Tiptel SP1005 User manual

SP1005
Tiptel
Brand
Tiptel
Model
SP1005
Category
Fire protection
Type
User manual

This manual is also suitable for

Tiptel SP1005 is a 4-port PoE switch with IEEE 802af/at standard, which supports PoE+ and Port priority, with a maximum PoE power of 30W for each PoE port and a total of 96W. It features auto-detection of the power receiving device, plug-and-play connectivity, and visual LED indicators for link and power status. The switch supports 10/100/1000Mbps speeds, auto-negotiation, and auto MDI/MDIX, ensuring seamless integration with various devices.

Tiptel SP1005 is a 4-port PoE switch with IEEE 802af/at standard, which supports PoE+ and Port priority, with a maximum PoE power of 30W for each PoE port and a total of 96W. It features auto-detection of the power receiving device, plug-and-play connectivity, and visual LED indicators for link and power status. The switch supports 10/100/1000Mbps speeds, auto-negotiation, and auto MDI/MDIX, ensuring seamless integration with various devices.

Quick Start Guide (UK)
Important Safeguards and Warnings
Attention:
Please read the following safeguards and warnings carefully before using the product in
order to avoid damages and losses.
Note:
Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or
electric shock.
Do not install the device at position exposed to sunlight or in high temperature.
Temperature rise in the device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
The device must be installed on solid and flat surfaces in order to guarantee safety.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise,
temperature in the device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instructions.
Warning:
Please use the battery properly to avoid fire, explosion and other dangers.
Please replace the battery with a battery of the same type.
Do not use power line other than the one specified. Please use it properly. Otherwise,
it may cause fire or electric shock.
Special Announcement:
This manual is for reference only.
All the designs and software here may be subject to change without prior written
notice.
All trademarks and registered trademarks are the properties of their respective
owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website for more information.
Applicable Models:
The manual can be applied to the following models: SP1005, SP1009
Product Overview
1.1 Main Features
10/100/1000Mbps RJ45 ports (4 ports for SP1005; 8 ports for SP1009), all ports
support auto-negotiation, auto MDI/MDIX;
IEEE 802af/at active PoE standard, auto detect the power receiving device, plug and
play;
Support PoE+ and Port priority, max. PoE power up to 30W for each PoE port, total
96W;
Built in LED indicator to show the link and power status, visual and convenient;
Low power consumption, no-noise design, support full-duplex mode and half-duplex
mode
Metal case, desktop design, support wire-speed forwarding and MAC address,
auto-learning and auto-aging.
Device Structure
1-2 4-Port PoE Switch
1.2.1 Front Panel
The front panel is shown below:
Image 1: SP1005
Image 2: SP1009
SN
Name
Note
1
10/100/1000
BASE-TX
10/100/1000M self-adaptive PoE power supply and
RJ45 ports.
2
100/1000 Base-X
100/1000M self-adaptive up-link port.
3
100/1000 Base-X
100/1000M self-adaptive SFP fiber port.
4
ALM
Alarm status indicator
5
PWR
Power indicator
6
DC Input power
48V/2A
Halskestr. 1
40880 Ratingen
Germany
Tel.: +49 2102 428 0
www.tiptel.com
Triester Str. 14 / Haus 2 / 254
2351 Wiener Neudorf
Austria
Tel.: +43 2236 677 464-0
www.tiptel.at
Pumpwerkstr. 40
8105 Regensdorf
Suisse
Tel.: +41 44 843 13 13
www.tiptel-online.ch
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Tiptel SP1005 User manual

SP1005
Tiptel
Brand
Tiptel
Model
SP1005
Category
Fire protection
Type
User manual
This manual is also suitable for

Tiptel SP1005 is a 4-port PoE switch with IEEE 802af/at standard, which supports PoE+ and Port priority, with a maximum PoE power of 30W for each PoE port and a total of 96W. It features auto-detection of the power receiving device, plug-and-play connectivity, and visual LED indicators for link and power status. The switch supports 10/100/1000Mbps speeds, auto-negotiation, and auto MDI/MDIX, ensuring seamless integration with various devices.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents