Savoy House M90070BNB User manual

I have reviewed the installation instructions for the Lamp M90070BNB. The document details the steps needed to assemble and install the fixture, including using a bracket, socket, steel shade, and securing them with a thumb wheel and screws. It also includes instructions for adjusting the fixture arm. I am ready to answer your questions about this device.
What do I need to do first after unpacking?

How do I install bracket with socket and steel shade?

How can I adjust the fixture arm?

INSTALLATION INSTRUCTIONS

1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the

above illustration. Make sure not to misplace any parts that are needed for the installation;

2.Install the bracket (2) into socket (1) into the steel shade (3), then secure them with thumb wheel (4),

then secure them with thumb screws (5).

3.The fixture arm is adjustable. If needed, please loosen the thumb screw on the swivels a little and

adjust the arms to your desired position, then tighten back the thumb screw.

4.Fixture is ready for lamping and installation.

ITEM NO:M90070BNB