2. urban ambiance
  3. UQL3815

urban ambiance UQL3815 Installation guide

  • Hello! I've reviewed the installation instructions for the UQL3815 light fixture. This document outlines the tools needed, safety precautions, and a step-by-step installation process, including wiring and shade assembly. I'm ready to answer your questions about setting up the fixture.
  • What type of bulb is required?
    How many bulbs are required?
    Are the bulbs included?
    What should I do if parts are missing or damaged?
1 of 3
Light SourceTools Required
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
3 BULB REQUIRED
BULB NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Package Contents
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x 1
E
Shade
x 3
F
Inner
Backplate
x 1
A
PARTS BAG
Mounting
Screw
x 2
B
Outlet Box Screw
x 2
CWire Connector
x 3
D
Table of
Contents Wiring Shade & Bulb
STEP 2 STEP 4
Fixture Body
STEP 3
Inner Backplate
STEP 1
Installation Instructions: UQL3815
www.urbanambiance.com
2 of 3
STEP 1
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 2
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3
www.urbanambiance.com
STEP 4
3 of 3
www.urbanambiance.com
/