Troy-Bilt 12AVB26N211 Fast Start Guide

Troy-Bilt
Brand
Troy-Bilt
Model
12AVB26N211
Type
Fast Start Guide

This manual is also suitable for

Troy-Bilt 12AVB26N211, a powerful machine, offers efficient lawn care solutions with its 21" cutting deck and reliable Briggs & Stratton engine. Ideal for medium-sized yards, it features 6 cutting height adjustments, allowing you to achieve your desired lawn appearance. With its user-friendly design, the 12AVB26N211 ensures a comfortable mowing experience.

Troy-Bilt 12AVB26N211, a powerful machine, offers efficient lawn care solutions with its 21" cutting deck and reliable Briggs & Stratton engine. Ideal for medium-sized yards, it features 6 cutting height adjustments, allowing you to achieve your desired lawn appearance. With its user-friendly design, the 12AVB26N211 ensures a comfortable mowing experience.

Hold blade control handle against upper handle. A.
Slowly pull starter rope handle from engine and B.
slip starter rope into the rope guide.
Tighten rope guide wing knob.C.
Use cable tie to secure cables to lower handle.D.
Remove the wing nuts and carriage bolts A.
securing the upper handle to the lower
handle.
Form No. 778-11920© 2010 12AVB26
Pull upward on the
handle until the holes
in lower handle line up
with the holes
in the handle bracket.
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
Starter
Rope Handle
Blade Control Handle
Wing Nuts
T-Bolt
A
Pivot the upper handle
upward.
Remove T-bolts from B.
the handle brackets.
A
B
B
Insert the T-bolts removed in Step 1B A.
through the handle brackets to secure
the handle in place.
A
B
C
D
Secure upper handle B.
to lower handle with
wing nuts (on outside)
and carriage bolts
removed Step 1A.
A
B
1
4
2
5
3
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Form No. 778-11920 © 2010 12AVB26
Oil Fill /
Dipstick
Gas Fill
Fill fuel tank with clean, fresh gasoline. Do not
fill above the base of fuel tank neck.
Pour the entire contents of the oil bottle (supplied)
into the oil fill. Check the oil level using the
dipstick. (Refer to the Operator’s Manual)
While standing behind the machine, pivot the Blade
Control Handle against the upper handle.
Grasp the starter rope handle and pull with quick,
full-arm stroke. If the engine does not start after three
pulls, wait a few minutes and repeat.
6
8
7
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 12AVB26N211 Fast Start Guide

Troy-Bilt
Brand
Troy-Bilt
Model
12AVB26N211
Type
Fast Start Guide
This manual is also suitable for

Troy-Bilt 12AVB26N211, a powerful machine, offers efficient lawn care solutions with its 21" cutting deck and reliable Briggs & Stratton engine. Ideal for medium-sized yards, it features 6 cutting height adjustments, allowing you to achieve your desired lawn appearance. With its user-friendly design, the 12AVB26N211 ensures a comfortable mowing experience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents