Samsung HW-HM45C/ZA-ZZ01 Owner's manual

Brand: Samsung

Model: HW-HM45C/ZA-ZZ01

Type: Owner's manual

This manual is also suitable for

HW-HM45/ZA-ZZ01

HWoHM45C

Imagine the possibilities

Thank you for purchasing this Samsung product

To receive more complete service, please register your product at

wwwosamsu r]gocom/register

'This Nanum Gothic Ecofont is provided by NAVER_

I FEAZUH:4ES

FEATURES

rd SoundConnect

TV SoundConnect letsyou tisten to audio from ),ourTVon ),our Soundbar via a Btuetooth connection and tets

you controt the sound,

HDMI

HDMt transmits video and audio signalssimultaneously, and provides a dearer picture_

The unit isatso equipped with the ARCfunction which lets you listen to sound from ),our TV through the

Soundbar via an HDMt cable,This function isonty avaitaUe if you connect the unit to an ARCcompliant TV_

3D SOUND

The 3D SOUND feature adds depth and spaciousnessto ),our listening experience,

Wireless Subwoofer

Samsung's wireless module does away with cables running between the main unit and the subwoofer_

Instead, the subwoofer connects to a compact wireless module that communicates with the main unit,

Special Sound Effects

You can select different Sound Effects - MUSIC/ VOICE/ SPORTS/ CINEMA / STANDARD(Original Sound) -

depending on the type of content you want to enjoy,

Multi_function Remote Control

You can use the supplied remote controt to controt various operations with the simple pressof a button,

USB Host Support

You can connect and play music rites from externat USBstorage devicessuch asMP3 players,USBflash

memo,3,, etc, using the Soundbar's USBHOSTfunction,

Btuetooth Function

You can connect a BhJetoothdevice to the Soundbar and enjoy music with high quality stereo sound, att

without wires!

_I DOLBY_

OIGITAL

Manufactured under ticensefrom Dotby Laboratories, Dotby and the double@ symbot are trademarks of

Dolby Laboratories,

2.0Channel

For DTSpatents, see http:iipatents,dts,com, Manufactured under ticensefrom DTSLicensing Limited, DTS,

the Symbol, & DTSand the Symbol together are registered trademarks, and DTS2,0 Channel isa trademark of

DTS,Inc_@DTS,tnc, A1tRights Rese_,ed,

H-"IN'I|

The terms HDMt and HDMt HigMDefinition Multimedia Interface, and the HDMt Logo are trademarks or

registered trademarks of HDMt Licensing LLCin the United Statesand other countries,

SAFE FY _ F.......I 4 P__''_' £_'hl J_,/l's_Vik'_ _,/ '4

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RnSKOF ELECTRtCSHOCK, DO NOT REMOVE THE COVER (OR BACK),

NO USER-SERVICEABLEPARTSARE INSIDE, REFERSERVtONG TO QUALIFIED SERVICEPERSONNEL

RiSKOFELECTRICSHOCKDO

NOTOPEN

CAUTION: TO REDUCETHE RISKOF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER (OR BACK),

NO USERSERVICEABLERARTSINSIDE,REFER

SERVICINGTO QUAUFIED SERVICEPERSONNEL,

The lighting flash and arrowhead within the

triangle indicates that there is dangerous

voltage Inside the product,

The explanation point within the triangle

indicates that there are important instructions

accompanying the product,

WARNING

• To reduce the risk of fire or eiectric shock, do not expose this appliance to rain or moisture

• To prevent injury, this apparatus must be secureiy attached to the floodwail in accordance with the instaiiation instructions

• This product contains chemicais known to the State of California to cause cancer and reproductive toxicity

CAUTION

• Do not expose this apparatus to dripping or splashing Do not put objects fiiled with liquids, such asvaseson the apparatus

• Toturn this apparatus off compietely, you must puil the power piug out of the wall socket, Consequentiy, the power piug

must be easiiyand read@accessibieat ail times

This product satisfies FCCregulations when shieided cablesand connectors are usedto connect the unit to other equipment,

To prevent electromagnetic inter[erence with eiectric appiiances, such asradios and teievisions, use shieided cabies and

connectors for connections

FCCNOTE(for USA):

This equipment hasbeen tested and found to compiy with the iimits for a CiassBdigitai device, pursuant to Pad: 15 of the FCC

Ruies These iimits are designed to provide reasonable protection against harmfui intederence in a residentiai instailation,

This equipment generates, usesand can radiate radio frequency energy and, if not instailed and used in accordance with the

instructions, may cause harmfui interference to radio communications NoweveB there is no guarantee that intederence wiil

not occur in a pa_ticuiar installation

If this equipment does cause harmfui inter[erence to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the intederence byone or more of the foilowing measures:

• Reorient or reiocate the receiving antenna,

• Increasethe separation between the equipment and receiver

• Connect the equipment to an outiet that is on a different circuit than the radio orTv'

•Consuit the deaier or an experienced radio/TV technician for heip

Caution : FCCreguiations state that any unauthorized changes or modifications to this equipment may void the user's

authority to operate it.

Important Safety Instructions

Readthese operating instructions carefuily before using the unit, Foilow

operating instructions handy for future reference

1) Read these instructions. 10)

2) Keep these Instructions

3) Heed all warnings.

4) Follow all instructions. 11)

5) Do not use this apparatus near water

6) Clean only with dry cloth. 12)

7) Do not block any ventilation openings Install in accordance

with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat. 13)

9) Do not defeat the safety purpose of the polarized or

groundingrtype plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two 14)

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug

does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

all the safety instructions iisted beiow Keep these

Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

Only use attachment!accessories specified

by the manufacturer

Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer or sold with the apparatus.

When a cart is used, use caution when

moving the cart!apparatus combination to

avoid injury from tip over

Unplug this apparatus during lightning storms or when

unused for long periods of time

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped

Ensurethat the AC power supply in your house complies with the power requirements listed on the

identification sticker located on the back of your product Install your product horizontally, on asuitable base

(furniture), with enough space around it for ventilation (3~4 inches), Make surethe ventilation slots are not

covered_Do not placethe unit on amplifiers or other equipment which may become hot, This unit is designed

for continuous use_Tofully turn off the unit, disconnect the AC plug from the watt outtet, Unplug the unit if

you intend to leave it unused for a tong period of time,

During thunderstorms, disconnect the AC plug from

the wattouttet, Voltage peaks due to lightning could

damage the unit,

Protect the product from moisture (Le_vases),and

excessheat (e_g,afireplace) or equipment creating

strong magnetic or electdc field£ Disconnect the

power cable from the AC supply if the unit

matfunction£ 'four product is not intended for

industrial use, tt isfor personal use onty,

Condensation may occur if your product has been

stored in cold temperatures, tf transpoRing the unit

during the winter, wait approximately 2 hours until

the unit has reached room temperature before using,

Do not expose the unit to direct sunlight or other

heat sources,This could teadto overheating and

causethe unit to malfunction,

The batteries used with this product contain

chemicals that are harmful to the environment Do

not dispose of batteries in the genera1household

trash, Do not dispose of batteries in a fire, Do not

shoR circuit, disassemble,or overheat the batteries,

Danger of explosion if batters, is incorrectly replaced,

Replaceonty with the same or equivalent type,

product and keep it away from children, tf you think batteries might have beenswallowed or placed inside

any par of the body, seek immediate medical attention,

CONTENTS

2 Licenses

3 SAFETY INFORMATION

3 Safety Warnings

4 Precautions

6 GETTING STARTED

6 Before reading the User's Manual

6 What's hduded

7 Top/Front Panel

8 Rear Panel

9 REMOTE CONTROL

9 Remote Control Buttons and Functions

hstalling the Wall Mount

Detaching the Wall Mount

hstalling the bracket without referring

to the Wall mount Bnstallation Guide

Connecting the Wireless Subwoofer

Connecting an External Device using an

HDMB cable

Connecting an External Device using

Audio (analog) cable or Optical (digital)

cable

i7 Input mode

i7 ARC (HDMIOUT)

i8 Bluetooth

20 TV SoundConnect

2i USB

22 Software Update

23 TROUBLESHOOTING

24 APPENDIX

24 Specifications

Figures and i!tustrations in this User Manua! are t

provided for reference on!y and may differ from

actual product appearance_

[ GEf_NGS_}&R_ED

GETTING STARTED

BEFORE READING THE USER'S MANUAL

Note the following terms before reading the usermanual,

Icons used in this manual

Safety Instructions and Troubleshooting

t ) Besure to familiarize yourself with the Safety Instructions before using this product, (Seepage 3)

2) tfa problem occurs, check Troubleshooting, (Seepage 23)

@20t 4 Samsung Electronics Co,,Ltd,

Alt rights reserved; no part of this useCsmanual may be reproduced or copied without the prior written

permission of Samsung Electronics Co,,Ltd,

WHAT'S _NCLuDED

Check for the supplied accessoriesshown below,

(Wall Mount L: 1EA)

(WallMount R:1EA)

Remote Control / Lithium UserManual /

Batterj (3V : CR2032) Quick Guide Bracket-Walt Mount Watt Mount Guide

(L :AH61-03833A / AH63-03710A

(AH59-02631A / (AH68-02720B)/ R:AH61-03834A)

4301-001042) (AH68-02707Q)

(Holder-screw1:2EA)

(Holder-screw2: 2EA)

Holder-screw

Power Cord DC Adapter AUX Cable

(AH61-03342A/ (3903-000598) (BN44-00722A) (BN39-01286A)

6001-001961 )

HDMBCable Optical Cable

USBCable

(AH39-01270A) (Only HW-HM45C) (Only HW-HM45C)

(BN39-01583A) (AH39-00925B)

o The appearance of the accessoriesmay differ slightly from the illustrations above,

Usethe dedicated USBcable to connect external USBdevicesto the unit,

DESCRIPTIONS

TOP/FRONT PANEL

_ (Power) Button

Turnsthepoweron andoff,

Di!u+ E Oi_;S

VOL -/+

Controls the volume level,

The numeric value of the vohJme level

appears in the front panel display,

Displaysthe current mode,

F, (Function) Button

Selectsthe DiN, AUX, HDMt, BT,TV,

USBinput,

+ While the unit is powered on,

pressing the ( F, ) button for more

than 3 secondssets the button to

act as MUTE button, To cancel

MUTE button setup, pressthe ( E )

button for more than 3 seconds

again,

+ Depending on its manufacturing specifications, the ( F', ) button may bechanged into the (_ )

button which functionally works just the same,

When you turn on this unit, there wit1be a 4 to 5 second delay before it produces sound,

tf you want to enjoy the sound only from the Soundbar, you must turn off the TV'sspeakers in the

Audio Setup menu of your TV,Referto the owner's manuat supp%d with your TV,

I C¸",-TT _ _

:sE _:s SIARI/}©

REAR PANEL

HDMI iN I

Inputs digital video and audio

signats simultaneously usingan

HDMt cable, Usewhen

connecting asupported

externat device,

AUX iN

Connect to the Anatog output

of an externat device,

(usBPort)

Connect USBdevicessuch as

MP3 players here to playfiles

on the devices,

DC 24V (Power Supply in)

Connect the DCpower adaptor

to the power supply jack, and

then connect the AC power

adaptor phJgto a watt outtet,

OPTICAL iN

Connect to the digital (optic@

output of an external device,

--4 HDMI OUT (TV)

Outputs digitat video and audio

signats simultaneously using an

HDMt cable,

When disconnecting the power cableof the AC power adaptor from the watt outtet, pult the plug,

Do not pult the cabte,

o Do not connect this unit or other components to an ACoutlet until at1connections between

components are complete,

REMOTE CONTROL

REMOTE CON"TROt BUTTONS AND FUNCTIONS

SOURCE

Pressto select a source connected to the Soundbar,

MUTE

You can turn the volume down to 0 with the push of a button,

Pressagain to restore the sound to the previous volume level,

REPEAT

Pressto set the REPEATfunction during music playbackfrom a USB

device,

REPEATOFE: Cancels RepeatPlayback,

REPEATEBLE: Repeatedly playa track,

REPEATALL : Repeatedly play atttracks,

REPEATRANDOM : Playstracks in random order,

(A track that has atready been played may be played again,)

SkipForward

tf there is more than one rite on the device you are playing, and you

pressthe _1 button, the next rite is selected,

AUDIO SYNC

tf the Soundbar isconnected to a digitat TV and the video appears out

of sync with the audio, pressthe AUDIO SYNC buttons to sync the

audio with the video. Usethe I_t buttons to set the audio delay

between 0 ms and 300 ms. tn USBmode, TV mode, and BTmode, the

Audio Syncfunction may not work.

DBMMER/Anynet+

DBMMER: Pressthe DIMMER/Anynet+ button to control the

brightness of the display.

Anynet+ : Pressand hotd the D_MMER/Anynet+ button for more than

3 secondsto turn the Anynet+ function on or off.

(Auto Power Link : Default OFF,Anynet+ ON / Power Link Off or

Anynet+ OFF/ Power Link ON ). The Anynet+ function lets you controt

the Soundbar with the remote from an Anynet+ compatible Samsung

%( The Soundbar must be connected to the %/via an HDM1cable.

* Auto Power Link

Synchronizesthe Soundbar to aconnected Opticat source via the

Opticat jack so it turns on automatically when you turn on your Tk4

EQUALIZERWOOEER

Pressto select Treble or Bass.Then, use the I_ _¢.1button to adjust

the Trebleor Bassvotume from -3 to +3.

YOucan control the subwoofer volume. Pressthe I_-n button to

increaseor decreasethe subwoofer votume. You can set it from

SW -6 to SW +6,

o Soundbar isa Samsung proprieta,5, name.

o Operate the TV using the TV's remote controt.

POWER

Turnsthe Soundbar on and off,

VOLUME

Adjusts the votume 1eve1of the unit,

Play/Pause

Pressthe _n button to pause playing the rite temporarily,

Pressthe _ n button again to play the selected rite,

Skip Back

tf there is more than one rite on the device you are playing, and you

pressthe I_ button, the previous rite isselected,

SOUND EFFECT

You can select from 5 different sound modes - MUSBC,VOBCE,

SPORTS,CBNEMA,and STANDARD- depending on the type of sources

you want to enjoy,

Pressthe SOUND EFFECTbutton on the remote controt,

Selectthe STANDARDmode if you want to enjoy the originat sound,

Pressthe SOUND EFFECTbutton for more than 5 seconds to turn on

or off Sma_ Votume,

* Sma_ Votume

This wit1regulate and stabilize the votume tevelagainst a drastic

votume change caused by a channel change or scenetransition,

Btuetooth POWER

Pressthe Btuetooth POWERbutton on the remote to turn the

Btuetooth POWERon function on and off,

See pages t 9 and 20 for details,

3D SOUND (3D Sound Plus)

Pressthe 3D SOUND button on the remote to add depth and

spaciousnessto the sound,

Pressthe 3D SOUND on the remote controt,

Eachtime the button is pressed,the selection changes asfottows :

3D SOUNDPLUSOFF_ 3D SOUND PLUSMUSIC

3D SOUND PLUSMOVIE

Installing the Battery in the Remote Control

asshown in the figure above. Coveron and atign the i@i marks side asfar as it w!tt go to fix

by side asshown in the figure above, it in _:

CONNECTIONS

_NSTALUNG 'THE WALL MOUNT

You can usethe watt mount bracket to raount this unit on awatt,

Installation Precautions

tnstatton ave_icat watt onty,

For the installation, avoid a tocation with high temperature or

humidity, or a wattthat cannot sustain the weight of the set,

Check the strength of the watL tfthe watt is not strong

enough to support the unit, reinforce the watt or instatt the

unit on a different watt that can support the unit's weight,

Purchaseand use the fixing screws or anchors appropriate for

the kind of wan you have (plaster board, iron board, wood,

etc,), tf possible, fix the suppo¢ screws into watt studs,

o Purchase wan mounting screws according to the type and

thickness of the watt you wit1mount the Soundbar on,

Diameter : M5

Length: t 3/8 in (35 mm) or tonger recommended,

Connect cables from the unit to extemat devicesbefore you

install it on the watt,

Make surethe unit is turned off and unplugged before you

instatt it, Othe_vise, it may causean electric shock,

!. Placethe installation guide against the watt su,fface,

, The installation guide must be tevel,

tnstattat least 2 inches (5 cm) below the %/, if the TV is

mounted on the watt,

2. Mark the tocation where the screws wit1go through on the

watt using a pen, and then remove the installation guide,

3. Fastenthe watt mounts and screws to the marked locations,

The 1eftand right mounts are different shapes,

4. Securethe two hotder screwsto the screw holes on the back

of the Soundbar's main body, one on the 1eftand one on the

right,

5. Insert the USBcable into the back of the Soundbar before

installing iton the watt,

6. Set the hotder screwson the backof the Soundbar into the grooves of the watt mount_

For safe installation, make sureto push the hotder screwsattthe way to the bottom of the grooves,

