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 16

2.2.4 P1202_ActiveBoard

This function sets one of the PCI-1202 boards active.

*This function must be called once before the D/I/O, A/D, D/A functions

.



Syntax :

WORD P1202_ActiveBoard(WORD wBoardNo);



Parameter :

wBoardNo: [Input] board number (Start from 0).



Return :

0 : No Error

Others : Please refer to sec. 1.2.



Demo :

All DEMO programs.



Reference :

The P1202_ActiveBoard(…) will take effect on all functions except the following:

P1202_FloatSub2

P1202_ShortSub2

P1202_GetDriverVersion

P1202_DriveInit

P1202_DriveClose

P1202_GetConfigAddressSpace

P1202_Card0_StartScan

P1202_Card0_ReadData

P1202_Card0_Stop

P1202_Card1_StartScan

P1202_Card1_ReadData

P1202_Card1_Stop

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 17

2.3 The DIO Functions

2.3.0 P1202_Di

This subroutine will read the 16 bits data from DI port.

*This function will refer to the current active PCI-1202. Use the

P1202_ActiveBoard(….) to set the active board.



Syntax :

WORD P1202_Di(WORD *wDi);



Parameter :

*wDi : [Output] address of wDi which store the 16 bits DI data



Return :

0 : No Error

Others : Please refer to sec. 1.2.



Demo :

DEMO1.C

2.3.1 P1202_Do

This subroutine will send the 16 bits data to DO port.

*This function will refer to the current active PCI-1202 board. Use the

P1202_ActiveBoard(….) to set the active board.



Syntax :

WORD P1202_Do(WORD wDo);



Parameter :

wDo : [Input] the 16 bits data sent to DO port



Return :

0 : No Error

Others : Please refer to sec. 1.2.



Demo :

DEMO1.C

When CN1 connect with CN2：

P1202_Do(0x10) ;//Output 0x10

P1202_Di(*wDi) ;//*wDi=0x10 Input

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 18

2.4 The DA Functions

2.4.0 P1202_Da

This subroutine will send the 12 bits data to DA port.

*This function will refer to the current active PCI-1202 board. Use the

P1202_ActiveBoard(….) to set the active board.



Syntax :

WORD P1202_Da(WORD wChannel, WORD wDaVal);



Parameters :

wChannel : [Input] Analog output channel.

wChannel=0 (analog output Channel 0)

wChannel=1 (analog output Channel 1)

wDaVal : [Input] 12 bits data sent to DA port. 0=minimum and 4095=maximum.

The DA output can be +/- 5V or +/- 10V depending on the setting of hardware

JP1. The software can’t detect the state of JP1. So the maximum wDaVal

“4095” may be +5V or +10V



Return :

0 : No Error

Others : Please refer to sec. 1.2.



Demo :

DEMO1.C

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 19

2.5 The AD Functions

2.5.0 Introduction

AD/DA Polling Function process

P1202_DriverInit

():

Driver Initial and Get Resource

P1202_DriverClose() : Close Driver and Release Resource

P1202_ActiveBoard( ): Active Board

P1202_SetChannelConfig(): Set Channel and Config

P1202_AdsPolling(): Get A/D, D/A Value

or P1202_AdPolling(), P1202_AdsPacer(), P1202_Da()

PCI-1202 Software Manual

Version 2.05 Date: Jan-8, 2007 Page: 20

2.5.1 P1202_SetChannelConfig

This subroutine is used to set the AD channel configuration code. (Refer to

section 1.3) It also sets the active AD channel for P1202_AdPolling,

P1202_AdsPolling and P1202_AdsPacer.

*This function will refer to the current active PCI-1202 board. Use the

P1202_ActiveBoard(….) to set the active board.



Syntax :

WORD P1202_SetChannelConfig(WORD wChannel, WORD wConfig);



Parameters :

wChannel : [Input] AD channel number

wConfig : [Input] Configuration code. Refer to "Section 1.3 Configuration Table"



Return :

0 : No Error

Others : Please refer to section 1.2.



Demo :

DEMO1.C

2.5.2 P1202_AdPolling

This function will perform a single A/D conversion by software polling. The

P1202_SetChannelConfig function is used to change the active channel and

configuration code that the P1202_AdPolling function using.

*This function will refer to the current active PCI-1202 board. Use the

P1202_ActiveBoard(….) to set the active board.



Syntax :

WORD P1202_AdPolling(float *fAdVal);



Parameter :

*fAdVal :[Output] address of fAdVal which store the AD data, this data is

automatically computed from hexadecimal to float based on the setting of

P1202_SetChannelConfig.



Return :

0 : No Error

Others : Please refer to section 1.2.



Demo :

DEMO1.C

Page is loading ...

ICP PCI-1800HU-S User manual

ICP PCI-1800HU-S User manual

Related papers

Other documents