2. Rugged Ridge
  3. 12034.22

Rugged Ridge 12034.22 Installation guide

  • I have reviewed the installation instructions for the Spartan Grille Grille Insert. This document outlines the steps for removing the old grille, installing the new insert, and reinstalling the grille. I am ready to answer your questions about this installation process.
  • What is included in the contents?
    What should be removed from the Spartan Grille before installing the graphic insert?
    What hardware is used to install the new grille insert?
Copyright © 2015 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
Page 1/2
Inserts for Spartan Grille
OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
CONTENTS:
• Grille Insert (1)
Rev - 03/2015
1. Remove Spartan Grille from vehicle. Refer to in-
structions included with grille for removal.
2. Remove highlighted M6 fasteners from rear of
Spartan Grille. They will be reused for installing the
graphical insert. Remove mesh insert.
Copyright © 2015 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
Page 2/2
Inserts for Spartan Grille
3. Install new grille insert using the M6 hardware from
the previous step.
4. Reinstall Spartan Grille. Refer to instructions includ-
ed with the grille for installation.
/