ASRock Rack EP2C612D24-4L Installation guide
- Type
- Installation guide
EP2C612D24 / E P2C612D24- 4L
Quick Installation Guide
www.asrockrack.com
4
2
P/N: 15G065047100AK V1.0
Install the Server Board
Motherboard Layout
Headers
The server board User's Manual is available for download from the ASRock Rack's ofcial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
1
1Insert the server board into the chassis.
2Affix the screws clockwise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
When the jumper cap is placed on the pins, the jumper is “Short”.
If no jumper cap is placed on the pins, the jumper is “Open”.
The illustration shows a 3-pin jumper whose pin1 and pin2 are
“Short” when a jumper cap is placed on these 2 pins.
I/O Panel
ATXPWR1
VGA1
COM1
1
PSU_SMB1
Intel
C612
1
FRNT_FAN2FRNT_FAN1
USB 3.0
T: USB1
B: USB2
DDR4_H3 (64 bit, 288-pin module,)White
DDR4_H2 (64 bit, 288-pin module, White)
DDR4_H1 (64 bit, 288-pin module,)Blue
DDR4_G3 (64 bit, 288-pin module, White)
1
1
HDLED RESET
PLED PWRBTN
PANEL1
1
1
11
USB3_5
PCIE2
PCIE3
PCIE1
SATA_2
SATA_3
BAT1
1
1
FRNT_FAN3
IPMB1
(Blue)
SPEAKER1
1
1
1
1
USB3_3_4
1
1
TPM1
BMC_SMB_2
BMC_SMB_1 BMC_SMB_3
NMI_BTN1
PECI1
CHASSIS_ID1
CHASSIS_ID2
PMBUS_SEL_ALT1
PMBUS_SEL_CLK1
CPU2_FAN1
CPU1_FAN1
REAR_FAN1
33.0cm (13.0 in)
BIOS
64Mb
PMBUS_SEL_DAT1
CHASSIS_ID3
Dr.
Debug
USB 2.0
T: USB1
B: USB2
IPMI
LAN
(Blue)
(Blue)
FRNT_FAN5
SSATA_0
SSATA_1
SSATA_2
SSATA_3
SATA_0
SATA_1
SATA_4
SATA_5
1
1
ME_RECOVERY1
T 1
323334353637383940424344454647484950
54
55
1
1
SATA_SGPIO1
SATA_SGPIO2
AUX_PANEL1
1
1
1
SSATA_SGPIO1
30.5cm (12.0 in)
1
22
23
28
27
24
25
26
UID1
R
ATX12V2AT X12V1
USB_3_4
1
56
DDR4_G2 (64 bit, 288-pin module,)White
DDR4_G1 (64 bit, 288-pin module, Blue)
DDR4_B3 (64 bit, 288-pin module,)White
DDR4_B2 (64 bit, 288-pin module, White)
DDR4_B1 (64 bit, 288-pin module,)Blue
DDR4_A3 (64 bit, 288-pin module, White)
DDR4_A2 (64 bit, 288-pin module,)White
DDR4_A1 (64 bit, 288-pin module, Blue)
DDR4_E1 (64 bit, 288-pin module,)Blue
DDR4_E2 (64 bit, 288-pin module, White)
DDR4_E3 (64 bit, 288-pin module,)White
DDR4_F1 (64 bit, 288-pin module, Blue)
DDR4_F2 (64 bit, 288-pin module,)White
DDR4_F3 (64 bit, 288-pin module, White)
DDR4_C1 (64 bit, 288-pin module,)Blue
DDR4_C2 (64 bit, 288-pin module, White)
DDR4_C3 (64 bit, 288-pin module,)White
DDR4_D1 (64 bit, 288-pin module, Blue)
DDR4_D2 (64 bit, 288-pin module,)White
DDR4_D3 (64 bit, 288-pin module, White)
LAN1 LAN2
LAN3 LAN4
FRNT_FAN4
11
LED_LAN3_4
BUZZER1
BMC
F/W
NUT1
NUT2NUT3NUT4
M2
Super
I/O
RoHS
CPU2
CPU1
EP2C612D24-4L
12345678
9
10
11
12
13
14
15
16
17
19
20
21
29
30
31
41515253
57
58
59
60
61
18
62
No. Description
1 2 x 288-pin DDR4 DIMM Slots (DDR4_H3, DDR4_G3, White)
2 2 x 288-pin DDR4 DIMM Slots (DDR4_H2, DDR4_G2, White)
3 2 x 288-pin DDR4 DIMM Slots (DDR4_H1, DDR4_G1, Blue)
4 ATX 12V Power Connector (ATX12V2)
5 Intelligent Platform Management Bus header (IPMB1)
6 ATX Power Connector (ATXPWR1)
7 ATX 12V Power Connector (ATX12V1)
8PSU SMBus (PSU_SMB1)
9 Front Fan Connector (FRNT_FAN1)
10 Front Fan Connector (FRNT_FAN2)
11 PMBUS Mode Jumper (PMBUS_SEL_ALT1)
12 PMBUS Mode Jumper (PMBUS_SEL_DAT1)
13 PMBUS Mode Jumper (PMBUS_SEL_CLK1)
14 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1, Blue)
15 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2, White)
16 2 x 288-pin DDR4 DIMM Slots (DDR4_A3, DDR4_B3, White)
17 CPU 1 Fan Connector (CPU1_FAN1)
18 LGA 2011 R3 CPU Socket 1 (CPU1)
19 2 x 288-pin DDR4 DIMM Slots (DDR4_C3, DDR4_D3, White)
20 2 x 288-pin DDR4 DIMM Slots (DDR4_C2, DDR4_D2, White)
21 2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_D1, Blue)
22 Front Fan Connector (FRNT_FAN4)
23 Front Fan Connector (FRNT_FAN3)
24 Front Fan Connector (FRNT_FAN5)
25 Lan LED Connector (LED_LAN34) *For EP2C612D24-4L only
26 System Panel Header (PANEL1)
27 Auxiliary Panel Header (AUX_PANEL1)
28 SSATA SGPIO Connector (SSATA_SGPIO1)
29 Non Maskable Interrupt Button (NMI_BTN1)
30 SATA SGPIO Connector (SATA_SGPIO2)
31 SATA SGPIO Connector (SATA_SGPIO1)
32 SATA3 Connector (SATA_0)
33 SATA3 Connector (SATA_2)
34 SATA3 Connector (SATA_3)
35 SATA3 Connector (SATA_1)
36 SSATA3 Connector (SSATA_0)
37 SSATA3 Connector (SSATA_1)
38 SATA3 Connector (SATA_5)
39 SSATA3 Connector (SSATA_3)
40 SSATA3 Connector (SSATA_2)
41 SATA3 Connector (SATA_4)
42 TPM Header (TPM1)
43 ME Recovery Jumper (ME_RECOVERY1)
44 ermal Sensor Header (TR1)
45 Vertical Type A USB 3.0 (USB3_5)
46 Buzzer (BUZZER1)
47 USB 3.0 Header (USB3_3_4)
48 Speaker Header (SPEAKER1)
49 CPU PECI Mode Jumper (PECI1)
50 Chassis ID3 Jumper (CHASSIS_ID3)
51 BMC SMBus Header (BMC_SMB_3)
52 BMC SMBus Header (BMC_SMB_2)
53 BMC SMBus Header (BMC_SMB_1)
54 Chassis ID2 Jumper (CHASSIS_ID2)
55 Chassis ID1 Jumper (CHASSIS_ID1)
56 USB 2.0 Header (USB_3_4)
57 2 x 288-pin DDR4 DIMM Slots (DDR4_E1, DDR4_F1, Blue)
58 2 x 288-pin DDR4 DIMM Slots (DDR4_E2, DDR4_F2, White)
59 2 x 288-pin DDR4 DIMM Slots (DDR4_E3, DDR4_F3, White)
60 CPU 2 Fan Connector (CPU2_FAN1)
61 Rear Fan Connector (REAR_FAN1)
62 LGA 2011 R3 CPU Socket 2 (CPU2)
8
6
3
2
4
1
5
10
79
No. Description No. Description
1 Serial Port (COM1) 6 LAN RJ-45 Port (LAN1)
2VGA Port (VGA1) 7 LAN RJ-45 Port (LAN2)
3 USB 2.0 Ports (USB_1_2) 8 LAN RJ-45 Port (LAN3)*
4 USB 3.0 Ports (USB3_1_2) 9 LAN RJ-45 Port (LAN4)*
5 LAN RJ-45 Port (IPMI_LAN) 10 UID Switch (UID)
*For EP2C612D24-4L only
System Panel Header Auxiliary Panel Header
5Jumper Cap On/O
GND
RESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
GND
SMB_CLK
SMB_Alert
CASEOPEN
1
SMB_DATA
+3VSB
LAN1_LINK
LED_PWR
LAN2_LINK
LED_PWR
+5VSB
GND
GND
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#
System Fault LED-
AB
CD
System Fault LED+
E
*15G065047100AK*
3
EP2C612D24 / EP2C612D24 - 4L
Quick Installation Guide
www.asrockrack.com
Speed LED Activity / Link LED
Status Description Status Description
O 10Mbps connection or
no link
O No Link
Yellow 100Mbps connection Blinking Green Data Activity
Green 1Gbps connection On Link
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10M bps connection or no
link
Blinking Yellow Data Activity Yellow 100M bps connection
On Link Green 1Gbps connection
9LAN Port LED Indications
Dr. Debug
Code Description
00 Please check if the CPU is installed correctly and then clear CMOS.
0d Problem related to memory, VGA card or other devices. Please clear CMOS, re-install the memo-
ry and VGA card, and remove other USB, PCI devices.
01 - 54
(except 0d),
5A- 60
Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the
problem still exists, please install only one memory module or try using other memory modules.
55 e Memory could not be detected. Please re-install the memory and CPU. If the problem still
exists, please install only one memory module or try using other memory modules.
61 - 91 Chipset initialization error. Please press reset or clear CMOS.
92 - 99 Problem related to PCI-E devices. Please re-install PCI-E devices or try installing them in other
slots. If the problem still exists, please remove all PCI-E devices or try using another VGA card.
A0 - A7 Problem related to IDE or SATA devices. Please re-install IDE and SATA devices. If the problem
still exists, please clear CMOS and try removing all SATA devices.
b0 Problem related to memory. Please re-install the CPU and memory. If the problem still exists,
please install only one memory module or try using other memory modules.
b4 Problem related to USB devices. Please try removing all USB devices.
b7 Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the
problem still exists, please install only one memory module or try using other memory modules.
d6 e VGA could not be recognized. Please clear CMOS and try re-installing the VGA card. If the
problem still exists, please try installing the VGA card in other slots or use other VGA cards.
d7 e Keyboard and mouse could not be recognized. Please try re-installing the keyboard and
mouse.
d8 Invalid Password.
FF Please check if the CPU is installed correctly and then clear CMOS.
ACT/LINK LED
SPEED LED
LAN Port
6
8
10
7
123
Open the socket levers and the
CPU socket cover.
Install the processor and close
the socket cover.
Close the socket levers. Remove
the CPU protection cap.
Install the CPU Fan and Heatsink
12
Apply the thermal grease. Install the
CPU fan and heatsink and secure
the screws.
Connect the CPU fan to the CPU
FAN connector.
Install the Memory
Install the Power Cables
123
Unlock a DIMM slot by
pressing the module clip
outward.
Insert the memory module. Lock the clip.
11 Install the PCIE Card
1Remove the bracket facing the slot that you intend to use.
Keep the screw for later use.
2Align the card connector with the slot and press firmly
until the card is completely seated on the slot.
Fasten the card to the chassis with the screw.
3
IPMI LAN Port
LAN Port
12
Install the Processor
ACT/LINK LED
SPEED LED
LAN Port
CPU_FAN
A
B
A
B
A
B
A
B
B
A
1
3V
3V
GND
GND
5V
5V
GND
PWROK_PS
5VSB
12V
12V
3V
3V
-12V
GND
PSON#
GND
GND
GND
5V
5V
5V
GND
N/A
12
24 13
4
8
1
5
+12V2
GND
1 CPU Congurations
DIMM(S)
1 2 4 8 12
CPU1
A1 # # # # #
A2 # #
A3 #
B1 # # # #
B2 # #
B3 #
C1 ###
C2 # #
C3 #
D1 # # #
D2 # #
D3 #
2 CPU Congurations
DIMM(S)
1 2 4 8 12 16 16 20 24
CPU1
A1 # # # # # # # # #
A2 # # # # #
A3 # # #
B1 # # # # # # # #
B2 # # # # #
B3 # # #
C1 # # # # # # #
C2 # # # # #
C3 # # #
D1 # # # # # # #
D2 # # # # #
D3 # # #
CPU2
E1 # # # # # #
E2 # # #
E3 #
F1 # # # # # #
F2 # # #
F3 #
G1 # # # # # #
G2 # # #
G3 #
H1 # # # # # #
H2 # # #
H3 #
Dr. Debug 13 Recommended Memory Congurations
CPU fan for narrow ILM socket
*Support an active or passive heatsink
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
-
1
-
2
ASRock Rack EP2C612D24-4L Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ASRock Rack EP2C612D24-4L User manual
-
ASRock Rack EP2C612D16SM Installation guide
-
-
-
-
-
-
-
-