1of3
LightSourceToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Inner Backplate
x1
A
Package Contents
PARTS BAG
Fixture Body
x1
Inner Backplate Fixture Body Shade
Table of
Contents
STEP 1 STEP 3 STEP 4
Preparation: Identify and inspect all parts before beginning the installation.
Missing or damaged parts? Contact your original place of purchase.
Wiring
STEP 2
F
2BULBSREQUIRED
BULBSNOTINCLUDED
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
Outlet Box Screw
x2
C
Wire Connector
x3
D
Lock Screw
x2
B
E
Socket Collar
x2
GShade
x2
Bulb
STEP 5
Installation Instructions: UQL3492
www.urbanambiance.com
2of3
STEP 1
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 2
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3
Level
Gap
www.urbanambiance.com
3of3
STEP 4
STEP 5
www.urbanambiance.com
/
