Traxxas VXL-3s Speed Control Operating instructions

VXL-3s Speed Control
Traxxas
Brand
Traxxas
Model
VXL-3s Speed Control
Type
Operating instructions

The Traxxas VXL-3s Speed Control is a versatile and powerful brushless speed control system designed for 1/10-scale and 1/16-scale RC vehicles. It features multiple drive profiles, including Sport, Race, and Training modes, to suit different driving styles and skill levels. Additionally, it has a built-in telemetry system that allows users to monitor various data points, such as speed, battery voltage, and RPM, in real-time. Furthermore, the VXL-3s Speed Control is waterproof and dustproof, making it suitable for use in various weather conditions.

The Traxxas VXL-3s Speed Control is a versatile and powerful brushless speed control system designed for 1/10-scale and 1/16-scale RC vehicles. It features multiple drive profiles, including Sport, Race, and Training modes, to suit different driving styles and skill levels. Additionally, it has a built-in telemetry system that allows users to monitor various data points, such as speed, battery voltage, and RPM, in real-time. Furthermore, the VXL-3s Speed Control is waterproof and dustproof, making it suitable for use in various weather conditions.

TRAXXAS.com
Traxxas, 1100 Klein Road, Plano, TX 75074,
Phone: 972-265-8000, Fax: 972-265-8011, e-mail: [email protected]
Covers Part #3725X
VXL-3s Battery Expansion Kit
KC1837-R00 Rev. 130522
Stampede VXL Installation Rustler VXL / Bandit VXL Installation
This kit will allow Traxxas Rustler VXL, Bandit VXL, and Stampede VXL to
accept batteries up to 5.4 x 1.8 x 1.67” (138 x 46 x 42.5 mm).
If you have questions or need technical assistance, call Traxxas at
1-888-TRAXXAS
(1-888-872-9927) (U.S. residents only)
3725
ESC mount
(not included in kit)
3725
ESC mount
(not included in kit)
3x25 BCS
3x25 BCS
Spacers
Spacers
Foam Pad*
Foam Pad*
(not included in kit)
(not included in kit)
1834
Body Clip
1834
Body Clip
3627X
Battery Bar
3727A
Battery Bar
3627X
Hold-Down
(not included in kit)
Typical 3S/ 8000+ mAh LiPo packs (Stampede)
This kit requires a Stampede equipped with the new hold-down
part #3627X. If your Stampede is equipped with the old hold-
down part #3627A or #3627, it will need to be replaced with part
#3627X to install this kit.
Battery Post SetupNote to Stampede Owners:
Typical 3S/ 8000+ mAh LiPo packs (Rustler/Bandit)
Typical 2S LiPo and standard NiMH packs
Note: May not accommodate all batteries from all
manufacturers. Confirm fit before buying batteries.
Battery
Posts
Battery
Posts
1834
Body Clip
1834
Body Clip
*Depending on the height of the battery used, it
may be required to place the supplied foam pad
between the battery and the ESC mount. This will
help secure the battery during vehicle operation.
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Traxxas VXL-3s Speed Control Operating instructions

VXL-3s Speed Control
Traxxas
Brand
Traxxas
Model
VXL-3s Speed Control
Type
Operating instructions

The Traxxas VXL-3s Speed Control is a versatile and powerful brushless speed control system designed for 1/10-scale and 1/16-scale RC vehicles. It features multiple drive profiles, including Sport, Race, and Training modes, to suit different driving styles and skill levels. Additionally, it has a built-in telemetry system that allows users to monitor various data points, such as speed, battery voltage, and RPM, in real-time. Furthermore, the VXL-3s Speed Control is waterproof and dustproof, making it suitable for use in various weather conditions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents