Aztech PoE 8CH NVR Installation guide

  • Hello! I've reviewed the user guide for the NVR. It outlines the process of installing a hard drive, from loosening screws to securing the cover back in place. I'm ready to answer any specific questions you have about this process or the device based on the document.
  • How many screws do you need to loosen to open the NVR bottom cover?
    Which direction do you push the hard disk when installing it?
    How many screws are used to secure the bottom cover after hard disk installation?
Place the hard disk onto the connector from the right. Push it towards the left until it is fixed into position
Put the NVR bottom cover back in place and secure the hard disk with screws according to the drawing below
Loosen the seven screws according to the
instructions in the drawing, and open the
NVR bottom cover
Connect the data line and power line respectively
Put the NVR bottom cover back in place and secure the cover
with 7 screws according to the drawing below
/