HORAGE OMNIUM GEN 2 40MM User manual

OMNIUM GEN 2 40MM
Brand
HORAGE
Model
OMNIUM GEN 2 40MM
Category
Watches
Type
User manual
OMNIUM GEN 2 40MM
USER MANUAL
2
Dear Customer,
Congratulation on your new OMNIUM GEN 2 40mm watch,
We hope you enjoy using it.
OMNIUM GEN 2 40MM
Movement-CMK1
USEFUL INFORMATION
3
OMNIUM GEN 2 40MM
Movement-CMK1
Attention: To avoid movement defects, generally, hands should be moved clockwise while
setting the time.
In order to guarantee the reliability of your HORAGE watch we recommend you to follow some
directions:
• Protect your watch from shocks and magnetic elds.
• The ne mechanism of your HORAGE watch should be examined and main tained from time to
time.
• We recommend a revision and examination regarding the water resistance every three years
(if often used in water, every two years). This should be done by an authorized HORAGE dealer.
• Your watch will appreciate it and an impeccable function will be guaranteed.
USEFUL INFORMATION
4
OMNIUM GEN 2 40MM
Movement-CMK1
• Only diving watches are suited for swimming and diving. Your watch has been tested regarding
the pressure indicated at the bottom of the case.
• Before use in water, it needs to be checked whether the crown is pushed to the winding up
position in order to guarantee water resistance.
• The indicated water resistance is only valid for newly manufactured watches. The water resist-
ance can be aected with time by shocks, chemical reactions with gasoline, adhesives, paint,
cleaning spray etc. and by frequent turning of the crown.
• The watch automatically winds up with the movement of the wearer.
• To put the watch into operation it needs to be wound up by 10 or 15 revolutions via the crown.
5
OMNIUM GEN 2 40MM
OVERVIEW
Hour Hand
Minute Hand
Central Seconds Hand
Power Reserve Indicator
Screw down crown
1
6
2
3
4
5
OMNIUM GEN 2 40MM
Movement-CMK1
1 2
3 4
5
7
OMNIUM GEN 2 40MM
Movement-CMK1
0
0
Power setting.
8
1 2
OMNIUM GEN 2 40MM
Movement-CMK1
Crown at 3 o’clock touching the case, the crown can be wound
forward to gain power.
0 1 2
9
1
Date setting.
OMNIUM GEN 2 40MM
Movement-CMK1
Pull the crown at 3 o’clock (rst notch): wind the crown forward
to set the date.
10
2Pull the crown at 3 o’clock (second notch): wind the crown
backward to set the time; the watch will start as soon as
the crown is pushed back in.
Time setting.
1 20
OMNIUM GEN 2 40MM
Movement-CMK1
MAINTENANCE
11
OMNIUM GEN 2 40MM
Movement-CMK1
Service can be performed by every experienced watchmaker.
Make sure that the seals are exchanged to keep water resistance intact
as well as lubrication is applied during this service.
It’s not a must but, your watch will like it and thank you with good
precision and extended lifetime.
OMNIUM GEN 2 40MM
Movement-CMK1
HORAGE SA Fuchsenried 10
2504 Biel/Bienne Switzerland
www.horage.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

HORAGE OMNIUM GEN 2 40MM User manual

OMNIUM GEN 2 40MM
Brand
HORAGE
Model
OMNIUM GEN 2 40MM
Category
Watches
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents