John Deere LP22704 Installation guide

Type
Installation guide

This manual is also suitable for

Technical Manual
John Deere
Riding Mower/Gator
Seat Cover
Protects new seats -
renews old seats
Specifications
Fabric: 300D Polyester
Color: Yellow & Black or Hardwoods
Made in China
Size: Part #: Fit:
Small LP22704 (black) Small fits back rests up to 11”
14.5” Seat Length x 19” Seat Width x 11.5” Seat Back Height x 4.5” Seat Side Height
Medium 92324 (Black) & 92323 (Hardwoods) Medium fits back rests up to 15”
16.25” Seat Length x 19” Seat Width x 14.25” Seat Back Height x 4.5” Seat Side Height
Large 92334 (Black) & 92333 (Hardwoods) Large fits back rests up to 18”
16.25” Seat Length x 19” Seat Width x 17” Seat Back Height x 4.5” Seat Side Height
Cushioned seat for extra comfort
Four convenient pockets keep tools and gear within reach
Central water drain hole keeps water from pooling
Elastic cord at hem for a custom fit
Installation
Take your seat cover out of its stuff sack. Your seat cover has storage pockets on the back of
the cover. This side faces back.
Pull the seat cover over the seat back. Then pull the rest of the cover over the seat front.
Cleaning and Care
Clean your cover with a soft brush and luke-warm water or machine wash in COLD water. DO NOT
USE SOAP as it may remove the protective coatings added by the factory. Dry on air or delicate.
Storage
A handy storage bag is provided to store you cover in. To avoid any possibility of mildew be sure
your cover is completely dry before you store it in the storage bag for a long period.
Two year warranty
This cover is factory warranted for workmanship and materials for two years after purchase.
92324 02.02.10
Technical Features & Advantages
  • Page 1 1

John Deere LP22704 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI