SUNBA NVR-PF10-4K is a powerful Network Hard Disk Recorder (NVR) suitable for a wide range of video surveillance applications. It supports the addition of IP cameras, allowing you to monitor and record video footage from multiple sources. The NVR features advanced video management capabilities, including motion detection, recording scheduling, and video playback. With its intuitive user interface and comprehensive feature set, the SUNBA NVR-PF10-4K is an ideal solution for home, business, and industrial surveillance systems.
SUNBA NVR-PF10-4K is a powerful Network Hard Disk Recorder (NVR) suitable for a wide range of video surveillance applications. It supports the addition of IP cameras, allowing you to monitor and record video footage from multiple sources. The NVR features advanced video management capabilities, including motion detection, recording scheduling, and video playback. With its intuitive user interface and comprehensive feature set, the SUNBA NVR-PF10-4K is an ideal solution for home, business, and industrial surveillance systems.
NVR-PF10
Network Hard Disk Recorder
Quick Action Guide
Please read this guide carefully before using the product
APP: Download
Please log in for more software:https://www.uvision-tech.cn/cygj
Statement:
1. The product appearance diagram in this manual is for reference only, please refer to the
actual product.
2. This manual is a general and simple user manual, and the actual product shall prevail.
3. The company reserves the right to modify the contents of this manual without any notice or
prompt
4. Due to uncertain factors such as the physical environment, the actual value of some data
may deviate from the reference value provided in the manual. If there is any doubt or dispute,
please refer to the company's final interpretation.
Installation Instructions
● Make the equipment work within the allowable temperature and humidity range, and avoid
placing it in humid, dusty, extremely hot, extremely cold, strong electromagnetic radiation,
vibration and other places.
● Please ensure that the ambient voltage is stable and meets the power supply requirements
of the equipment. The equipment can only be used within the rated input and output range, meet
the lightning protection requirements, and be well grounded.
● Protect the power cord from being walked on or pinched, especially at plugs, power sockets,
and contacts leading from the device.
● Please check the correctness after the installation is completed, so as to avoid personal
injury and damage to equipment parts due to wrong connection when the power is turned on!
● Do not remove the tamper-evident seal on the device case cover by yourself. If you want to
unpack, please contact us first;
Otherwise, if the equipment cannot be maintained due to unauthorized operation, the company
will not be responsible for all the consequences arising therefrom, thank you for your
cooperation!
Hard disk installation: Note: Please disconnect the power
before installation
Step 1: Unscrew the screws on the front panel of the chassis and the upper cover, and
remove the upper cover Step
2: Slightly tighten the screws on the hard disk, but do not tighten them. Insert the hard
disk with loosened screws into the hole of the chassis along the hoist opening, and tighten
the screws to fix it.
Step
3: Use the data cable and power cable to connect the hard disk to the motherboard
through the interface Step
4: Cover the case and fix it with screws to complete the installation
Hard Disk Management
● After the disk is connected, you can view the disk quantity, working status, total capacity,
remaining capacity and format type information through Disk Management. (* All newly installed
hard disks must be formatted before use before normal use.)
step 1 step2 step 3 step 4
The following operations take NVR-5101E-10YS device as an example, other devices are
similar, the screenshots are for reference only, please refer to the actual interface.
Rear Panel Interface Definition
User login
● When logging in to the local interface for the first time, the default username: admin
Password: 123456
● Enter the preview screen, right-click and select [Main Menu] to display the user login dialog
box.
● In the login dialog box, select the login user, enter the correct password, and click <Login>
to log in to the device.
*For security reasons, after the user logs in for the first time, please change
the user name and password in the "User Management" immediately
Channel management:
Camera management
● Select [Main Menu>Channel>Channel Configuration] to enter the “IP Channel” interface.
● Click <Quick Search>, the system will automatically search for IP devices in the network
and refresh the IP channel status, click “ ”，Add IP devices to the channel
● Click <Add All> to add all the IP devices found to the NVR under the condition that the
number of devices does not exceed.
● Click <Manual Add> to manually input the IP address and corresponding parameters of the
IP device to be added to complete the addition.
● Check Click ，, select a device in the added device column, and click Remove Device to
delete the device.
network settings
● Select [Main Menu>System Configuration>Network Configuration] to enter the “TCP/IP”
interface.
● Modify the network IP address of the network hard disk video recorder according to the IP
address of the existing IPC.
Video plan
● Select [Main Menu>Storage>Recording Plan] to enter the “Recording Plan” interface
● Click the color block of the corresponding type on the right as required. Go to the schedule
on the left
, the mouse pointer becomes a drawing pen. Press and hold the left mouse button to
determine the starting point and duration of the drawing, release the left mouse button to
save the recording plan
.*By default, the system enables 7*24 hours of timing recording plan for each channel.
*If the settings of other channels are the same, you can click the <Copy> button to select the
corresponding channel
Video playback
● Enter the video playback interface, select the channel to be played back, select the date to
be played back, select the playback mode, and start playing.
Video backup
1. Insert a U disk into the USB port of the network video recorder
2. Select [Main Menu > Storage > Video Backup > Selected Channel, Start Time and End
Time > Video Type], click Search to enter the "Video Backup" interface
3. You can check the video files that need to be backed up and start the backup (the locked
video needs to be unlocked to be backed up)
shut down the system
Logout: log out of the current user, exit the menu, the next time you enter the menu, you need
to log in again;
Reboot: Exit the system and restart the system;
Shutdown: Exit the system and shut down the device.
*Device shutdown refers to shutting down running system processes without the device
being powered off. If it is not running for a long time, it is recommended to disconnect
the power
Mobile APP monitoring
● Select [Main Menu>System>Network Configuration] to enter the "Mobile Monitor" interface
● Enable cell phone monitoring (the system enables cell phone monitoring by default).
● If you have not downloaded the mobile client, you can scan the QR code to enter the mobile
client download page.
● If you have downloaded the mobile client, you can scan the scan button on the client interface
to obtain the registration code
● If the device is offline, the system will display common reasons for you to locate and solve.
● If the device is online, the interface will display the user name of the device being used.
If you want to unbind it, click the <Logout> button.
* Make sure that the NVR is connected to the external network. It is required to use a
network cable to directly connect the network port of the NVR, and use the legal IP
address available in the LAN to set the IP address of the NVR in the wired configuration
page.
Mobile APP to add NVR device
1. For the first time logging in to the SINO Cloud client software, directly click Add Device on
the page or "+" in the upper right corner, and select Scan and Scan the code to add a device in
the pop-up interface.
2. Enter the name of the device in the Add Device interface, click Start Live to complete the
addition
3. Device preview: In the default space interface, click the device to enter the preview interface,
click a channel in the preview interface, you can preview the channel picture in a single screen
4. Multi-screen preview: Click the "Play button" “”，Can play NVR at the same time to add
all channels.
share device
● Share the device with other people: enter the preview interface, and then click on the upper
right corner“ ”，Enter the user name or password of the other party in the pop-up
menu, select the sharing time and permissions, and click "Share".
LAN IE monitoring
1. Use a network cable to connect the network port of the NVR host to the switch of the LAN
2. Check the wired network IP address of the NVR host, open the computer IE, and enter its IP
address in the address bar (for example): 192.168.1.101
* Please make sure that the IP of the computer and the IP address of the NVR are in the
same network segment.
3 Enter the login interface, enter the correct user name (admin) and password (the default is
123456), and click login (the first time you log in to install the control, click "Download Plug-in"
at the top of the page, and exit Internet Explorer during the installation process)
4 Open the channel icon after logging in Output video preview. You can also enter the
parameter setting interface to set other functions.
Product warranty card (warranty period: one year)
This warranty card is applicable to all models of NVR DVRs you purchased from our company;
1. During the warranty period, please contact the company's after-sales service department for
any faults caused by the product itself;
2. After purchasing various types of NVR DVRs from our company, please mail the completed
warranty card in time, you can enjoy free maintenance and replacement, otherwise it will not
be handled;
3. The following situations are paid warranty:
a) Equipment failure caused by man b) Failure caused by the use environment that does not
meet the requirements of this product c) No warranty card d) The warranty period has expired
We need you to provide correct user and usage information for warranty purposes.
Warranty Card Information
Product model: __________ Product serial number: __________
Order ID: __________
Username: __________ Contact: __________ Telephone: __________
In order to provide you with better service, please keep this
card properly
-
1
-
2
SUNBA NVR-PF10-4K is a powerful Network Hard Disk Recorder (NVR) suitable for a wide range of video surveillance applications. It supports the addition of IP cameras, allowing you to monitor and record video footage from multiple sources. The NVR features advanced video management capabilities, including motion detection, recording scheduling, and video playback. With its intuitive user interface and comprehensive feature set, the SUNBA NVR-PF10-4K is an ideal solution for home, business, and industrial surveillance systems.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Aztech PoE 8CH NVR Installation guide
-
Triax DVR User manual
-
Brickcom NR-2008 User manual
-
ORPHEUS ORPHEUS-NVR-4 User manual
-
Provision ISR NVR2-4100 User manual
-
Provision ISR NVR-4100P User manual
-
Provision-ISR NVR-4100 User manual
-
Provision-ISR NVR-8200 User manual
-
Provision-ISR NVR-16400 User manual
-
ROHS QH-NVR User manual
