ASRock Rack EP2C612D16FM Installation guide
- Type
- Installation guide
EP2C612D16FM / EP2C612D16FM-N
Quick Installation Guide
www.asrockrack.com
No. Description No. Description
1 USB 2.0 Ports (USB_1_2) 5 LAN RJ-45 Port (LAN1)
2 Serial Port (COM1) 6 LAN RJ-45 Port (LAN2)
3VGA Port (VGA1) 7 LAN RJ-45 Port (IPMI_LAN)
4 UID Switch (UID) 8 USB 3.0 Ports (USB3_1_2)
4
2
P/N: 15G065016100AK V1.0
Install the Server Board
Motherboard Layout
Jumper Cap On/O
The server board User's Manual is available for download from the ASRock Rack's ofcial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
1
1Insert the server board into the chassis.
2Affix the screws clockwise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
When the jumper cap is placed on the pins, the
jumper is “Short”. If no jumper cap is placed on the
pins, the jumper is “Open”.
The illustration shows a 3-pin jumper whose pin1
and pin2 are “Short” when a jumper cap is placed on
these 2 pins.
I/O Panel
26.7cm (10.5 in)
30.5cm (12.0 in)
ATXPWR1
12
1
VGA1
COM1
Top:
IPMI_LAN
USB 3.0
T: USB2
B: USB1
DDR4_H2 (64 bit, 288-pin module, White)
DDR4_H1 (64 bit, 288-pin module, Blue)
DDR4_G2 (64 bit, 288-pin module, White)
DDR4_G1 (64 bit, 288-pin module, Blue)
1
PSU_SMB1
1
EP2C612D16FM
Intel
C612
64Mb
BIOS
BMC
ROM
DDR4_E1 (64 bit, 288-pin module, Blue)
DDR4_E2 (64 bit, 288-pin module, White)
DDR4_F1 (64 bit, 288-pin module, Blue)
DDR4_F2 (64 bit, 288-pin module, White)
DDR4_A1 (64 bit, 288-pin module, Blue)
DDR4_A2 (64 bit, 288-pin module ), White
DDR4_B1 (64 bit, 288-pin module ), Blue
DDR4_B2 (64 bit, 288-pin module ), White
DDR4_D2 (64 bit, 288-pin module, White)
DDR4_D1 (64 bit, 288-pin module, Blue)
DDR4_C2 (64 bit, 288-pin module, White)
DDR4_C1 (64 bit, 288-pin module, Blue)
RoHS
LAN1
LAN2
CMOS
Battery
MEZZ_MB2
IPMB_1
BMC_SMB_1
1
1
ATX12V3
REAR_FAN1
REAR_FAN2
CPU2_FAN1
FRNT_FAN1
1
1
11
ATX12V2
AUX_PANEL1 PANEL1
SPEAKER1
TPM1
USB_3_4
CON30
CON31
CON28
CON29
34 5
6
7
8
10
11
13
16
18
19212223
24
25
26
27
29
30
31
35
37
38
39
40
UID
1
ME_RECOVERY1
20
USB3 TYPE A
28
32
33
9
12
1
SATA _SGPIO2
34
CPU2
CPU1
CPU1_FAN1
FRNT_FAN2
1
PECI1
1
USB3_3_4
1
USB 2.0
T: USB2
B: USB1
1
1
FRONT_LED_LAN34
SATA 0-3sSATA0-3
NMI_BTN1
SATA 4
SATA 5
M_SATA _0
M_SATA _1
Chassis ID1
Chassis ID0
14
15
17
36
46
41
42
43
44
45
Super
I/O
1
11
1
1
47
48
49
50
51
Chassis ID2
NCSI_SEL1
PMBUS_SEL_ALT1
PMBUS_SEL_CLK1
PMBUS_SEL_DAT1
No. Description
1Intelligent Platform Management Bus header
(IPMB_1)
2 ATX Power Connector (ATXPWR1)
3 Rear Fan Connector (REAR_FAN1)
42 x 288-pin DDR4 DIMM Slots (DDR4_H1, DDR4_
G1, Blue)
52 x 288-pin DDR4 DIMM Slots (DDR4_H2, DDR4_
G2, White)
6 Front Fan Connector (FRONT_FAN1)
7 CPU 2 Fan Connector (CPU2_FAN1)
8 PCIE Switch Board Connector (CON30) (CPU2)*
9 LGA 2011 CPU Socket (CPU2)
10 PCIE Switch Board Connector (CON31) (CPU2)*
11 PCIE Switch Board Connector (CON28) (CPU1)*
12 LGA 2011 CPU Socket (CPU1)
13 PCIE Switch Board Connector (CON29)(CPU1)*
14 CPU 1 Fan Connector (CPU1_FAN1)
15 Front Fan Connector (FRONT_FAN2)
16 CPU PECI Jumper (PECI1)
17 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_
B2, White)
18 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_
B1, Blue)
19 SATA3 Connector (M_SATA_1), White
20 System Panel Header (PANEL1)
21 Auxiliary Panel Header (AUX_PANEL1)
22 Speaker Header (SPEAKER1)
23 TPM Header (TPM1)
24 Front Lan LED Connector (FRNT_LAN34)(For Mez-
zanine Card)
25 ME Recovery Jumper (ME_RECOVERY1)
26 Non Maskable Interrupt Button (NMI_BTN1)
27 SATA3 Connector (M_SATA_0), White
28 SATA3 Connector (SATA5), White
29 SATA3 Connector (SATA4), White
30 Vertical Type A USB 3.0 (USB3_5)
31 USB 2.0 Header (USB_3_4)
32 mini SAS Connector (SATA0-3)
33 mini SAS Connector (sSATA0-3)
*For EP2C612D16FM only
6
5
3
2
4
1
7
8
*15G065016100AK*
3
EP2C612D16FM / EP2C612D16FM-N
Quick Installation Guide
www.asrockrack.com
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10M/100Mbps
connection or no link
Blinking
Yellow
Data Activity Green 1Gbps connection
On Link
8LAN Port LED Indications
Recommended Memory Congurations
5
7
11
6
123
Open the socket levers and the
CPU socket cover.
Install the processor and close
the socket cover.
Close the socket levers. Remove
the CPU protection cap.
Install the CPU Fan and Heatsink
CPU_FAN
12
Apply the thermal grease. Install the
CPU fan and heatsink and secure
the screws.
Connect the CPU fan to the CPU
FAN connector.
Install the Memory
Install the Power Cables
123
Unlock a DIMM slot by
pressing the module clips
outward.
Insert the memory module. Lock the clips.
10 Screw Holes
IPMI LAN Port
1G LAN Port
System Panel Auxiliary Panel
12 Headers
9
A
B
A
B
A
B
A
B
B
A
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection
Blinking Data Activity (100Mbps) Orange 100Mbps connection
On Link Green 1Gbps connection
Install the Processor
ACT/LINK LED
SPEED LED
LAN Port
ACT/LINK LED
SPEED LED
LAN Port
GND
RESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
GND
SMB_CLK
SMB_Alert
CASEOPEN
1
SMB_DATA
+3VSB
LAN1_LINK
LED_PWR
LAN2_LINK
LED_PWR
+5VSB
GND
GND
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#
System Fault LED-
AB
CD
System Fault LED+
E
1
3V
3V
GND
GND
5V
5V
GND
PWROK_PS
5VSB
12V
12V
3V
3V
-12V
GND
PSON#
GND
GND
GND
5V
5V
5V
GND
N/A
12
24 13
4
8
1
5
+12V2
GND
1 CPU Conguration
CPU1
A1 A2 B1 B2 C1 C2 D1 D2
1 DIMM #
2 DIMMS # #
4 DIMMS # # # #
8 DIMMS ########
2 CPU Conguration
CPU1
A1 A2 B1 B2 C1 C2 D1 D2
1 DIMM #
2 DIMMS # #
4 DIMMS # # # #
8 DIMMS # # # #
12 DIMMS ########
16 DIMMS ########
CPU2
E1 E2 F1 F2 G1 G2 H1 H2
1 DIMM
2 DIMMS
4 DIMMS
8 DIMMS # # # #
12 DIMMS # # # #
16 DIMMS ########
CPU1
CPU2
DDR4-_A1
DDR4_A2
DDR4_B1
DDR4_B2
DDR4_D2
DDR4_D1
DDR4_C2
DDR4_C1
DDR4_E1
DDR4_E2
DDR4_F1
DDR4_F2
DDR4_H2
DDR4_H1
DDR4_G2
DDR4_G1
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
Rear I/O
Intel
C612
Remove the standoffs
from the chassis
-
1
-
2
ASRock Rack EP2C612D16FM Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ASRock Rack EP2C612D16FM-N User manual
-
ASRock Rack EP2C612D16HM Installation guide
-
-
-
-
-
-
ASRock Rack EP2C612D16SM User manual
-
-
Other documents
-
ASROCK EP2C612D16FM Installation guide
-
Supermicro X11DAi-N User manual
-
Supermicro X10DRW-NT User manual
-
Supermicro SUPERO X10DRW-i User manual
-
-
-
-
-
-
Supermicro SUPERO X10DRD-iTP User manual