Technical Manual
John Deere
EZtrak Cover
Specifications
Fabric: 300D Polyester
Color: Black
Made in China
Size: Part #: Fit:
81”L x 44”W @ back x 47.5”H 98107 EZtrak Riding Mowers
• Protects against sun damage, rain, dirt, birds and tree sap
• Handy storage pocket reverses to attractive stuff case
• Side handles for easy fitting and removal
• Elastic cord at bottom for easy fitting
• Dual air vents let air circulate and help prevent ballooning in wind
Fitting
Your cover will fit all EZtrak riding mowers. It may not cover some accessories such as
grass catchers or mulchers.
Installation
Check your mower for sharp corners or edges that could stress your cover as you pull it
on.
Look for a white tag sewn in the bottom hem that says “front”. Slip your cover over the top
of your mower with the white tag at the front, then pull the cover down on all four corners.
Cleaning and Care
Clean your cover with a soft brush and luke-warm water or machine wash in COLD water.
DO NOT USE SOAP as it may remove the protective coatings added by the factory. Dry on
air or delicate.
Storage
A handy integrated storage bag is sewn into your cover. Just stuff your cover into it. To
avoid mildew be sure your cover is completely dry before you store it in the storage bag
for a long period.
Two Year Warranty
This cover is factory warranted for workmanship and materials for two years after
purchase. This warranty assumes normal use and conditions. Use while trailering your
mower will invalidate the warranty.
98107 10.10.06
Technical Features & Advantages
/
