Entone Remote Quick start guide

Entone
Brand
Entone
Model
Remote
Category
LCD TVs
Type
Quick start guide
2
3
datastreamnep
datastreamnep
datastreamnep
remote Guide //
QUICK START
Manual Program Remote for Television
Auto Program Remote for Television
Program NEW Remote to Control STB
1. Visit www.nep.net/remote to download TV codes or locate your
TV type and make in the TV Codes pamphlet or pdf.
2. Turn on TV.
3. Hold down the TV button until it lights up and stays lit.
4. Type in a 4 digit code from the TV Codes pamphlet or pdf.
a. Test Volume - press volume up and down
b. Test Power - press Blue Power button at the top of remote
If either test fails go to next code in TV Codes pamphlet/pdf.
If HD codes do not work locate and test SD codes.
5. Once a working code is found hit the STB button to be sure you
can control the Set Top Box.
6. Write working code here for future access:
1. Turn on TV.
2. Hold down the TV button until it lights up and stays lit.
3. Press the Blue Power button once aiming the remote at TV.
4. Press either the Channel Up or Channel Down to start Auto Scan.
5. Auto Scan will test a Code in 5 second intervals. The TV button
will blink everytime a new code is tested. This can take up to
15 minutes to complete.
6. If / When the TV turns off press the OK button on the remote to
lock in the code.
If all codes have been tested and the OK button was not pressed
the TV key will blink 7 times and Auto Scan will be terminated.
1. Program Remote for TV rst. See options above.
2. Hold down the STB button until it lights up and stays lit.
3. Press the Blue Power button once aiming the remote at the
Set Top Box.
4. Press the Number 1 button. Remote will be programed to work
that Set Top Box.
www.nep.net
3
2
4
4
6
5
3
4
datastreamnep
datastreamnep
datastreamnep
remote Guide //
www.nep.net
DEVICE SELECTION
Press to control
your TV, STB, or
Auxiliary Device
PLAYBACK CONTROLS
Control playback of
DVD or DVR
DVR & LIVE TV
Press DVR to use
the DVR functions,
and press LIVE TV to
return to live TV from
viewing a recording
ASPECT RATIO SETTINGS
Change TV’s aspect
ratio or switch from
SD to HD
OK
Enter a choice you
have selected
BACK
Return to the previous
selection / screen
VOL + / -
Adjust volume
MUTE
Toggle audio on/off
NUMBER PAD
Enter a channel
number or PIN
INPUT
Choose between TV
connections
POWER
Turn a selected device
on or off
RECORD
Begin recording
CALLER ID
Press for On Screen
Caller ID Log
VUDU
Press to activate Vudu
Movies & Apps
MENU
Display main menu
INFO
Display information
about the current
program
ARROW KEYS
Move the highlight in
menu screens
EXIT
Exit current menu
GUIDE
Display the guide
CH/PG UP/DOWN
Change the channel
or move guide up or
down an entire page
LAST
Return to the previous
channel
CC
Toggles Closed
Captioning on/off
Entone Remote Overview
QUICK START
  • Page 1 1
  • Page 2 2

Entone Remote Quick start guide

Entone
Brand
Entone
Model
Remote
Category
LCD TVs
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents