ASRock Rack OCP-C612HM Installation guide

ASRock Rack
Brand
ASRock Rack
Model
OCP-C612HM
Category
Motherboards
Type
Installation guide

ASRock Rack OCP-C612HM is an efficient solution for data centers and cloud computing environments requiring high performance and scalability. Designed with the latest Intel C612 chipset, it supports dual LGA 2011 sockets, providing a foundation for powerful computing capabilities. The server board accommodates up to 16 DDR4 DIMM slots, enabling substantial memory capacity for demanding workloads. Its flexible expansion options include a PCIe 3.0 x24 slot specifically designed for ASRock Rack OCP-RB, along with additional PCIe slots for customization. The OCP-C612HM features IPMI 2.

ASRock Rack OCP-C612HM is an efficient solution for data centers and cloud computing environments requiring high performance and scalability. Designed with the latest Intel C612 chipset, it supports dual LGA 2011 sockets, providing a foundation for powerful computing capabilities. The server board accommodates up to 16 DDR4 DIMM slots, enabling substantial memory capacity for demanding workloads. Its flexible expansion options include a PCIe 3.0 x24 slot specifically designed for ASRock Rack OCP-RB, along with additional PCIe slots for customization. The OCP-C612HM features IPMI 2.

OCP- C612H M
Quick Installation Guide
www.asrockrack.com
3
2
P/N: 15G065058100AK V1.0
Install the Server Board
Jumper Cap On/O
The server board User's Manual is available for download from the ASRock Rack's ofcial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
1
1Insert the server board into the chassis.
2Aff ix the screws clockwise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
When the jumper cap is placed on the pins, the jumper is
“Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.
e illustration shows a 3-pin jumper whose pin1 and pin2
are “Short” when a jumper cap is placed on these 2 pins.
System Panel Header
Auxiliary Panel Header
4Headers
16.5cm (6.5 in)
50.8cm (20in)
LAN1
PCIE1
CMOS
Battery
RoHS
OCP-C612HM
Intel
C612
DDR4_A1 (64 bit, 288-pin module, Blue)
DDR4_A2 (64 bit, 288-pin module, White)
DDR4_B1 (64 bit, 288-pin module, Blue)
DDR4_B2 (64 bit, 288-pin module, White)
DDR4_D2 (64 bit, 288-pin module, White)
DDR4_D1 (64 bit, 288-pin module, Blue)
DDR4_C2 (64 bit, 288-pin module, White)
DDR4_C1 (64 bit, 288-pin module, Blue)
BMC
ROM
17
18
19
29
30
BMC_SMB_1
1
PSU_SMB1
IPMB_1
HDL ED RESE T
PLE D PWRBT N
PANE L1
1
11
11
11
11
11
PSU_SMB_CLK 1_SEL
PMBUS SEL__DAT_ 1PMBUS_ALT#1_SEL
NCSII_SEL1
NMI_ BT N1
11
12
13
NUT1
NUT2NUT3NUT4
M2_1
1
TPM1
1
AUX_PANEL1
USB3_5
SATA_4
SATA_5
CPU_1
LAN2
MEZZ_1
11
11
11
PECI_SEL1
SATA_PWR2
ME_RECOVERY1 J100 DEBUG_1
SSATA_0_3
SATA_0_3
PCIE_PWR1
1
VGA1
1
IPMI_LAN_1
USB3_1
DEBUG1
RESET_BTN_1 PWR_BTN_1
BIOS
A
BIOS
B
TPM2
11
SPEAKER1
1
SATA_PWR1
12345 7
10
14
15
16
31
32
33
34
35
36
37
38
42
43
48
44
45
46
47
49
50
DDR4_G1 (64 bit, 288-pin module, Blue)
DDR4_G2 (64 bit, 288-pin module, White)
DDR4_H1 (64 bit, 288-pin module, Blue)
DDR4_H2 (64 bit, 288-pin module, White)
DDR4_F2 (64 bit, 288-pin module, White)
DDR4_F1 (64 bit, 288-pin module, Blue)
DDR4_E2 (64 bit, 288-pin module, White)
DDR4_E1 (64 bit, 288-pin module, Blue)
CPU_2
SIDEBAND1
SYSTEM_FAN1
CON_2
SYSTEM_FAN2
21
22
24
25
23
26
27
28
8
9
20
6
1
CHASSIS_ID2
11
CHASSIS_ID1
CHASSIS_ID0
39
40
41
No. Description
1 Debug Connector (DEBUG1)
2Intelligent Platform Management Bus header
(IPMB1)
3 Mezzanine Card Slot (MEZZ_1)
4 Descriptor Security Override Jumper (J100)
5 Debug Header (DEBUG_1)
6 IPMI LAN Header (IPMI_LAN_1)
7VGA Header (VGA1)
8 M.2 Slot (M2_1)
9PCI Express 3.0 x24 Slot (PCIE1) (supports
ASRock Rack OCP-RB only)
10 PSU SMBus (PSU_SMB1)
11 PMBus Mode Jumper (PMBUS_DAT_SEL1)
12 PMBus Mode Jumper (PMBUS_ALT_SEL1)
13 PMBus Mode Jumper (PMBUS_CLK_SEL1)
14 SATA Power Header (SATA_PWR2)
15 SATA3 Connector (SATA_4)
16 PCIE Card Power Connector (PCIE_PWR1)
17 LGA 2011 CPU Socket R3 (Narrow ILM)
(CPU_1)
18 2 x 288-pin DDR4 DIMM Slots (DDR4_C1,
DDR4_D1, Blue)
19 2 x 288-pin DDR4 DIMM Slots (DDR4_C2,
DDR4_D2, White)
20 LGA 2011 CPU Socket R3 (Narrow ILM)
(CPU_2)
21 2 x 288-pin DDR4 DIMM Slots (DDR4_E1,
DDR4_F1, Blue)
22 2 x 288-pin DDR4 DIMM Slots (DDR4_E2,
DDR4_F2, White)
23 Sideband Connector (SIDEBAND1)
24 Midplane Board Connector (CON_3)
No. Description
25 System Fan Connector (SYSTEM_FAN1)
26 System Fan Connector (SYSTEM_FAN2)
27 2 x 288-pin DDR4 DIMM Slots
(DDR4_H2, DDR4_G2, White)
28 2 x 288-pin DDR4 DIMM Slots
(DDR4_H1, DDR4_G1, Blue)
29 2 x 288-pin DDR4 DIMM Slots
(DDR4_A2, DDR4_B2, Blue)
30 2 x 288-pin DDR4 DIMM Slots
(DDR4_A1, DDR4_B1, White)
31 SATA3 Connector (SATA_5)
32 Vertical Type A USB 3.0 (USB3_5)
33 SATA Power Connector (SATA_PWR1)
34 CPU PECI Mode Jumper (PECI_SEL1)
35 Mini-SAS Connector (SATA_0_3)
36 Mini-SAS Connector (SSATA_0_3)
37 Non Maskable Interrupt Button (NMI_
BT N1)
38 Chassis ID0 Jumper (CHASSIS_ID2)
39 Chassis ID1 Jumper (CHASSIS_ID1)
40 Chassis ID2 Jumper (CHASSIS_ID0)
41 System Panel Header (PANEL1)
42 Auxiliary Panel Header (AUX_PANEL1)
43 Speaker Header (SPEAKER1)
44 TPM Connector (TPM2)
45 ME Recovery Jumper (ME_RECOVERY1)
46 TPM Header (TPM1)
47 NCSI Mode Jumper (NCSI_SEL1)
48 BMC SMBus Header (BMC_SMB_1)
49 Power Switch (PWR_PWR_1)
50 Reset Switch (RESET_BTN_1)
GNDRESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
GND
SMB_CLK
SMB_Alert
CASEOPEN
1
SMB_DATA
+3VSB
LAN1_LINK
LED_PWR
LAN2_LINK
LED_PWR
+5VSB
GND
GND
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#
System Fault LED-
AB
CD
System Fault LED+
E
*15G065058100AK*
Motherboard Layout
OCP - C612 HM
Quick Installation Guide
www.asrockrack.com
Recommended Memory Congurations
5
7
6
123
Open the socket levers and the
CPU socket cover.
Install the processor and close
the socket cover.
Close the socket levers. Remove
the CPU protection cap.
Install the CPU Fan and Heatsink
12
Apply the thermal grease. Install the
CPU fan and heatsink and secure
the screws.
Connect the CPU fan to the CPU
FAN connector.
Install the Memory
123
Unlock a DIMM slot by
pressing the module clip
outward.
Insert the memory module. Lock the clip.
9Install the PCIE Card
1Remove the bracket facing the slot that
you intend to use. Keep the screw for
later use.
2Align the card connector with the
slot and press firmly until the card is
completely seated on the slot.
Fasten the card to the chassis with the
screw.
3
11
Install the Processor
CPU_FAN
A
B
A
B
A
B
A
B
B
A
M.2_SSD (NGFF) Module Installation
12
8I/O Panel
3
1
2
No. Description No. Description
1 LAN RJ-45 Port (LAN1) 2 LAN RJ-45 Port (LAN2)
3 USB 3.0 Port (USB3_1)
Speed LED Activity / Link LED
Status Description Status Description
O 10Mbps connection or
no link
O No Link
Yellow 100Mbps connection Blinking Green Data Activity
Green 1Gbps connection On Link
10 LAN Port LED Indications
ACT/LINK LED
SPEED LED
LAN Port
LAN Port
1 CPU Conguration
CPU1
A1 A2 B1 B2 C1 C2 D1 D2
1 DIMM #
2 DIMMS #
4 DIMMS ####
8 DIMMS ########
2 CPU Conguration
CPU1
A1 A2 B1 B2 C1 C2 D1 D2
1 DIMM #
2 DIMMS #
4 DIMMS # #
8 DIMMS # # # #
12 DIMMS ########
16 DIMMS ########
CPU2
E1 E2 F1 F2 G1 G2 H1 H2
1 DIMM
2 DIMMS #
4 DIMMS # #
8 DIMMS # # # #
12 DIMMS # # # #
16 DIMMS ########
CPU fan for narrow ILM socket
*Support an active or passive heatsink
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
1
2
3
Find the corresponding nut location to be used.
Move the stando based on the module type and
length.
Peel o the yellow protective lm on the nut. Hand
tighten the stando into the desired location.
No. 1 2 3 4
Nut Location A B C D
PCB Length 3cm 4.2cm 6cm 8cm
Module Type Type
2230
Type
2242
Type
2260
Type
2280
Align and gently insert the M.2 module into the
slot.
Tighten the screw with a screwdriver to secure
the module into place. Please do not overtighten
the screw.
3
2
4
BCD A
1
BCD A
BCD A
A
BCD
NUT1NUT2D
4
5
  • Page 1 1
  • Page 2 2

ASRock Rack OCP-C612HM Installation guide

ASRock Rack
Brand
ASRock Rack
Model
OCP-C612HM
Category
Motherboards
Type
Installation guide

ASRock Rack OCP-C612HM is an efficient solution for data centers and cloud computing environments requiring high performance and scalability. Designed with the latest Intel C612 chipset, it supports dual LGA 2011 sockets, providing a foundation for powerful computing capabilities. The server board accommodates up to 16 DDR4 DIMM slots, enabling substantial memory capacity for demanding workloads. Its flexible expansion options include a PCIe 3.0 x24 slot specifically designed for ASRock Rack OCP-RB, along with additional PCIe slots for customization. The OCP-C612HM features IPMI 2.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents