Sonoff ZBMINI is a smart device with ZigBee wireless communication protocol that lets you remotely control lights and appliances, set schedules, create smart scenes, and control it with voice commands. You can also share control with family members and set up multiple devices to work together for a seamless smart home experience. It's compatible with various ZigBee hubs and platforms, including SONOFF ZigBee Bridge, SmartThings, Amazon Alexa, Hue, and others.
Sonoff ZBMINI is a smart device with ZigBee wireless communication protocol that lets you remotely control lights and appliances, set schedules, create smart scenes, and control it with voice commands. You can also share control with family members and set up multiple devices to work together for a seamless smart home experience. It's compatible with various ZigBee hubs and platforms, including SONOFF ZigBee Bridge, SmartThings, Amazon Alexa, Hue, and others.
SONOFF TECHNOLOGIES CO., LTD.
Power off
ON O FF
ON O FF
ON O FF
ON O FF
N In L Out S2
L In S1
N In
L In
N In
100-240V
AC
L
L1
L2
SPDT
L
L1
L2
SPDT
The device can be operated intelligently via working with the SONOFF ZigBee Bridge.
The device can work with other gateways supporting ZigBee 3.0 wireless
protocol. Detailed information is in accordance with the final product.
To avoid electric shocks, please consult the dealer or a qualified professional for
help when installing and repairing! Please do not touch the switch during use.
Wiring instruction
Make sure the neutral wire and live wire connection is correct.
S1/S2 can connect with the rocker light switch (the self-return rocker light switch
is not supported) or doesn't connect. To ensure safety, do not connect the neutral
wire and live wire to it.
English
Amazon Alexa
>
N In L Out S2
L In S1
N In
L In
N In
SONOFF TECHNOLOGIES CO., LTD. English
ZSS setup instruction
1. Download the latest Alexa App
2. Add Amazon Echo
3. Add device
After the device is powered onthe LED signal indicator flashes., wait 1-2 mins to fresh
the device list in Alexa App, and the added device will appear in the device list.
Please try to pair the device using eWeLink App if ZSS setup is failed.
The device will exit the pairing mode if no next operation for a long time. If enter
again, please long press the manual switch for 5s until the LED signal indicator
flashes and release.
1. Download APP
2.Add SONOFF ZigBee Bridge
3.Power on
N In L Out S2
L In S1
N In
L In
N In
4.Add sub-devices
>
SONOFF TECHNOLOGIES CO., LTD. English
eWeLink App pairing
eWeLink
eWeLink
Android™ & iOS
After powering on, the device will enter the pairing mode during the first use and the LED
signal indicator flashes.
The device will exit the pairing mode if no next operation for a long time. If enter
again, please long press the manual switch for 5s until the LED signal indicator
flashes and release.
Access eWeLink APP, select the Bridge that you want to connect, and tap “Add” to add
a sub-device, and be patient until the pairing completes.
Connecting
Kee p the d ev ice c los e
eno ugh t o th e hub .
25s
Add Devic e
Loo king f or dev ice
1 device s Found
ZBB ri dge
Add ed :0
No ch ild d evice ,plea se add .
Add
If the addition failed, move the sub-device closer to the Bridge and try again.
SONOFF ZigBee Bridge supports connecting
multiple sub-devices at the same time.
Connecting
Kee p the device cl os e
eno ugh t o th e hub .
Add Devic e
Loo king f or dev ice
3 device s Found
>
ZBB ri dge
Add ed :0
No ch ild d evice ,plea se add .
Add
Power the Bridge on, set the sub-device to the pairing mode. Then access the Bridge
page in the eWeLink APP to tap “Add”, and be patient until the pairing completes.
SONOFF TECHNOLOGIES CO., LTD. English
More APP application platforms and gateway
recommendations
Gateway adding instruction:
1. Refer to the gateway user manual to download the matched APP and get it paired.
2. Set ZBMINI to the pairing mode.
3. Add ZBMINI according to the prompt of APP. Please select eWeLink or SONOFF
when adding.
If the addition failed, move the sub-device closer to the Bridge and try again.
This device supports the following gateways besides SONOFF ZigBee:
Echo Studio
Echo Plus (model: ZE39KL)
2nd Gen Echo Show (model: DW84JL)
2nd Gen Echo Plus (model: L9D29R)
Samsung SmartThings hub
Amazon Alexa
SmartThings Hue
Philips Hue Smart Hub
Echo (4th Gen)
15s
Specifications
ZigBee
ZBMINI
100-240V AC 50/60Hz 10A Max
IEEE 802.15.4
-10~40℃
PC
42.6x42.6x20mm
100-240V AC 50/60Hz 10A Max
Model
Input
Output
Material
Dimension
Working temperature
Operating systems Android & iOS
N In L Out S 2
L In S1
N In
Product Introduction
Pairing button/Manual switch
LED signal indicator(Green)
On/Off LED indicator(red)
The device weight is less than 1 kg.
The installation height of less than 2 m is recommended.
Features
Above functions are determined by the connected ZigBee Hub.
Remote Control Single/Countdown
Timing
Voice Control Smart Scene Share Control
SONOFF TECHNOLOGIES CO., LTD. English
The is a smart device with ZigBee wireless communication protocol that allows you
to remotely turn on, schedule on/off and set smart scenes to trrigger other devices,
etc.
SONOFF TECHNOLOGIES CO., LTD. English
N In L Out S 2
L In S1
N In
Switch Network
If you need to change the network, long press the pairing button for 5s until the
ZigBee LED signal indicator flashes and release, then the device enters quick pairing
mode and you can pair again.
Deleting the device on the eWeLink app indicates you restore it to factory setting.
Factory Reset
FCC Radiation Exposure Statement:
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment.
Note:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum
distance20cm between the radiator & your body. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
SONOFF TECHNOLOGIES CO., LTD. FCC Warning
Shenzhen Sonoff Technologies Co., Ltd.
MADE IN CHINA
1001, BLDG8, Lianhua Industrial Park, shenzhen, GD, China
ZIP code: 518000 Website: sonoff.tech
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment
type ZBMINI is in compliance with Directive 2014/53/EU.The full text of the EU
declaration of conformity is available at the following internet address:
https://www.sonoff.tech/usermanuals
TX Frequency:
2405-2480MHz
RX Frequency:
2405-2480MHz
Output Power:
1.80dBm
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Sonoff ZBMINI is a smart device with ZigBee wireless communication protocol that lets you remotely control lights and appliances, set schedules, create smart scenes, and control it with voice commands. You can also share control with family members and set up multiple devices to work together for a seamless smart home experience. It's compatible with various ZigBee hubs and platforms, including SONOFF ZigBee Bridge, SmartThings, Amazon Alexa, Hue, and others.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sonoff S26R2ZB User manual
-
Sonoff SNZB-04 User manual
-
Sonoff SNZB-01 User manual
-
Sonoff L1-2M User manual
-
-
-
Sonoff ZB Bridge-P Smart Zigbee Bridge User manual
-
Sonoff NSPanel Pro User manual
-
Sonoff TX Ultimate User manual
-
Sonoff DW2-RF User manual
Other documents
-
Sunricher SR-ZGP2801KS User manual
-
MOES ZS-D-EUB-WH-MS User manual
-
Support Sonoff Mini R3 User manual
-
Amaze- Heater AH400USD User manual
-
MIGRO WiFi Smart Controller User guide
-
THIRD REALITY 3RTHS24BZ User manual
-
MIGRO 154 User manual
-
DeLOCK 11826 User manual
-
THIRD REALITY SMART PLUG User guide
-
