Zeta FE-CB Owner's manual

Type
Owner's manual

This manual is also suitable for

Zeta FE-CB/D is a versatile fire detection system suitable for use in a variety of applications. Its key features include:

  • Conventional and addressable operation: The device can be used in both conventional and addressable fire alarm systems, providing flexibility and compatibility with various setups.
  • Remote LED: It has a remote LED that can be linked for common remote indication, allowing for clear and visible alarm signaling.
  • End-of-line monitoring: The device supports end-of-line monitoring, ensuring the integrity and reliability of the fire alarm circuit.
  • Simple installation: The Earth terminal provided on the device simplifies installation, although it is not required for the detector head's operation.

Zeta FE-CB/D is a versatile fire detection system suitable for use in a variety of applications. Its key features include:

  • Conventional and addressable operation: The device can be used in both conventional and addressable fire alarm systems, providing flexibility and compatibility with various setups.
  • Remote LED: It has a remote LED that can be linked for common remote indication, allowing for clear and visible alarm signaling.
  • End-of-line monitoring: The device supports end-of-line monitoring, ensuring the integrity and reliability of the fire alarm circuit.
  • Simple installation: The Earth terminal provided on the device simplifies installation, although it is not required for the detector head's operation.
Earth terminal is provided for easier installation. It is not required by the detector head.
Fyreye Common Base
Part Number: 45681-200GLT
Conventional schematic wiring diagram of detector circuit
ZETA Alarm Systems, Detection House, 72-78 Morfa Road, Hafod, Swansea, SA1 2EN, UK
Tel: (01792) 455175 Fax: (01792) 455176
Addressable schematic wiring diagram of detector circuit
Note: Polarity must be observed on detector as indicated on schematic wiring diagram.
Earth terminal is provided for easier installation. It is not required by the detector head.
From control panel
EARTH
L2
–R
EARTH
L2
–R
EARTH
L2
–R
End-of-line
device
Remote LED
+
L1 IN
L1OUT
L
1
IN
L1OUT
L1 IN
L1OUT
Link required for common remote
Positive line
in and out
Negative line
in and out
L2
L1 IN
39214-205/Draft B
EARTH
Earth terminal is provided for easier installation. It is not required by the detector head.
Fyreye Common Base
Part Number: 45681-200GLT
Conventional schematic wiring diagram of detector circuit
ZETA Alarm Systems, Detection House, 72-78 Morfa Road, Hafod, Swansea, SA1 2EN, UK
Tel: (01792) 455175 Fax: (01792) 455176
Addressable schematic wiring diagram of detector circuit
Note: Polarity must be observed on detector as indicated on schematic wiring diagram.
Earth terminal is provided for easier installation. It is not required by the detector head.
From control panel
EARTH
L2
–R
EARTH
L2
–R
EARTH
L2
–R
End-of-line
device
Remote LED
+
L1 IN
L1OUT
L
1
IN
L1OUT
L1 IN
L1OUT
Link required for common remote
Positive line
in and out
Negative line
in and out
L2
L1 IN
39214-205/Draft B
EARTH
Earth terminal is provided for easier installation. It is not required by the detector head.
Fyreye Common Base
Part Number: 45681-200GLT
Conventional schematic wiring diagram of detector circuit
ZETA Alarm Systems, Detection House, 72-78 Morfa Road, Hafod, Swansea, SA1 2EN, UK
Tel: (01792) 455175 Fax: (01792) 455176
Addressable schematic wiring diagram of detector circuit
Note: Polarity must be observed on detector as indicated on schematic wiring diagram.
Earth terminal is provided for easier installation. It is not required by the detector head.
From control panel
EARTH
L2
–R
EARTH
L2
–R
EARTH
L2
–R
End-of-line
device
Remote LED
+
L1 IN
L1OUT
L
1IN
L1OUT
L1 IN
L1OUT
Link required for common remote
Positive line
in and out
Negative line
in and out
L2
L1 IN
39214-205/Draft B
EARTH
Earth terminal is provided for easier installation. It is not required by the detector head.
Fyreye Common Base
Part Number: 45681-200GLT
Conventional schematic wiring diagram of detector circuit
ZETA Alarm Systems, Detection House, 72-78 Morfa Road, Hafod, Swansea, SA1 2EN, UK
Tel: (01792) 455175 Fax: (01792) 455176
Addressable schematic wiring diagram of detector circuit
Note: Polarity must be observed on detector as indicated on schematic wiring diagram.
Earth terminal is provided for easier installation. It is not required by the detector head.
From control panel
EARTH
L2
–R
EARTH
L2
–R
EARTH
L2
–R
End-of-line
device
Remote LED
+
L1 IN
L1OUT
L
1IN
L1OUT
L1 IN
L1OUT
Link required for common remote
Positive line
in and out
Negative line
in and out
L2
L1 IN
39214-205/Draft B
EARTH
  • Page 1 1

Zeta FE-CB Owner's manual

Type
Owner's manual
This manual is also suitable for

Zeta FE-CB/D is a versatile fire detection system suitable for use in a variety of applications. Its key features include:

  • Conventional and addressable operation: The device can be used in both conventional and addressable fire alarm systems, providing flexibility and compatibility with various setups.
  • Remote LED: It has a remote LED that can be linked for common remote indication, allowing for clear and visible alarm signaling.
  • End-of-line monitoring: The device supports end-of-line monitoring, ensuring the integrity and reliability of the fire alarm circuit.
  • Simple installation: The Earth terminal provided on the device simplifies installation, although it is not required for the detector head's operation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI