Rowlinson Softwood Adirondack Companion Seat Assembly Instructions

Brand
Rowlinson
Model
Softwood Adirondack Companion Seat
Type
Assembly Instructions
Assembly Instructions
Softwood Adirondack
Companion Seat English SS392B
Before assembly
• We recommend that time is taken to read
the instructions before starting assembly,
then follow the easy step by step guide.
The instruction sheet is only a guide to the
assembly. Certain items may not be shown
to scale.
• Check all components prior to assembly
• This product should be assembled by no less
than two people
• Drill all components where indicated
x 2 Drill
Recommended tools for assembly
• Power drill/screwdriver
• Crosshead screwdriver drill bit
• 3mm drill bit
• 13mm spanner
No. Components Qty.
1 Seat 2
2 Inner front leg 2
3 Outer front leg 2
4 Back support 4
5 Rear arm support 2
6 Rear brace 2
7 Seat back 2
8 Lower table 1
9 Upper table 1
10 Left outer arm 1
11 Right outer arm 1
12 Seat facia 2
No. Fixing Kit Qty.
13 60mm bolt 12
14 Washer 12
15 Nut 12
16 70mm screw 4
17 60mm screw 8
18 50mm screw 16
19 40mm screw 8
20 25mm screw 8
21 L-bracket 2
Biocidal Products Regulation EU 528/2012
Wolmanit® CX treated wood is a treated article
that incorporates biocidal products: copper
hydroxide carbonate/II/ and boric acid. They
protect wood against fungal decay /rot/ and
insect attack.
Keep away from food, drink and animal feeding
stuffs. Avoid breathing dust when cutting
treated wood.
1
2
1
3
1
1
1
7
1
4
1
6
1
8
1
10
1
9
1
11
1
5
1
12
1. Legs
3. Rear Braces
2. Back supports
LEFT SEAT RIGHT SEAT
No. Components for this section Qty.
1 Seat 2
2 Inner front leg 2
3 Outer front leg 2
12 Seat facia 2
Fixings for this section
19 40mm screw 8
13 60mm bolts 8
14 Washer 8
15 Nut 8
No. Components for this section Qty.
6 Rear brace 2
Fixings for this section
18 50mm screws 4
No. Components for this section Qty.
4 Back support 4
Fixings for this section
13 60mm bolts 4
14 Washer 4
15 Nut 4
LEFT SEAT
RIGHT SEAT
RIGHT SEAT
LEFT SEAT
1
1
1
4
1
4
1
6
1
6
1
4
1
4
1
1
1
2
1
3
1
3
1
2
1
1
1
12
Washer
Washer
Washer
Washer
Nut
Nut
Nut
Washer
Washer
50mm
2”
60mm
2 3
/8”
60mm
2 3
/8”
60mm
2 3
/8”
50mm
2”
50mm
2”
60mm
2 3
/8”
60mm
2 3
/8”
Washer
Washer
Nut
60mm
2 3
/8”
60mm
2 3
/8”
60mm
2 3
/8”
40mm
1 1
/2”
4. Lower centre table
LEFT SEAT
RIGHT SEAT
Important Note
For the purpose of seeing the
position of the screws, some seat
slats have been removed in the
drawing only. Do not attempt to
remove the seat slats.
5. Upper table
6. Rear arm supports
No. Components for this section Qty.
8 Lower table 1
Fixings for this section
16 70mm screw 4
No. Components for this section Qty.
9 Upper table 1
Fixings for this section
17 60mm screw 2
18 50mm screw 4
No. Components for this section Qty.
5 Rear arm support 2
Fixings for this section
18 50mm screws 4
1
9
1
8
1
5
1
5
70mm
2 3
/4”
70mm
2 3
/4”
60mm
2 3
/8”
60mm
2 3
/8”
50mm
2”
50mm
2”
50mm
2”
50mm
2”
Important information - retain for future reference
If in doubt of any aspect regarding the assembly, use or safety of your furniture please contact us:
Help Line: (Normal Office Hours) 01829 261 121
Email: support@rowgar.co.uk
ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle Nr. Nantwich
Cheshire
CW5 6BN
www.rowgar.co.uk
We constantly improve the quality of our products,
occasionally the components may differ from the
components shown and are only correct at time
of printing. We reserve the right to change the
specification of our products without prior notice.
2020 © Rowlinson Garden Products Ltd
Periodically check all fastenings for tightness
For domestic use only
IMPORTANT: RETAIN FOR FUTURE REFERENCE READ CAREFULLY
7. Seat backs
8. Outer arms
No. Components for this section Qty.
7 Seat back 2
Fixings for this section
17 60mm screw 4
18 50mm screw 4
No. Components for this section Qty.
10 Left outer arm 1
11 Right outer arm 1
Fixings for this section
17 60mm screw 2
20 25mm screw 8
21 L-bracket 2
Important Note
For the purpose of seeing the
position of the screws, some back
rest slats have been removed in
the drawing only. Do not attempt
to remove the back rest slats.
1
7
1
7
1
10
1
11
1
19
1
19
60mm
2 3
/8”
60mm
2 3
/8”
50mm
2”
50mm
2”
60mm
2 3
/8”
60mm
2 3
/8”
25mm
1”
25mm
1”
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Rowlinson Softwood Adirondack Companion Seat Assembly Instructions

Brand
Rowlinson
Model
Softwood Adirondack Companion Seat
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents