LifeProof H5040-4004-1200-AB Installation guide

NAME: Tayton STYLE NO. H5040 DATE 7/10/2015

Pattern Repeat: Random Match

SIDE SEAMS

On the other edge find and separate a row using a row finder then use a cushion back cutter to cut along the seperated row.

CROSS SEAMS

width of carpet, then using the cushion back cutter cut along the seperated row,holding the cutter on a slight angle to under

cut the face fibers.

On the other edge ,hold the cutter straight up and down, then pull both pieces togeather and check seam fit, if satisfied with

fit, apply seam sealer to both edges and let dry.

Select the carpet edge with the pile laying towards the seam, then use a row finder to separate a row across the

Use a premium quality seam tape to seam together, follow by rolling seam with seam roller and seam weight.

Allow seam to completely cool before stretching.

Best seam quality is to cut carpet from face.

Use a row finder to find and separate a row down the length of seam, use a cushion back cutter cut along the seperated row.

Allow seam to completely cool before stretching.

Pull both pieces together and check seam for proper fit and, if satisfied with fit apply seam sealer and allow to dry.

Using a premium seaming tape, seam pieces together and follow by rolling seam with a round wheel roller.

Use a seam weight to hold seam flat while cooling off, no heavier than 10 lbs.

width of carpet, then using the cushion back cutter cut along the seperated row,holding the cutter on a slight angle to under

cut the face fibers.

On the other edge ,hold the cutter straight up and down, then pull both pieces togeather and check seam fit, if satisfied with

fit, apply seam sealer to both edges and let dry.

Select the carpet edge with the pile laying towards the seam, then use a row finder to separate a row across the

Use a premium quality seam tape to seam together, follow by rolling seam with seam roller and seam weight.

Allow seam to completely cool before stretching.

Best seam quality is to cut carpet from face.

Use a row finder to find and separate a row down the length of seam, use a cushion back cutter cut along the seperated row.

Allow seam to completely cool before stretching.

Pull both pieces together and check seam for proper fit and, if satisfied with fit apply seam sealer and allow to dry.

Using a premium seaming tape, seam pieces together and follow by rolling seam with a round wheel roller.

Use a seam weight to hold seam flat while cooling off, no heavier than 10 lbs.

This manual is also suitable for

Download PDF