A x 2 Base Plate
B x 1 Hanger Bar
C x 2 Base Bars
D x 2 Vertical Bars
E x 2 Vertical Bars
Nested inside Vertical Bars (D) when shipped
F x 2 Extenders
Nested inside
Hanger Bar (B) when shipped
G x 2 T-Connectors
H x 4 Casters
I x 2 Vertical Connectors
J x 2 Caps
1. Insert Base Bars (C) into Base Plate (A). Push firmly to secure.
2. Place assembled base onto the floor and insert Vertical
Bars (D) into the holes at the top. Push firmly to secure.
Attach Vertical Connectors (I) to the top of each Vertical Bar.
3. Assemble the top portion by inserting Hanger Bar (B) into
sides of the T-connectors (G). Insert the Extenders (F)
into the opposite side of the T-connectors (G). Finish the top
portion by inserting Caps (J) and pushing them firmly into
each end of the Top Extenders (F).
4. Unlock the Vertical Connectors (I) by pulling the tabs outward.
Slide the completed top portion into the Vertical Bars (D).
5. Lay rack on its side. Insert casters (H) into the Base Plates (A).
6. Unlock the Hanger Bar (B) by pulling tabs outward. Slide Top
Extenders (F) into the sides of the unlocked Hanger Bar (B).
7. Adjust height and width by pulling and locking Bars (E & F)
into the desired location.
expandable
GARMENT RACK
PARTS LIST: ASSEMBLY INSTRUCTIONS:
ASSEMBLY INSTRUCTIONS:
Convenient and stylish
solution for your
garments and shoes
Printed in China
For customer support, please visit www.mscustomercare.com or call 1-800-374-2744.
J
F
G
B
E
I
D
A
H
C
Please read prior to use. This adjustable height garment rack
is designed for indoor use only. Do not overload: weight capacity
of up to 30lbs. To prevent tipping, evenly distribute weight. Keep
away from heat sources such as heaters and fireplaces.
IMPORTANT!
• Keep out of reach of children, this item is not a toy.
• To avoid a tipping hazard never hang or climb on this item.
• Do not use the product for anything other than its intended purpose.
• If this product appears cracked or broken in any way, discontinue use
and discard immediately.
11” x 8.5” (27.94cm x 21.59)