KWorld PC TO TV VIDEO BOX User manual

Brand: KWorld

Model: PC TO TV VIDEO BOX

Category: Video converters

Type: User manual

KWorld PC TO TV VIDEO BOX is a real-time external scan converter that transforms your computer's RGB signal into NTSC or PAL signals, allowing you to connect your PC or Macintosh to any TV or video projector for presentations or home entertainment. With support for resolutions up to 1024x768 and 16.7 million colors, you'll enjoy sharp and vibrant images on your TV.

PC TO TV

VIDEO BOX

User’s Manual

Kworld Computer Co., Ltd.

www.kworld.com.tw

KWORLD PC TO TV VIDEO BOX

Chapter 1 Introduction

The PC TO TV VIDEO BOX is a high-resolution video scan converter that converts

computer’s RGB signal into NTSC or PAL signal. No software driver is required.

Simply connect the PC TO TV VIDEO BOX to any TV or video projector for a

hyper-effective presentation.

Features

z Real time external Scan Converter for NTSC or PAL systems

z Support for PC and Macintosh

z Plug-n-Play installation, no software driver required

z Supports resolution up to 1024*768 (60Hz) with 16.7 million colors

z Simultaneous display on PC monitor and TV

z High clarity 5-line anti-flicker filter

z VGA pass through function when power off

z Wireless remote control access to all function

z Save settings during power-off

z 200% Zoom and Pan function

z All-inclusive output types: Composite (AV) and S-Video

Applications

z Business presentation

z Demonstration tape production

z Educational aid-tools

z Home entertainment

z Provide VCD and DVD video to TV

Supported Systems

z All IBM PC compatible systems and notebooks

z Most Apple Macintosh systems and PowerBooks (with optional Mac cables)

Package content

z PC TO TV VDIEO BOX

z 15 Pin Male output to 15 Pin Male and 15 Pin Female (The Y shape Cable to

connect to VGA Card and Monitor)

z Power Adapter from Keyboard (AT and PS/2).

z AV cable

z SVHS cable

z User’s manual

z Remote control (Optional)

RGB to SCART Cable (Optional for European system)

KWORLD PC TO TV VIDEO BOX

Chapter 2 Installation

Picture 1. The installation diagram of the PC TO TV BOX

1. Power off your computer. Disconnect your monitor with your computer.

2. Connect the 15 Pin Male Signal Cable (Y Shaped) to the “VGA IN/OUT” on this

PC TO TV BOX.

3. Other the other side of the Signal Cable:

Connect the 15 Pin Male to the VGA Port of your PC

Connect the 15 Pin Female to the Monitor.

4. Use AV cable or S-VHS cable to connect "VIDEO OUT" or "S-VIDEO OUT"

with your TV, VCR, or Projector. "S-VIDEO OUT" will produce sharper and

brighter image. Refer to the owner's manual of your TV, VCR, or Projector for

settings to accept video from the PC TO TV BOX.

5. Turn on your computer and TV/projector.

For IBM PC Notebooks

1. Using PC TO TV BOX to convert your notebook display to the TV, you may need

to turn on the notebook's external video function. Please refer to your notebook

user manual to turn on the external video function.

2. It's best for you to use the A/C power for your notebook if you use PC TO TV BOX

to convert notebook image to TV.

KWORLD PC TO TV VIDEO BOX

Chapter 3 Function Description

Picture 2. The PC TO TV VIDEO BOX

After installation, you should see your computer display on your TV. To configure

your PC TO TV VIDEO BOX, you can use touch button on the unit.

Button Definition

1.”POWER” button

Power On/Off the PC TO TV BOX

2.”RESET” button

Reset the PC TO TV BOX

3.”SIZE” button

Switch the display size on TV ( support only in 640X480 display mode)

4."ZOOM" button

Switch between Normal and 200% Zoom display mode

5.Position buttons

Adjust the TV display position or pan the Zoom area in Zoom mode

KWORLD PC TO TV VIDEO BOX

Chapter 4 Using Remote Control

Picture 3. The Remoter

Reset: Reset PC TO TV VIDEO BOX

Sharpness: Adjust the TV display sharpness

Size: Switch the display size on TV

Position buttons: Adjust the display position or pan the Zoom area in Zoom mode

Zoom: Zoom in and zoom out

Freeze: Freeze the display video on the TV

Chapter 5 Switch TV System

The PC TO TV VIDEO BOX supports either NTSC or PAL TV system. You can use

the TV standard switch to change the TV system. Please power off the Video before

change the setting.

Switch

Television Standard

1 2 3 4

NTSC ON ON ON OFF

NTSC-EIA ON OFF ON OFF

PAL-M ON ON OFF OFF

PLA-N OFF ON ON OFF

PAL-B/D/G/H/I OFF OFF ON OFF

PAL-combination N OFF OFF OFF OFF

RGB OUT Enable ON

KWORLD PC TO TV VIDEO BOX

Chapter 6 Trouble Shooting

Problems Possible solutions

Abnormal TV Display 1.Press the RESET button

2.Check the TV Standard Switch in on right position

(Please refer to Chapter 5 Switch TV System)

3.Check the Signal Cable is connected well

No Power LED light 1.Check the power adapter plug-in correctly

2.Check the power switch was pushed down.

(Power ON)

No video output 1.Check the power is on

2.Check the cable of video out is connected correctly.

3.Check the TV channel of video input is correct.

4.Check the TV Standard Switch is correct.

(Please refer to Chapter 5 Switch TV System)

5.Check the VGA cable is connected correctly.

6.If connect from notebook, check the CRT output

is enabled.

Just black/white display

on TV

Check the TV Standard Switch in on right position

(Please refer to Chapter 5 Switch TV System)

Line flicker on TV Press the “SHARP” button on Remoter to adjust.

No extra video input

connector in TV set

You may need a special adapter call RF modulator, this

device converts the composite video signal of the PC

TO TV VIDEO BOX to an antenna signal.

KWorld PC TO TV VIDEO BOX User manual

Brand: KWorld

Model: PC TO TV VIDEO BOX

Category: Video converters

Type: User manual

Download PDF

report

KWorld PC TO TV VIDEO BOX User manual

KWorld PC TO TV VIDEO BOX User manual

Related papers

Other documents