2. Intermec
  3. EasyCoder 3400e
EasyCoder 3400e

Intermec EasyCoder 3400e, EasyCoder 4420, EasyCoder 4440 Install Manual

  • Hello! I am an AI chatbot trained to assist you with the Intermec EasyCoder 3400e Install Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How many different cutter trays can be used with the Intermec EasyCoder 4420 printer?
    How do I attach the basic cutter tray to the printer?
    How do I adjust the angle of the deluxe cutter tray?
    How do I make sure that the top of the tray rests against the cutter cover?
    What is the part number for the 3400 adapter that is used with the deluxe cutter tray on a 3400 printer?
067548-001
3400, 4420, and 4440 Cutter Tray Instruction Sheet
You can use two different cutter trays to collect cut labels from your 3400, 4420,
and 4440 printers:
• The basic cutter tray (Part No. 067324)
• The deluxe cutter tray (Part No. 066369)
Both trays hook easily onto the cutter. On the deluxe cutter tray, you can adjust
the angle of the tray and the depth of the tray to match the amount of labels
you plan to cut.
To attach the basic cutter tray
1. Attach the cutter to your printer. For help, see the 3400, 4420, and 4440
Cutter User’s Manual (Part No. 066391).
2. Slide the tray arms under the mounting plate hinges and hook the tray arms
onto the hinges. The tray rests against the front of the printer.
Feed/Pause
Power/Data
Alert
Empty/Pause
IntermecIntermec
4420
Cutter
cover
44XXT.002
Basic
tray
Mounting
plate hinge
3400, 4420, and 4440 Cutter Tray Instruction Sheet
To attach the deluxe cutter tray
Note: Depending on the angle of the tray, it may hang down below the bottom of the
printer. If you want the tray to rest at a steep angle, move your printer so that the front
is at the edge of the surface it is sitting on.
1. Attach the cutter to your printer. For help, see the 3400, 4420, and 4440
Cutter User’s Manual (Part No. 066391).
2. Loosen the base thumbscrew, slide the base up or down to the position you
want, and tighten the base thumbscrew.
3. If you have a 3400 printer, attach the 3400 adapter to the back of the tray
with the two Phillips screws that came with the adapter.
44XXT.003
3400
Adapter
Screw (2)
Thumbscrew
4. Loosen the eight thumbscrews on the sides of the tray so that you can adjust
the angle of the tray as you hang it.
5. Hang the deluxe tray on the mounting plate hinges.
067548-001
Attaching the Deluxe Cutter Tray
Feed/Pause
Power/Data
Alert
Empty/Pause
IntermecIntermec
4420
Cutter
cover
44XXT.001
Deluxe
tray
Tray base
Thumbscrew
Base
thumbscrew
6. Making sure that the top of the tray rests against the cutter cover, adjust the
tray to the angle you choose.
7. Tighten the thumbscrews to secure the angle of the tray.
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
© 1998 Intermec
All Rights Reserved
P/N 067548-001
/