Posiflex IO-200 User manual

Brand: Posiflex

Model: IO-200

Type: User manual

Package Contents

 IO-200 I/O Box………………...(1)

 Mounting Screw (φ4-16L)…...(4)

 Plastic Anchor…………….……(4)

 User Manual...………................(1)

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions manual, may cause

interference to radio communications. It has been tested and found to comply

with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC

Rules, which are designed to provide reasonable protection against

interference when operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference in which case the

user at his own expense will be required to take whatever measures to correct

the interference.

This is a class A product. In a domestic environment this

product may cause radio interference in which case the user

may be required to take adequate measures.

IO-200

I/O Box

Installation Guide

16940904010 Ver. A0

http://www.posiflex.com

Views of the IO-200

Top View

Front View (Connect to Peripherals)

Rear View (Connect to POS Terminal)

Mounting Screw Hole

USB 3.0 Ports

DC IN

DP OUT

VGA OUT

24V Powered USB Port

12V Powered USB Port

LAN Port

DB9 COM Port

CR Port

DB9 COM Port

USB3.0-IN

(with screw lock)

DP-IN

VGA-IN

DC OUT

Mounting under a Table

IO-200 is designed to be mounted under a table. Please follow the instruction

below.

Put IO-200 system under the table, then

screw in the mounting holes. Same on the

other side.

Installing Drivers

Before using the I/O box, download first the USB-to-COM, USB-to-LAN, and

virtual COM drivers.

Please visit Posiflex official website (http://www.posiflex.com/en-

global/Download/download) to download the drivers.

Then, follow the step-by-step instructive messages to complete the driver

installation. After completion of the driver installation, restart your POS

terminal.

Setting the Commands for CR Port (Cash Drawer) of I/O Box

CMD 1 : Open CR1：0x07

CMD 2 : Open CR2：0x17

CMD 3：Read CR1 Status (Open or Close)：0xC1 Feedback：’O’ or ’C’

CMD 4：Read CR2 Status (Open or Close)：0xC2 Feedback：’O’ or ’C’

Table

Specifications

Front I/O ports

DP x 1

VGA x 1

Giga LAN x 1

USB3.0 x 6

CR port x 1

RS-232 DB-9 serial port x 3

12V powered USB port x 1

24V powered USB port x 1

DC Jack(4-pin, 12V power input) x 1

Rear I/O ports

DP x 1

VGA x 1

USB3.0(with screw lock) x 1

DC jack(4-pin, 12V power output) x 1

Power source

12V/150W

Dimensions

243 x 80 x 45 mm

Weight

715g

Operating condition

0°C - 40°C, 20%RH - 90%RH

Storage condition

-20°C - 70°C, 10%RH - 90%RH

Regulatory

FCC/CE

Accessories

(Optional)

USB 3.0 cable x 1

DP cable x 1

VGA cable x 1

DC power cable x 1

※

The product information and specifications are subject to change

without prior notice. To get the detailed information on IO-200, please

check this model from Posiflex Global Website

(http://www.posiflex.com/en-global/Download/download).

Posiflex IO-200 User manual

Posiflex IO-200 User manual

Posiflex IO-200 User manual

Related papers

Other documents