Hanover HANGAZCN13X10-GRY User manual

You must read these instructions carefully before you start to assemble this pavillion.Please ensure that you find all parts

9820402-2

9820402-1

Aluminum Pavilion

Instruction manual

IMPORTANT

in the carton box in the correct type and quantity as mentioned in the list illustrated in every page accordingly.

Please carry out the steps in the order set out in these instructions.

Keep these instructions in a safe place for future reference.

size/cm:397Lx297Wx196/252H

size/inch:156Lx117Wx77/99H

polycarbonate panels.

Do not tighten the steps in the Aluminum Pavilion until completing on the assembly of the

This is a multi-part assembly, Allow at least 4 hours for assembly.

clear panels.

TOOLS & EQUIPMENT REQUIRED

Protective Equipment:

1.Helmet

2.Glove

3.Long Sleeve Cotton Overalls

4.Emergency Medicine Cabinet

5.Eye Shield

-2-

Installation Tool:

5.Electric screwdriver+5mm Hexagon

2.Spanner 10mm/(25/64) (Ratchet Wrench is better)

1.Triangle Stairs≈

9.Percussion bit(10mm)9.Percussion bit(10mm)(25/64)

3.Spanner 14mm/(35/64) (Install the expansion screw)

4.Hexagon wrench 5mm(13/64)inch

wrench (suggest)

6.Wooden Mallet

7.Marking Pen

10.Knife

11.Phillips screwdriver

4.9 Feet Height

(13/64)inch

2.Angle Square

3.Level Meter

(16.4Feet)

1.Tape Measure

Measurement Tools:

Hot items such as recently used grills, blowtorches etc.must not be stored in the Wall shed.

Keep children away from the assembly area.

!

SAFETY ADVICE

We strongly recommend the use of work gloves during assembly.

Do not attempt to assemble the Aluminum Pavilion in windy or wet conditions,

Do not touch overhead power cables with the aluminum profiles.

Always wear shoes and safety goggles when working with extruded aluminum.

The Aluminum Pavilion must be positioned and fixed on a flat level surface.

Do not lean against or push the Aluminum Pavilion during construction.

Do not position your Aluminum Pavilion in an area exposed to excessive wind.

Do not attempt to assemble this Aluminum Pavilion if you are tired ,have taken drugs or

alcohol or if you are prone to dizzy spells.

If using a step ladder or power tools ensure that you follow the manufactures safety advice.

Ensure there are no hidden pipes or cables in the ground before inserting the pegs.

Dispose of all plastic bags safely and keep them out of reach of children.

Note that the door is hinged on the right hand side and therefore opens to the right space needed.

GENERAL ADVICE

Selecting a site-choose a sunny level position away from overhanging trees.

If you are fixing your Aluminum Pavilion directly to a solid concrete foundation use the

pre drilled holes in the metal base supplied.

The component parts should be checked and laid out close at hand.

Keep all small parts(screws etc)in a bowl so they do not get lost.

Keep roof clear of snow and leaves.

with cold clean water.

Aluminum Pavilion needs cleaning, use a mild detergent solution and rinse

CARE & MAINTENANCE

When your

Do NOT use acetone, abrasive cleaners or other special detergents to clean the

clear panels.

9820402-2

9820402-1

PRODUCT SIZE

-3-

256cm / 100.8inch

397cm / 156inch

297cm / 117inch

196cm / 77inch

200cm / 78.7inch

252cm / 99.2inch

356cm / 140inch

Make sure to install at the right location

be caused from screws facing into month.

screws that might hurt your eyes, and avoid suffocation that may

5.Avoid looking up while working high up and avoid dropping

4. Wear long sleeve cotton overalls,gloves and helmet during

of them and pay high attention to electric safety.

7.If injuries occur, please take immediate action to

OTHER CAUTIONS

!

OTHER CAUTIONS

1. 4-5 people required, one is for measuring & taking marks to

ensure the installation dimension ,the second person is

responsible for the installation and the last one do as assistant

and assure the safety.

2. High-power electric tools are required, ensure the normal work

3. Be careful when using the kind of blunt tools, like hammer.

installation and wear safety glasses when using power tools .

6. No climbing, No standing on the tent to avoid falling down.

locate and use a first-aid kit. In case of emergency,

please go to the nearest emergency room.

/ 98"

/ 59"

/ 139.7"

/ 100"

/ 29.4"

/ 27.8"

/ 19.5"

/ 76.7"

/ 31.6"

/ 144"

PARTS LIST

SKELETON

SCREW

B1 1

B2 1

B5 4

B6 4

1497mm

B9 2

B10 16

B11 4

B12 4

SUMMARY STATEMENT FOR POLYCARBONATE PANEL

OTHER

P1L

P1R

P3L

P3R

x4

F1 64

F2 79

F3 12

F4 12

F5 40

B15 12

S6 128

S8 12

比例 25.400

比例

25.400

比例 25.400

比例

25.400

比例 25.400

比例

25.400

比例 25.400

比例

25.400

B13 8

P2

1 4

2 2

3660mm

3 2

1423mm

5 8

804mm

8L 4

8R 4

804mm

1950mm

6 4

11 8

706mm

748mm

9 8

495mm

10 8

12 2

2548mm

13 2

3548mm

CONNECT

B8 8

2497mm

B7 2

S9 58

M6(15/64)

