Evo J Box Owner's manual

Type
Owner's manual

This manual is also suitable for

Evo J Box: A Handy Tool for Efficient Pool and Spa Heating

Evo J Box is a device designed to facilitate efficient heating of pools and spas. It enables a seamless connection between the heat pump, water pump, and power supply. With its user-friendly design, the Evo J Box simplifies the installation process, making it an ideal choice for both professionals and DIY enthusiasts. It ensures a secure and reliable connection between the electrical components of your pool or spa heating system.

Evo J Box: A Handy Tool for Efficient Pool and Spa Heating

Evo J Box is a device designed to facilitate efficient heating of pools and spas. It enables a seamless connection between the heat pump, water pump, and power supply. With its user-friendly design, the Evo J Box simplifies the installation process, making it an ideal choice for both professionals and DIY enthusiasts. It ensures a secure and reliable connection between the electrical components of your pool or spa heating system.

JBOX INSTALL GUIDE
EVOHEAT JBOX SCHEMATIC
NOTES:
CONNECT ACTIVE TO UNIT ACTIVE
CONNECT PUMP TO PUMP TERMINAL 1
CONNECT NEUTRAL TO PUMP TERMINAL 2
NOTE: heat pump, Jbox and water pump all on the same circuit
EVOHEAT ELECTRICAL CONNECTION
IMPORTANT: A licensed electrician must read the information in this manual before commencing
Ensure power is disconnected from all equipment during installation or service
Always comply with the national and local electrical codes and standards
IMPORTANT: Ensure electrical cable size is adequate for requirements at the installation location. The
Heat pump may come supplied with a 10amp or 15 amp plug. When wiring up the J-Box to the heater you
will need to take into account the total draw from the heat pump and water pump. You may need to
remove the 10/15amp plug and hardwire into a larger circuit for the heat pump and water pump.
EVOHEAT JBOX WIRING CONNECTIONS
Wire up heat pump to mains power at L,N, and Earth on the Mains input terminals on heat pump as per image below.
Wire up EvoHeat JBox connections as per JBox image below. L terminal on the heat pump should have 2 cables
connected (1 to power supply and 1 to the JBox).
Connect 1 (water pump active) to the location on JBox shown below (right hand side of small terminal block)
Connect 2 (water pump neutral) on the heat pump terminal block to the blue terminal strip on the JBox
Connect earth terminals from both units
EVO INDUSTRIES AUSTRALIA PTY LTD
P: 1300 859 933 FAX: 07 3376 2669
www.evoheat.com.au
JBOX WARRANTY
For further peace of mind the EvoHeat JBox comes with a 1 year warranty.
1
YEAR
WARRANTY
THE SPECIALISTS IN POOL AND SPA HEATING
EvoHeat are 100% Australian owned and operated company and are the industry specialists in pool
and spa heat pumps. For over a decade we’ve been building a solid reputation for pool and spa
heating products that are renowned for reducing your energy bills and delivering reliability.
Our exclusive pool heaters are durable and utilise cutting edge components sourced from leading
brand manufacturers around the world. Unlike other suppliers, EvoHeat only specialise in heat
pump technology and are constantly developing and improving our heating applications to ensure
we offer you the best in the market.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Evo J Box Owner's manual

Type
Owner's manual
This manual is also suitable for

Evo J Box: A Handy Tool for Efficient Pool and Spa Heating

Evo J Box is a device designed to facilitate efficient heating of pools and spas. It enables a seamless connection between the heat pump, water pump, and power supply. With its user-friendly design, the Evo J Box simplifies the installation process, making it an ideal choice for both professionals and DIY enthusiasts. It ensures a secure and reliable connection between the electrical components of your pool or spa heating system.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI