2. Stemedu
  3. Stemedu ESP32-CAM ESP32 OV2640 Camera

Stemedu Stemedu ESP32-CAM ESP32 OV2640 Camera User manual

  • Hello! I am an AI chatbot trained to assist you with the Stemedu Stemedu ESP32-CAM ESP32 OV2640 Camera User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.diymalls.com [email protected]
ESP32-Cam
You can use serial module to program the ESP-Cam, such as CP2102 module, CH340
module, FTDI programmer, FT232RL programmer etc.
Connection:
GPIO0 pin need to be connected with GND(green cable in the picture)
When uploading the code, it shows connecting_connecting_...please press RST button once
After program is finished, please disconnect the cable between GPIO 0 and GND
Reference Tutorial links:
www.diymalls.com [email protected]
How to Program / Upload Code to ESP32-CAM AI-Thinker (Arduino IDE)
https://randomnerdtutorials.com/program-upload-code-esp32-cam/
ESP32-CAM Take Photo and Display in Web Server:
https://randomnerdtutorials.com/esp32-cam-take-photo-display-web-server/
Note: After programmed, please disconnect the cable between GPIO 0 and GND
Then you will see the print information once you open the serial monitor window
ESP32-CAM Troubleshooting Guide: Most Common Problems Fixed:
https://randomnerdtutorials.com/esp32-cam-troubleshooting-guide/
ESP32 projects:
https://randomnerdtutorials.com/projects-esp32-cam/
/