DE'TAC_'qING 'T_qEWALL MOUb_T

!. Puttthe Soundbar upwards asshown in the figure to separate

it from the watt mount,

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

____

Do not hang onto the installed unit and avoid striking or dropping the unit,

Securethe unit firmly to the wattso that it does not fat1off, tf the unit fattsoff, it may cause an

injuB, or damage the product,

When the unit isinstalled on a watt, pleasemake sure that chitdren do not pult any of the

connecting cables, as it may causeit to fat1,

® _r the optima1performance of a walt mount installation, instal1the speaker systemat 1east2 inches

(Bcm) below the %/,if the TV ismounted on the wail

For your safety, if you do not mount the unit on the watt, instatt it on a secure, fiat surface where it

is untikely to fat1,

/NS"LALL/NG 'TIDE BRACKET W/'TtqOU'T REFERRING "TO 'TIqE

WALboMOU_T INS']ALLATION GUIDE

!. Ptacethe "WattMount L"on the desiredwatt surface white paralleled to the floor as shown above, and fix

a screw through the hote on its right end,

2. Ptacethe "WattMount R"on the desiredwatt surface white paralleled to the floor as shown above, and fix

a screw through the hote on its 1eftend,

tf Watt Mount LiR are to be mounted beneath the TV,checktheir fixing hote positions in steps t and 2,

so that they are atigned appropriately to the center of the TV'sbottom,

S. Fixscrewsthrough the restof hotes,

CONNECTING THE WIRELESS SUBWOOFER

The Subwoofer's 1inkingIDis preset at the factoB_and the main unit and subwoofer should 1ink(connect

wirelessly) automatically when the main unit and subwoofer are turned on_Ifthe Link indicator ( d_, ) doesnot

tight when the main unit and subwoofer areturned on, pteaseset the IDby following the procedure betow_

IDSET

@÷

!. Plug the power cords of the main unit and subwoofer into an ACwatt outtet,

2. Pressthe BDSETbutton on the backof the subwoofer with asmatt, pointed object for 5 seconds,

The STANDBYindicator is turned off and the LINK indicator (Blue LED)blinks quickly,

3. White the main unit ispowered off (in STANDBYmode), pressand hotd the MUTE ( _ ) on the remote

control for 5 seconds,

4. The BDSETmessage appears on the Soundbar's display,

5. Tofinatize the 1ink,turn the main unit's power on white the subwoofePs Btue LEDblinks,

The main unit and the subwoofer should now be 1inked(connected),

The Link indicator (Blue LED)on the subwoofer should beon,

tfthe Link indicator is not sotid blue, the 1inkingprocess hasfaited, Turn off the main unit and start

again from Step 2,

Yk)ucan enjoy better sound from the wireless subwoofer by selecting a Sound Effect,

(Seepage t 0)

Beforemoving or installing the product, be sure to turn off the power and disconnect the power

cord.

tf the main unit ispowered off, the wireless subwoofer wit1be in standby mode and the STANDBY

LEDon the upper side wit1come on after the Link indicator (Blue LED)blinks for 30 seconds.

tf you use a device that usesthe same frequency (2.4GHz) as the Soundbar near the Soundbar,

intederence may causesome sound interruption.

The transmission distance of the wireless signat between the main unit and subwoofer isabout 33

ft. but may va6, depending on your operating environment tf a steel-concrete or metallic watt is

between the main unit and the wireless subwoofer, the system may not operate at att, because the

wireless signat cannot penetrate metat.

tf the main unit doesn't make a wireless connection, fottow steps t-5 to re-set the connection

between the main unit and wireless subwoofer.

_ The wireless receiving antenna is buitt into the wireless subwoofer. Keepthe unit away from water

and moisture.

For optima1listening performance, make surethat the areaaround the wireless subwoofer tocation

is dear of any obstructions.

_s_'_ _ _1 _ s_ _ _

CONNECTING AN EXTERNAL DEVICE USING AN HDMI CABLE

HDMt is the standard digitat interlace for connecting to TVs, projectors, DVD players, Btu-ray players,set top

boxes,and more,

HDMI prevents any degradation to the signal due to conversion to analog and maintains the video and

audio quality of the original digital source

HDMI IN HDMI OUT (TV)

HDMI Cable

(supplied only HW-HM45C)

o'j

Digital Devices

HDMI Cable

(supplied only HW-HM45C)

HDMI IN HDMI OUT (ARC)

Connect an HDMt cable from the HDMI INjack on

the back of the product to the HDMt OUTjack on

your digitat device,

and,

HDMI OUT (TV)

Connect an HDMt cable from the HDMI OUT(TV}

jack on the back of the product to the HDMt tN jack

on your T'_(

The ARCfunction allows digitat audio to output via

the HDMI OUT (ARC) port,

tt can beenabled only when the Soundbar is

connected to a TVthat suppo_s the ARCfunction

o Anynet+ must be turned on,

This function isnot available if the HDMt

cable does not support ARC,

HDMt is an interlace that enables the

digitat transmission of video and audio

data with just asingle connector,

CONNECTING AN EXTERNAL DEVICE USING AUDIO (ANALOG)

_:__° (DIGFAL) CABLE

CABLE OR O_ T,CAL

This unit comes equipped with one opticat in digital jack and one audio analog in jack, giving you two ways to

connect it to aTM

AUX IN

OPTICALIN

¢''- AU DIO _ d" OPTICAL "-h

/ OUTIf

/ _/if:

/ / BD/DVD player/

Audio Cable Optical Cable I J Set-top box/

(supplied only Game console

HW-HM45C)

AUXIN

Connect AUX BN(Audio) on the main unit to the

AUDIO OUTjack of the TV or Source Device,

Change the function to AUX,

OPTICALIN

Connect OPTBCALBN(Audio) on the main unit to the

OPTICALOUTjack of the TV or Source Device,

Change the function to DJN

o Do not connect the power cord of this

product or your TVto the watt outtet untit

attconnections between components are

complete,

o Beforemoving or installing this product,

besureto turn off the power and

disconnect the power cord,

FUNCTIONS

_NPUT MODE

Pressthe (Fm ) button on the main unit's top panel or the _ (SOURCE)button on the remote controt to

select the mode you want,

Optical Digital input DiN

AUX input AUX

HDMt input HDMB

BLUETOOTHmode ST

TV SoundConnect TV

USBmode USB

Depending on its manufacturing

specifications, the (_, ) button may be

changed into the ( _ ) button which

functionally works just the same,

The unit turns off automatically in the following

situations,

DJNiHDMtiBTiTViUSBiARC Mode

tfthere is no audio signat for 25 minutes,

AUX Mode

tfthe AUX cable isdisconnected for

25 minutes,

tfthere is no KEYinput for 8 hours when the

AUX cable is connected,

To turn the Auto Power Down function

ON or OFF,pressand hotd the _-Hbutton for

5 seconds,AUTO POWER DOWN ON / OFF

appears on the display,

ARC (HDMI OUT)

ARC (Audio Return Channel) transfers digitat audio signatto the HDMt OUT (ARC) po_,

HDMBCable

!° Connect the TV supporting ARCto the Soundbar with an HDMt cable,

2. Turn on the ?4 and turn on the SoundbaPs Anynet+,

S. Pressthe ( F, ) button on the main unit's top panel or the _ (SOURCE)button on the remote controt to

select the DiN mode,

Depending on its manufacturing specifications, the ( _. ) button may bechanged into the (_ )

button which functionally works just the same,

o tf the HDMt cabte does not support ARCfeature, ARCmay not work property,

To turn off the ARCfunction, turn Anynet+ off,

You can connect a Btuetooth device to the Soundbar and enjoy music with high quality stereo sound, att

without wires!

To connect the Soundbar to a Bluetooth device

Check if the Bluetooth device suppo_s the Btuetooth compliant stereo headset function_

o Connect

!. Pressthe ( F. ) button on the main unit's top

panel or the _ (SOURCE)button on the

remote control to select the BTmode,

Y_)uwitt see BTREADYon the front displayof

the Soundbar,

2. Selectthe Btuetooth menu on the Bluetooth

device you want to connect, (Refer to the

BhJetoothdevice's user manual,)

3. Selectthe Stereo headset menu on the BhJetooth

device,

Vk)uwitt seea tist of scanned devices,

4. Select "[Samsung] Soundba¢' from the list,

When the Soundbar is connected to the

Btuetooth device, it witt display [Btuetooth

device name] _ BTon the front display,

The device name can onty be displayed in

English, An underline "" witt be displayed if

the name isnot in English,

tf the Btuetooth device hasfailed to pair with

the Soundbar, delete the previous "[Samsung]

Soundbar" found by the Btuetooth device and

have it searchfor the Soundbar again,

5. Ptaymusic on the connected device,

o Yk)ucan listen to the music playing on the

connected Bbetooth device over the

Soundbar,

In BTmode, the Play/Pause/Next/Prey

functions are not avaitabte_However, these

functions are available in Bbetooth devices

supporting AVRCR

Btuetooth device

® Depending on itsmanufacturing

specifications, the ( F. ) button may be

changed into the (_ ) button which

functionally works just the same,

tfasked for P1Ncode when connecting a

Btuetooth device, enter (0000>,

o Ontyone Btuetooth device can bepaired

at a time_

TheBhJetoothconnection witl be terminated

when you turn the SoundbarofL

The Soundbar may not perform Btuetooth

search or connection correctly under the

following circumstances:

- tf there isa strong electrical field around

the Soundbar,

If severalStuetooth devicesare

simultaneouslypairedwith the Soundbar_

- tf the Btuetooth device is turned off,

not in place,or malfunctions,

- Note that such devicesas microwave

ovens,wireless LANadaptors,

fluorescent lights, and gas stoves use

the same frequency range as the

Btuetooth device, which can cause

electric intefference_

The Soundbar supports SBCdata

(44,1kHz, 48kHz),

o Connect only to a Bbetooth device that

suppo_s the A2DP (AV) function,

¥k)ucannot connect the Soundbar to a

Bluetooth device that suppo_s onty the HF

(HandsFree)function,

Oncepaired the device,on D,INiAUXi

HDMtiUSBiARC mode, select "[Samsung]

Soundbar" from the list witt automatically

change to BTmode,

Bluetooth POWER on (Bluetooth POWER)

When the Btuetooth Power On function ison and the Soundbar isturned off, if a previously paired Btuetooth

device tries to pair with the Soundbar, the Soundbar turns on automatically,

!. Pressthe B[uetooth POWERon the remote white the Soundbar is turned on,

2. Btuetooth POWERon appears on the Soundbar's display,

Available only if the Soundbar ististed among the Btuetooth device'spaired devices, (The Btuetooth

device and the Soundbar must have been previously paired at least once}

Soundbar wit1appear in the Btuetooth device's searcheddevicestist onty when the Soundbar is

displaying [BTREADY],

tnthe TV SoundConnect mode, the Soundbar cannot be paired to another Btuetooth device,

To disconnect the Bluetooth device from the Soundbar

You can disconnect the Btuetooth device from the Soundbar, For instructions, seethe Btuetooth device's user

manual

The Soundbar wit1be disconnected_

When the Soundbar is disconnected from the Btuetooth device, the Soundbar wit1display

STBBSCONNECTEBon the front display,

To disconnect the Soundbar from the Bluetooth device

Pressthe _ (SOURCE)button on the remote controt or the (E ) button on the product's top panel to

switch from STto another mode or turn off the Soundbar,

The connected Btuetooth device wit1wait a certain amount of time for a response from the Soundbar

before terminating the connection, (Disconnection time may differ, depending on the Btuetooth device)

o Depending on its manufacturing specifications, the (F.) button may bechanged into the (_)

button which functionally works just the same,

tn Btuetooth connection mode, the Btuetooth connection wit1be tost if the distance between the

Soundbar and the Bluetooth device exceeds t6,25 ft, (Sin),

The Soundbar automatically turns off after 25 minutes in the Readystate,

More About Bluetooth

Btuetooth isa technology that enables Btuetooth-compliant devicesto interconnect easitywith each other

using ashort wireless connection,

A Btuetooth device may causenoise or malfunction, depending on usage, when:

A pa_ of your body is in contact with the receiving/transmitting system of the Btuetooth device or the

Soundbar,

tt issubject to electrical variation from obstructions caused by a watt, corner, or office pa¢ition_

tt isexposed to electrical interference from same frequency-band devicesincluding medicat equipment,

microwave ovens, and wireless LANs,

Pair the Soundbar with the Btuetooth device white they are dose together,

The further the distance between the Soundbar and Btuetooth device, the worse the quatity is,

tf the distance exceedsthe Btuetooth operational range, the connection islost,

o tn poor reception areas, the Btuetooth connection may not work property,

The Btuetooth connection onty works when it is close to the unit, The connection wit1be automatically cut

off if the Btuetooth device isout of range, Evenwithin range, the sound quatity may be degraded by

obstaclessuch as wattsor doors,

Thiswireless device may causeelectric interference during its operation,

TV SOUNDCONNECT

You can enjoy TVsound through your Soundbar when it is connected to a Samsung TV that suppo_s the TV

SoundConnect function,

Connecting a TV to the Soundbar

Connect

!. Turn on the TV and Soundbar,

Turn on the menu of the -RI,

Move to Speaker Settings on "Sound" tab,

Set the "Add New Device" menu to "On",

2. Pressthe ( F. ) button on the main unit's top

panel or the _--_ (SOURCE)button on the

remote controt to select the TV mode.

3. On the TV,a message asking whether to enable

the TV SoundConnect function, "[Samsung]

Soundbar" isdisplayed on the TVscreen,

4. Select<Yes>to finish connecting the TVand

Soundbar by TV remote controt,

® Depending on its manufacturing

specifications, the ( E ) button may be

changed into the (_ ) button which

functionally works just the same,

Switching the Soundbar's mode from TV

to another mode automatically terminates

TV SoundConnect,

Toconnect the Soundbar to another TV,

the existing connection must be

terminated,

Terminate the connection to the existing

TV,and then pressthe I_11button on the

remote control for 5 seconds to connect

to another TV

TheTV SoundConnect (SoundShare)

function issupported by some Samsung

TVs reteasedfrom 2012 on_Check

whether your TVsuppoCs the TV

SoundConnect (SoundShare)function

before you begin, (_r fu_her information,

refer to the TV'susermanuaL)

tf your SamsungP,/was releasedbefore

2014, check the SoundSharesetting menu_

® If the distance between the TV and

Soundbar exceeds 1625 ft, (5m), the

connection may not be stableor the audio

may stutter, If this occurs, relocate the TV

or Soundbar so that they are within

operational range, and then re-establish

the TV SoundConnect connection_

o TV SoundConnect Operational Ranges:

Recommended pairing range: within

20 inches (within 50cm)

Recommended operational range:

within t6,25 ft, (Sm)

The Play/Pause,Next, Preybuttons are

not operable in TV SoundConnect mode,

Using the Bluetooth POWER On

The Btuetooth POWEROn function isavailable after

you have successfullyconnected the Soundbar to a

Btuetooth compatible TV usingTV SoundConnect,

When the Btuetooth POWEROn function isON,

turning the connected TV on or off wit1turn the

Soundbar's power on and off as welt,

!. Connect the TV to your Soundbar using the TV

SoundConnect function,

2. Pressthe Btuetooth POWERbutton on the

Soundbar remote, "BLUETOOTHPOWERON"

appears on the Soundbar's display,

BLUETOOTHPOWERON :The Soundbar turns

on and off when you turn the TV on or ofL

BLUETOOTHPOWEROFF:The Soundbar

onty turns off when you turn the TVoff,

o This function issupported by some

Samsung TVs releasedfrom 2013 on,

Page is loading ...

Samsung HW-HM45C/ZA-ZZ01 Owner's manual

Brand: Samsung

Model: HW-HM45C/ZA-ZZ01

Type: Owner's manual

This manual is also suitable for

HW-HM45/ZA-ZZ01

Download PDF

report

Samsung HW-HM45C/ZA-ZZ01 Owner's manual

This manual is also suitable for

Samsung HW-HM45C/ZA-ZZ01 Owner's manual

Related papers

Other documents