2. Toro
  3. Auger Head, TX 413 Compact Utility Loader

Toro Auger Head, TX 413 Compact Utility Loader, Auger Head, TX 413 Compact Utility Loaders User manual

  • Hello! I am an AI chatbot trained to assist you with the Toro Auger Head, TX 413 Compact Utility Loader User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3353-818RevB
AugerDriveHead
forTX413CompactUtilityLoaders
ModelNo.22804—SerialNo.270000001andUp
Registeratwww.Toro.com.OriginalInstructions(EN)
Theremaybeburiedpower,gas,and/or
telephonelinesintheworkarea.Shockor
explosionmayoccurifyoudigintothem.
Havethepropertyorworkareamarkedfor
buriedlinesanddonotdiginmarkedareas.
Contactyourlocalmarkingserviceorutility
companytohavethepropertymarked(for
example,intheUnitedStates,call811forthe
nationwidemarkingservice).
Introduction
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoidinjury
andproductdamage.Youareresponsibleforoperating
theproductproperlyandsafely.
YoumaycontactTorodirectlyatwww.Toro.comfor
productandaccessoryinformation,helpndinga
dealer,ortoregisteryourproduct.
Wheneveryouneedservice,genuineToroparts,or
additionalinformation,contactanAuthorizedService
DealerorToroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.Themodel
andserialnumbersareprintedonaplateontheauger
drivehead.Onaugersandextensions,themodeland
serialnumberplateislocatedontheupperportionof
theshaft.Writethenumbersinthespaceprovided.
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafetyalertsymbol
(Figure1),whichsignalsahazardthatmaycauseserious
injuryordeathifyoudonotfollowtherecommended
precautions.
Figure1
1.Safetyalertsymbol
Thismanualuses2otherwordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Contents
Introduction.................................................................2
Safety...........................................................................3
StabilityRatings....................................................3
SafetyandInstructionalDecals.............................4
Operation.....................................................................4
OperationalSpecications....................................4
InstallinganAuger...............................................4
DiggingaHole.....................................................5
RemovinganAuger..............................................6
Maintenance.................................................................7
RecommendedMaintenanceSchedule(s)..................7
GreasingtheCradleArmPivotPoints...................7
Storage.........................................................................7
Troubleshooting...........................................................8
©2007—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA.
AllRightsReserved
Safety
Improperuseormaintenancebytheoperatoror
ownercanresultininjury.Toreducethepotential
forinjury,complywiththesesafetyinstructionsand
thoseinthetractionunit
Operator’ s Man ual
.Always
payattentiontothesafetyalertsymbol,which
means
Caution
,
W ar ning
,or
Danger
—personal
safetyinstruction.Failuretocomplywiththe
instructionmayresultinpersonalinjuryordeath.
Contactwithamovingaugercancause
entanglement,severewounds,and/ordeath.
Keepallothersatleast10feetawayfromthe
augerduringoperation.Also,donotreplace
thesuppliedboltwhichsecurestheaugerto
thedriveheadwithalongerboltasthismay
increasethechanceforentanglement.
Theremaybeburiedpower,gas,and/or
telephonelinesintheworkarea.Shockor
explosionmayoccurifyoudigintothem.
Havethepropertyorworkareamarkedfor
buriedlinesanddonotdiginmarkedareas.
Contactyourlocalmarkingserviceorutility
companytohavethepropertymarked(for
example,intheUnitedStates,call811forthe
nationwidemarkingservice).
Whengoingupordownhill,themachinecould
overturniftheheavyendistowardthedownhill
side.Someonemaybepinnedorseriously
injuredbythemachineifitoverturns.
Operateupanddownslopeswiththeheavyend
ofthemachineuphill.Anattachedaugerbit
willmakethefrontendheavy.
Whentheengineisoff,attachmentsinthe
raisedpositioncangraduallylower.Someone
nearbymaybepinnedorinjuredbythe
attachmentasitlowers.
Alwayslowertheattachmentlifteachtimeyou
shutoffthetractionunit.
StabilityRatings
Todeterminethedegreeofslopeyoucantraversewith
theaugerinstalledonatractionunit,ndthestability
ratingforthehillpositionyouwanttotravelinthe
appropriatetablebelow ,thenndthedegreeofslope
forthesameratingandhillpositionintheStabilityData
sectionofthetractionunitOperator’sManual.
Exceedingthemaximumrecommendedslope
cancausethetractionunittotip,crushingyou
orbystanders.
Donotdrivethetractionunitonaslopesteeper
thanthemaximumrecommendedslope,as
determinedinthefollowingtablesandthe
tractionunit
Operator’ s Man ual
.
Stabilitywitha12to24inch(30to61
cm)Auger
OrientationStabilityRating
FrontUphill
C
RearUphill
D
SideUphill
D
3
StabilityWithoutanAugerorwithan
AugerSmallerthan12inches(30cm)
OrientationStabilityRating
FrontUphill
C
RearUphill
C
SideUphill
C
SafetyandInstructional
Decals
Safetydecalsandinstructionsareeasily
visibletotheoperatorandarelocated
nearanyareaofpotentialdanger.
Replaceanydecalthatisdamagedor
lost.
105-0326
1.Warning—readtheOperator’sManual.
2.Entanglementhazard,auger—keepbystandersasafe
distancefromtheauger.
3.Explosionand/orelectricshockhazard—donotdiginareas
withburiedgasorpowerlines.
Operation
RefertoyourtractionunitOperator’sManualformore
informationoninstallingandremovingattachments
onyourtractionunit.
Note:Alwaysusethetractionunittoliftandmovethe
attachment.Tomoveanaugerwithoutthedrivehead,
slingastrapovereachendoftheaugerandhoistitto
thedesiredlocation.
OperationalSpecications
Note:Specicationsanddesignaresubjecttochange
withoutnotice.
Width
24inches(61cm)
Length
15inches(38cm)
Height
23inches(58cm)
Weight(withoutauger)135lb(61Kg)
MaximumAugerDiameter
24inches(61cm)
InstallinganAuger
Theaugerheadswingsfreelyinthecradlearms.
Yourhandsorngerscouldgetpinchedand
severelyinjuredoramputatediftheyarecaught
betweenthecradlearmsandtheswingingdrive
head.
Keepyourhandsandngersawayfromthe
cradlearms.
1.Raisetheloaderarmssothedriveheadclearsthe
ground.
2.Stoptheengine.
3.Manuallyrotatetheaugerdriveheadup,until
youcanslideabolt(1/2x2-3/4inches)intothe
holeinthecradlearm,securingthedrivehead.
Lightlysecuretheboltwithaangenut(1/2inch)
(Figure2).
4
Figure2
1.Drivehead
3.Boltandangenut
2.Cradlearm
4.Ifusinganextensionwiththeauger,insertthe
endoftheextensionintotheendoftheaugerand
securetheaugertotheextensionwithabolt(7/8x
4-1/2inch)andnut(7/8inch)(Figure3).
Figure3
1.Extension
3.Bolt,7/8x4-1/2inch
2.Augershaft4.Nut,7/8inch
5.Starttheengine.
6.Maneuverthedriveshaftintotheendoftheauger
shaftorextension(ifapplicable)(Figure4).
Figure4
1.Drivehead
2.Augershaft
7.Stoptheengine.
8.Securetheaugertothedriveheadwithabolt(7/8x
4-1/2inch)andnut(7/8inch)(Figure5).
Figure5
1.Bolt,7/8x4-1/2inches2.Nut,7/8inch
9.Removetheboltandnutfromthecradlearmsthat
wereinstalledinstep3
10.Starttheengine.
11.Raisetheaugerfreeoftheground(Figure6).
Figure6
12.Whentheaugerisvertical,tilttheattachment
platerearward,untilthedriveheadcontactsthe
attachmentplatetostabilizetheaugerandkeepit
fromswingingfreely.
DiggingaHole
Theremaybeburiedpower,gas,and/or
telephonelinesintheworkarea.Shockor
explosionmayoccurifyoudigintothem.
Havethepropertyorworkareamarkedfor
buriedlinesanddonotdiginmarkedareas.
Contactyourlocalmarkingserviceorutility
companytohavethepropertymarked(for
example,intheUnitedStates,call811forthe
nationwidemarkingservice).
Important:Beforedigging,ensurethatthe
groundisfreeofanytrashordebris.
Important:Donotusetheaugerunlesstheauger
pointandteethareintactandingoodcondition.
5
1.Lowertheaugertothesoilatthesiteofthe
proposedhole.
2.MovethethrottlelevertotheFastposition.
3.Pulltheauxiliaryhydraulicslevertotheoperator
griporreferencebartobegindigging.
4.Lowertheaugerslowlyasthesoilisloosened.As
youdigdeeper,movethetractionunitbackward
orforwardasrequiredtokeeptheaugervertical
(Figure7).
Figure7
5.Whentheaugerbecomesfullofsoil,disengagethe
augerdriveandlifttheaugerfromthehole.Engage
theaugerdrivetospinoffthesoil,thenresume
digging.
Note:Switchingtheauxiliaryhydraulicslever
rapidlyfromforwardtoreversewillhelptoshake
offthesoil.
RemovinganAuger
1.Raisetheloaderarmssotheaugercomesoutof
thehole.
Note:Ifyouhavea24inchextensioninstalled
betweenthedriveheadandtheauger,itmaybe
necessarytoraisetheaugerashighaspossibleand
thenmovethetractionunitbackwardtopullthe
augertherestofthewayoutofthehole.
2.Settheaugerdowninitsstoragelocation.
3.Whileloweringthearms,driveslowlybackwards
untiltheaugerishorizontal.
4.Stoptheengine.
5.Removetheboltandnutsecuringthedriveheadto
theaugerorextension.
6.Starttheengineandbackthetractionunitaway
fromtheauger.
7.Ifyouusedanextension,removetheboltandnut
securingitandpullitoffoftheauger.
6
Maintenance
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Beforeeachuseordaily
•Greasethecradlearmpivotpoints.(Greaseallttingsimmediatelyafterevery
washing.)
•Checktheaugerteethandreplacethemiftheyaredamagedorworn.
Beforestorage
•Checktheaugerteethandreplacethemiftheyaredamagedorworn.
•Paintchippedsurfaces.
Ifyouleavethekeyintheignitionswitch,someonecouldstarttheengine.Accidentalstartingofthe
enginecouldseriouslyinjureyouorotherbystanders.
Removethekeyfromtheignitionswitchbeforeyoudoanymaintenance.
GreasingtheCradleArmPivot
Points
ServiceInterval:Beforeeachuseordaily(Grease
allttingsimmediatelyafterevery
washing.)
GreaseType:General-purposegrease
1.Stoptheengineandremovethekey.
2.Cleanthegreasettingswitharag.
3.Connectagreaseguntoeachtting.
4.Pumpgreaseintothettingsuntilgreasebeginsto
oozeoutofthebearings.
5.Wipeupanyexcessgrease.
Storage
1.Beforelongtermstorage,washtheattachmentwith
milddetergentandwatertoremovedirtandgrime.
2.Checkandtightenallbolts,nuts,andscrews.Repair
orreplaceanydamagedorwornpart.
3.Ensurethatallhydrauliccouplersareconnected
togethertopreventcontaminationofthehydraulic
system.
4.Paintallscratchedorbaremetalsurfaces.Paintis
availablefromyourAuthorizedServiceDealer.
5.Storetheattachmentinaclean,drygarageorstorage
area.Coverittoprotectitandkeepitclean.
7
Troubleshooting
Problem
PossibleCauseCorrectiveAction
1.Hydrauliccouplernotcompletely
connected
1.Checkandtightenallcouplers.
2.Defectivehydrauliccoupler2.Checkcouplersandreplaceanythat
aredefective.
3.Anobstructioninahydraulichose3.Findandremovetheobstruction.
4.Kinkedhydraulichose4.Replacethekinkedhose
Thedriveheaddoesnotoperate.
5.Thebearingshavefailed5.Refertoyourauthorizedservicedealer.
8
/