2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Faucets
  6. Symmons
  7. SRT-0600-70-TRM

Symmons SRT-0600-70-TRM Installation guide

  • Hello! I'm a chat assistant and I've reviewed the installation guide for the Symmons DS Creations Two Handle Roman Tub Faucet, which includes models SRT-0600-70-TRM and SRT-0600-70-BODY. This document covers the product's specifications, dimensions, parts breakdown, and installation steps. I'm ready to answer any questions you have about this product.
  • What is the warranty on this product for residential use?
    What is the warranty on this product for industrial or commercial use?
    What tools are needed for installation?
DS Creations
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
SRT-0600-70-TRM (CDSRT0600-70-TRM)
Two Handle Roman Tub Faucet
Installation Guide
SRT-0600-70-TRM
Two Handle Roman Tub Faucet
SRT-0600-70-BODY
Roman Tub Valve Body Assembly
Two Handle Roman Tub Faucet (with roman tub valve body
assembly) shall include quarter turn ceramic cartridges and
1/2" IPS inlet connections. Roman Tub Faucet shall be
made from metal construction, plated in standard polished
chrome nish.
Dimensions
Measurements
A (2x) 2-1/2", 64 mm
B Ø 2-1/4", 57 mm
C 4", 102 mm
D 8", 203 mm
E Ø 2-1/4", 57 mm
F 1-5/16", 33 mm
G 9-1/16", 230 mm
H 6-1/2", 165 mm
IDeck Thickness Ref.
Max. 3-1/2", 89 mm
JHole Size
Ø 1-3/8", 35 mm
K
(2x) Hole Size
Min. Ø 1-1/4", 32 mm
Max. Ø 1-1/2", 38 mm
L Ø 6-1/16", 154 mm
Note: Dimensions subject to change without notice.
JJ KK
AA
B
B
CC
E
E
H
HGG
L
L
I
I
FF
DD
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-2459 REV B ■ 050818
Parts Breakdown
Replacement Parts
Item Description Part Number
A
B
Hot Plug Button
Cold Plug Button RL-310
C Handle RL-311
D Aerator RT-262
E Handle Escutcheon RL-312
F Hot Cartridge KN-114
G Cold Cartridge KN-113
A
D
B
C
E
HOT
Water Supply
COLD
Water Supply
G
F
Notes:
1) Apply a bead of silicone around the perimeter
of trim installed ush to sink.
2) Apply plumber tape to all threaded connections.
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Spout (3 mm)
Phillips Head
Screwdriver
Plumber Tape
Safety Glasses
Silicone
Solder and Torch
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
/