IMPORTANT:

• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.

• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!

• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!

CONNECTING THE WIRES

4.Attachthexture’swirestothepowersupplywiresfromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite(or

ribbed);groundtoground(greenorcopper).Twisttheendsofthewirepairstogether,thentwistonawireconnector.Makesure

alltwistsareinthesamedirection.Ifthereisnogroundwire(greenorcopper)fromthejunctionbox,locategroundscrew(E)on

mountingstrap(B)andwrapthexture’sgroundwirearoundthegreengroundscrew(E).Useascrewdrivertosecuregroundscrew

7.Twistlightbulb(notprovided)intosocket(G).Donotexceedthemaximumrecommendedwattage.

Yourinstallationiscomplete.Turnonthepowerandtestthexture.

For Customer Service, please

contact the place of purchase.

AssemblyInstructions:2635-BA1 (Amari)

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

PREPARING FOR INSTALLATION

Removeallofthecontentsfromthecarton.See

Youmayneedtotightenhexnuts(C)thatholdthe

screwsinplace.

2.Placemountingstrap(B)uptoyourjunction

box.Placebackplate(F)overthemountingstrap

liningupmountingscrews(D)withtheholesin

backplate(F).Thiswillallowyoutoensurethat

youarehangingthexturestraight.

3.Pullthehousewiresthroughthecenterof

mountingstrap(B).Securemountingstrap(B)to

thejunctionboxwithmountingscrews(A)anda