Symmons SRT-4270 Installation guide

Brand: Symmons

Model: SRT-4270

Category: Faucets

Type: Installation guide

This manual is also suitable for

Symmons SRT-4270-ORB is a Roman Tub Faucet with a variety of features that can enhance your bathroom experience. The faucet is made of durable materials and has a stylish design that will complement any bathroom décor. The faucet is easy to install and use, and it comes with a variety of accessories that make it a great value.

Some of the key features of the Symmons SRT-4270-ORB Roman Tub Faucet include:

Durable construction: The faucet is made of solid brass and has a corrosion-resistant finish, ensuring that it will last for years to come.
Stylish design: The faucet has a classic design that will complement any bathroom décor.

Some of the key features of the Symmons SRT-4270-ORB Roman Tub Faucet include:

Durable construction: The faucet is made of solid brass and has a corrosion-resistant finish, ensuring that it will last for years to come.
Stylish design: The faucet has a classic design that will complement any bathroom décor.

1 2 3 4

1/8"

3/32"

Step 1

Cut copper

tubing to length Hot

Supply Cold

Supply

Step 6

Solder supply lines

and check for leaks

Step 2

Solder valve

assembly together

Step 4

Attach supply valves

to deck

Step 5

Attach handles

Step 3

Attach spout

centerbody to deck

Step 7

Attach spout

Step 8

Flush supply lines

and check for leaks

Quick Install Guide Oxford Roman Tub Faucet, SRT-4270

WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects,

or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Roman Tub Faucet SRT-4270

Installation and Service Instructions

Oxford®

Tools & Materials  Need Help?

Symmons customer service:

Phone: (800) 796-6667

Email: [email protected]

Monday - Friday 7:30 am - 6:00 pm EST

www.symmons.com/service



Finish Options

-STN Satin Nickel

-ORB Oil Rubbed Bronze

- Chrome (standard nish)

Model Numbers

SRT-4270 Roman Tub Faucet

Compliance

ASME A112.18.1/CSA B125.1

Step 1 Cut copper tubing to length

Step 2 Solder valve assembly together

Step 3 Attach spout centerbody to deck

Step 4 Attach supply valves to deck

Step 5 Attach handles

Length = (d) minus 2-1/4 inches (57 mm) divided by 2.

Example:

If center to center distance (d) is 14 inches.

14 inches minus 2-1/4 inches = 11-3/4 inches.

11-3/4 inches divided by 2 = 5-7/8 inches.

Cut 2 copper tubes into 5-7/8 inch lengths.

* Maximum distance (d) with supplied

copper tubing is 18-1/4 inches (463 mm)

center to center distance (d)*

1/2" (12.7 mm) copper tubing

Ensure valves are

parallel aligned

when soldering.

nished deck

front view

Screw down until

thread stops

nished deck

front view

nished deck

front view

3/32" Allen

wrench

OFF

Position

OFF (CW)

OFF (CCW)

Installation Instructions

Page 2

Care of faucet ﬁnish

Clean nish area by using mild soap and water or non-

abrasive cleaner and then rinse immediately. A non-

abrasive wax may be used to preserve nish area.

Valve cartridge replacement

Step 6 Solder supply lines to valve inlets

and check for any leaks

Step 7 Attach spout

Step 8 Flush supply lines; check for leaks

3/32" Allan

wrench

3/32" Allen

wrench

OFF position

OFF = CW

OFF = CCW

Attaching handles

Replace appropriate hot

and cold cartridge as

referenced in Replace-

ment Parts table.

Use a 17mm deep

socket or wrench.

nished deck

front view

hot cold

Page 3

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184

Phone: (800) 796-6667 ■ Fax: (800) 961-9621

Website: symmons.com ■ Email: [email protected]

Note: Dimensions subject to change without notice.

5-3/8"

(138 mm) 3-1/4"

(83 mm)

7-3/4"

(196 mm)

(102 mm)

5-7/8"

(150 mm)

7-1/8"

(182 mm)

9-3/8"

(239 mm)

2-1/8" (53 mm) square

2-1/2" (64 mm)

square

2-3/4"

(70 mm)

Hole size

1-1/8" (29 mm) min

1-3/8" (35 mm) max

Deck thickness

1-3/8" (35 mm) max

18-1/4"(464 mm) max

with supplied copper tubing

Dimensions Oxford Roman Tub Faucet, SRT-4270

handle kit

Part Number Item

Replacement Parts

handle

screw

collar

fastener

gasket

KN-113E

identiﬁed

by groove

KN-114E (hot)

OFF = CW

KN-113E (cold)

OFF = CCW

valve cartridge

LN-333-KIT

aerator (2.2 gpm)

removal key

RT-422-KIT *

includes two handle

assemblies

spout

RT-253*

aerator

handle

3/32"

allen screw

collar/

escutcheon

cartridge

fastener

washer

ange nut

supply valve

pipe plug

retaining plate

ange nut

centerbody

1/4"-20 x 1/2"

allen set screw

hole plug

Ordering replacement parts:

Call Symmons customer service at (800) 796-6667,

(781) 848-2250 M-F 7:30 am - 6:00 pm EST or

check our website at www.symmons.com for a

list of Symmons distributors.

Note: For faucets with an optional decorative nish,

add appropriate sufx code letters to part numbers

marked with an asterisk (*) when ordering.

Ref.

parts

table

Parts Assembly Oxford Roman Tub Faucet, SRT-4270

Symmons SRT-4270 Installation guide

Brand: Symmons

Model: SRT-4270

Category: Faucets

Type: Installation guide

This manual is also suitable for

Some of the key features of the Symmons SRT-4270-ORB Roman Tub Faucet include:

Durable construction: The faucet is made of solid brass and has a corrosion-resistant finish, ensuring that it will last for years to come.
Stylish design: The faucet has a classic design that will complement any bathroom décor.

Download PDF

report

Symmons SRT-4270 Installation guide

This manual is also suitable for

Symmons SRT-4270 Installation guide

Related papers

Other documents