M10 Lockable Caster Wheels (Set of 4)
SKU: PT-DK-020C
Scan the QR code with your mobile device
or follow the link for helpful videos and
specications related to this product.
https://vivo-us.com/products/pt-dk-020c
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualied technician. Check
carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any
purpose that is not explicitly specied in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING!
LAST UPDATED: 04/07/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M
Chat live with an agent!
Screw each caster (A) into an M10 threaded hole in the base of the cart/
furniture. Use the wrench (A) to screw in and tighten the casters by turning the
locked nut at the bottom of the stem.
If leveling is required, use the wrench (T-A) to unscrew the caster(s) from the
base until all four sit flat on the floor. Tighten the leveling nut on the loosened
caster(s) against the base to secure the adjusted height.
PACKAGE CONTENTS
A (x4)
Wheel with Nut
and Washer
T-A (x1)
Wrench
A
T-A
/