M8(5/16)

T4.8(3/16)

T5(13/64)

/ 76.7"

1950mm

/ 104.7"

2660mm

/ 56"

/ 31.6"

Schematic diagram of connections

Schematic diagram of frames

-5-

B9

6

8L

8R

10

B11

B5

B8

1

2

B2

B1

B3

B9

6

5

B8

2

12

B6

6

B13

1

B12

B15

1

2

3

5

8L

8R

6

7

9

10

11

12

13

B1

B2

B5

B6

B7

B8

B9

B10

B11

B12

"hexagonal screw" installation

Place the "hexagonal screw"into the groove,turn clockwise

until it stops turning.

Adjust the "hexagonal screw"by hand and twist so threads fix

it in place.

Place other parts on "screw"and assemble nut .

SUMMARY STATEMENT FOR POLYCARBONATE PANEL

UV

-6-

Face the white film side of panels towards the sun as they are UV-protected.

-7-

x4

Ⅰ

x4

Ⅱ

F2 x28

1 x4

B5 x4

B12 x4

F2

B5

1

F2

Ⅲ

x4

B12

F2

1

Ⅳ

12 x2

B13 x4

-8-

F5 x 8

S6 x56

2

12

F5

B13

x2

Ⅰ

x4

Ⅱ

S6 x14

12

B13

F5

12

F5

B13

2

Ⅰ

Ⅱ

F5x4

12

2

2 x2

Ⅲ

x2

2

Ⅲ

Fabric Hook S6 and Hook Stopper B13 preinstallation

13 x2

B13 x4

-9-

F5 x 12

S6 x72

x2

Ⅰ

x4

Ⅱ

S6 x18

13

B13

F5

13

F5

B13

3

F5x6

13

3

3 x2

Ⅲ

x2

3

13

F5

B13

Ⅰ

Ⅲ

Ⅱ

No.3# Beam assembly

1.Tighten all screws

2.Fabric hook and hook stopper is preinstalled

here.It's much convenient for users to install

sunshade or mosquito nets afterwards.

B8 x8

F2 x32

x2

Ⅰ

B8

3

1

B5

B8

3

x2

Ⅱ

F2

B8

x4

Ⅰ

B8

F2

3

x2

Ⅱ

1

B8

Ⅲ

x2

Ⅲ

x2

Ⅱ

Ⅲ

x2

B5

F2

3

1

-10-

Connection among columns,

beams and studdles.

F2 x8

Ⅱ

x2

Ⅰ

Ⅱ

F2

B5

2

F2

1

B8

B5

-11-

3

Make sure the columns are vertical

to the ground,and beams are horizotal.

F2 x8

F1 x8

B6 x4

1

B8

F2

x4

Ⅰ

B6

x4

Ⅱ

2

3

1

B6

-12-

F1

Tighten all screws by diagonals.

Connection Strap Installation

!

B1

F1 x12

F1

B1

-13-

F1

Preparation: Reserve F1 Screws before installing the roof.

Do not tighten F1.

Skeleton Assembly.

5 x8

6 x4

F4 x12

6

B1

F4

F1

6

F4

B1

F4 and F1 need tighten

!

x4

Ⅰ

x8

Ⅱ

F4

5

B1

-14-

9 x4

9

5

6

F1 x24

B9 x2

Ⅰ

x4

F1

6

F1

5

B9

x8

5

B9

F1

761mm±3

!

5

B9

F1

B9

6

B9

x4

F1

F1 need tighten

!

-15-

B7 x2

6

5

B9

B7

B9

F1

!

x2

Ⅱ

Ⅲ

x2

F1

B7

Ⅳ

761mm 761mm

761mm761mm

Ⅴ

30inch

30inch±0.1

Roof stators installation

Do not tighten F1.

-16-

B2

F2 x3

F2

B2

Roof cap installation

Tighten all screws.

Team Work Required (2 or 3 persons)

!

180°

-17-

Roof Installation

5±0.1inch

-18-

F1 x12

Ⅰ

x8

5

F1

x4

Ⅱ

F1

6

B6

126±3mm

5

B5

F1 need tighten

!

6

154±3mm

F1 need tighten

!

5

F1

6

F1

6.06±0.1inch

Make sure the measurements

below are in tolerances.

8L / 8R Studdles Installation

-19-

8L x4

8R x4

F1 x8

Ⅰ

x4

2

12

F1

!

8L

12

2

12

8R

x4

Ⅱ

2

8L

8R

F1

B7

B9

Ⅲ

x4

F1 need tighten

!

8L

8R

6

B7

B9

8L

8R

B9

B7

Ⅰ

Do not tighten F1.

!

-20-

P1L

P1R

x4

P3R

x4

P3L

x4

P2

PC Panels

Installation

Face the UV surface of the panels towards the sun

Page is loading ...

Hanover HANGAZCN13X10-GRY User manual

This manual is also suitable for

Hanover HANGAZCN13X10-GRY User manual

Related papers

Other documents