Redring RSELP85WPC Selectronic Premier WPC 8.5kW Shower Product information

Hello! I have analyzed the provided wiring diagram for the Redring Selectronic electric shower. This document details the electrical connections, components such as the heat exchanger, TRIAC controls, and flow transducer, along with the necessary regulations for installation. I am ready to assist with any questions you may have about this document or the shower's wiring.
What electrical supply is the unit designed for?

What regulations should the electrical installation comply with?

What is recommended for disconnection of all poles in the fixed wiring?

SELECTRONIC WIRING DIAGRAM MARCH 2021

SELECTRONIC WIRING DIAGRAM

Redring (A brand of Glen Dimplex Heating & Ventilation), Millbrook House, Grange Drive, Hedge End, Southampton SO30 2DF www.redring.co.uk

The electrical installation must be in accordance with the current BS7671 (I.E.T. wiring regulations) and “Part P” of the

Building Regulations and/or local regulations. The unit is designed for a single phase 50Hz AC electrical supply.

Please check the rating plate on the unit to see what details apply to your unit. A means for disconnection of all poles

must be incorporated in the fixed wiring in accordance with the wiring regulations. We recommend ceiling pull switches.

The cable size required is determined by the kW rating of the shower and the distance between the shower and the

consumer unit and the installation conditions.

Electrical Connections