Order Home Collection 3328041 Installation guide

Type
Installation guide
C
A
L
K
H
D
E
Step 4:
Attach Hanging Rod C and Hooks K to Side Frame B
Step 5:
Rest Shelf Boards D on Shelf Support Frame E
Step 6:
Product is fully assembled
ASSEMBLY INSTRUCTIONS: ASSEMBLY INSTRUCTIONS:
Printed in China
For customer support, please visit www.mscustomercare.com or call 1-800-374-2744.
Printed in China
For customer support, please visit www.mscustomercare.com or call 1-800-374-2744.
Please read prior to use. This garment rack is designed
for indoor use only. Do not overload: weight capacity of
up to 30lbs for the hanging rod, 30lbs per shelf and 5lbs
per steel hook. To prevent tipping, evenly distribute weight.
Keep away from heat sources such as heaters and fireplaces.
IMPORTANT!
• Keep out of reach of children, this item is not a toy.
To avoid a tipping hazard never hang or climb on this item.
• Do not use the product for anything other than its intended purpose.
• If this product appears cracked or broken in any way, discontinue use
and discard immediately.
metal rolling
GARMENT RACK
Step 1:
Attach Casters F & G to the bottom of frame B
Step 2:
Attach Shelf Support Frame E to frame B. Make sure
the Support Frame is placed as shown in the
diagram.
Ax2
Top
Side Tube
Bx2
Bottom
Side Frame
Cx1
Hanging Rod
Dx2
Shelf Board
Ex2
Shelf Support
Frame
Fx2
Caster
Gx2
Caster with
brake
Hx6
Screw
Ix8
Screw
Jx4
Screw Nut
Kx2
Hook
Lx1
Allen Key
Mx1
Wrench
*Phillips head screwdriver is needed but not included.
B
F
G
B
L
I
E
B
A
H
M
J
L
Step 3:
Fix Top Side Tube A
to Side Frame B
PARTS LIST:
ASSEMBLY INSTRUCTIONS:
ASSEMBLY INSTRUCTIONS:
Convenient and stylish
solution for your
garments and shoes
11” x 8.5” (27.94cm x 21.59)
  • Page 1 1

Order Home Collection 3328041 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI