LoD Offroad Armor Lite Drop Step Installation guide

Brand
LoD Offroad
Model
Armor Lite Drop Step
Type
Installation guide

This manual is also suitable for

JAS1860 - REV 1 07/14/2020 Page 1
JEEP ARMOR LITE
DROP STEP PAIR
ARMOR LITE SERIES
*VERIFY YOU HAVE ALL THE COMPONENTS BEFORE STARTING THE INSTALLATION. REFER TO THE
ENGINEERING DRAWINGS AT THE END OF THIS DOCUMENT FOR A COMPLETE PARTS LIST*
WEB LINK: http://lodoffroad.com/assets/pdfs/JAS1860 Drop Step Pair.pdf
JK/JL/JT
JAS1860 - REV 1 07/14/2020 Page 2
Hang the Single Drop Step onto the backside of the Armor Lite Slider as
shown. Adjust the position of step forward or backward as needed.
Insert the Knob with Washer and T-Stud partially installed thru the back of the
step into the T-Slot on the back of the Armor Lite Slider.
Rotate the Knob 90° clockwise so that the shoulder on the stud catches on
the T-Slot as shown below. This will hold the T-Stud in place while tigtening.
Continue to tighten the Knob while pulling out on
the Knob at the same time.
JAS1860 - REV 1 07/14/2020 Page 3
**Maintenance**
• Periodically check and re-tighten all fasteners.
• Periodically check your Armor Lite Drop Steps for scratches or dings which
can happen over time or after heavy use or highway driving. It is important
to address these areas as soon as possible to prevent aking and corrosion
or rust from spreading. We recommend using Rustoleum© brand Black
Semi-Gloss Protective Enamel (oil based). Remove loose powder coating,
sand the area and clean using alcohol. Apply using a foam brush by dab-
bing to match the powder coat texture.
JAS1860 - REV 1 07/14/2020 Page 4
4
1352
ITEM NO.
PART NUMBER
DESCRIPTION
QTY.
1
4JAS1860-01
JEEP SINGLE DROP STEP
2
2
61125K86
KNOB, M08X1.25 THREADED HOLE
2
3
TB08125M25ZP
T-BOLT M08-1.25 X 25mm ZINC PLATE,
DROP IN
2
4
2JAS1860-04
SINGLE DROP STEP GRIP TAPE
2
5
FW3114ZP
FLAT WASHER Ø5/16" X .875" ZINC PLATE
4
N/A
JEEP DROP STEP PAIR
JAS1860
JAS1861
SHEET 1 OF 1
5/13/2020
MCH
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REV
DWG. NO.
DESCRIPTION:
NAME
DATE
MFG APPR.
ENG APPR.
CHECKED
DRAWN
SEE NOTES
FINISH:
MATERIAL:
DIMENSIONS ARE IN INCHES
TOLERANCES:
0.010
ANGULAR: MACH
1
TWO PLACE DECIMAL
0.015
THREE PLACE DECIMAL
0.005
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DRAWING IS THE SOLE
PROPERTY OF LOD LLC. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF LOD LLC IS
PROHIBITED.
LOD LLC.
A
SHEET SIZE: B
ECO:
-
NOTES:
JAS1860 = BARE STEEL
1.
JAS1861 = BLACK POWDER COAT
2.
JAS1860 - REV 1 07/14/2020 Page 5
JK/JL/JT Jeep
ARMOR LITE Series
DROP STEP PAIR
SHIPPING SHEET
Packaged by:
________________________
On:
________________________
JEEP DROP STEP
W/ GRIP TAPE
4JAS1860-01
(x2)
Instruction
Booklet
BOLT KIT
(may vary)
JAS1860 - REV 1 07/14/2020 Page 6
JK/JL/JT Jeep
ARMOR LITE Series
DROP STEP PAIR
BOLT KIT
Packaged by:
________________________
On:
________________________
DROP IN T-BOLT M8-1.25 X 40MM
(x2)
THREADED KNOB M8-1.25
(x2)
Standard Flat Washer Sizes
#10
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
5/16 X .875” FLAT WASHER
(x4)
Standard Flat Washer Sizes
#10
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
Standard Flat Washer Sizes
#10
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
Standard Flat Washer Sizes
#10
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

LoD Offroad Armor Lite Drop Step Installation guide

Brand
LoD Offroad
Model
Armor Lite Drop Step
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents