Vello LA-CEF-CFD allows you to mount Canon EF/EF-S lenses to a camera with a Micro Four Thirds (MFT) mount. It provides a secure and stable connection between the lens and the camera, enabling you to use your Canon lenses with your MFT camera.
The adapter maintains infinity focus, so you can focus your lens to infinity without any issues. It adds a 1.25x magnification to the lens, which can be useful for certain types of photography. Key Features:
- Compatible with Canon EF/EF-S lenses and Micro Four Thirds (MFT) cameras
- Secure and stable connection
- Maintains infinity focus
- Adds a 1.25x magnification to the lens
Vello LA-CEF-CFD allows you to mount Canon EF/EF-S lenses to a camera with a Micro Four Thirds (MFT) mount. It provides a secure and stable connection between the lens and the camera, enabling you to use your Canon lenses with your MFT camera.
The adapter maintains infinity focus, so you can focus your lens to infinity without any issues. It adds a 1.25x magnification to the lens, which can be useful for certain types of photography. Key Features:
- Compatible with Canon EF/EF-S lenses and Micro Four Thirds (MFT) cameras
- Secure and stable connection
- Maintains infinity focus
- Adds a 1.25x magnification to the lens
LENS
ADAPTER
MANUAL
LA-MFT-CFD
LA-CEF-CFD
2
Thank you for choosing a Vello Lens Adapter. Vello lens adapters allow you to use lenses from
manufacturers other than the maker of your camera body. Vello Lens Adapters fit securely to
the lens, but not so tightly that they are dicult to remove. Please follow these instructions to
mount and remove your Vello Lens Adapter.
Although the lens will t physically, automatic diaphragm (AE metering), and other functions dependent
on communication between the camera body and lens, will be disrupted by a lens adapter. You will need
to set exposures manually or meter in aperture priority (stop-down) mode. The lens adapter adds a 1.25
magnication to the lens. Focusing to innity is retained.
INTRODUCTION
All images are for illustrative purposes only.
3
1. Line up the alignment dots on the lens
adapter and the camera. Rotate the lens
adapter clockwise until it locks into place.
TO MOUNT THE LENS ADAPTER
Some Canon FD lenses have a breech-lock mount instead of a bayonet mount with a release
button. If your Canon FD lens has a breech-lock mount, follow these instructions. If your Canon
FD lens has a bayonet mount, follow the next set of instructions.
BREECH-LOCK MOUNT
4
3. Line up the alignment dots on the lens and
the lens adapter.
2. Make sure the locking collar on the lens is
rotated completely counterclockwise
(A)
.
Note: On some lenses, this is not necessary.
Rotate the collar on the lens adapter in the
direction of the arrow to the OPEN position
(B).
5
4. Rotate the locking collar on the lens
clockwise until it is secure.
5. Rotate the collar on the lens adapter in
the direction of the arrow to the LOCK
position.
6
1. Rotate the locking collar on the lens
counterclockwise to release the lens.
2. Press and hold the lens release button
on the camera. Rotate the lens adapter
counterclockwise to release.
TO REMOVE THE LENS ADAPTER
7
2. Rotate the collar on the lens adapter in
the direction of the arrow to the OPEN
position.
1. Line up the alignment dots on the lens
adapter and the camera. Rotate the lens
adapter clockwise until it locks into place.
TO MOUNT THE LENS ADAPTER
BAYONET MOUNT
8
3. Line up the alignment dots on the lens and
the lens adapter. Rotate the lens clockwise
until it locks into place.
4. Rotate the collar on the lens adapter in
the direction of the arrow to the LOCK
position.
9
1. Press and hold the release button on the
lens.
2. Rotate the lens counterclockwise to
release.
TO REMOVE THE LENS ADAPTER
10
3. Press and hold the lens release button
on the camera. Rotate the lens adapter
counterclockwise to release.
For Micro Four-Thirds (MFT) cameras, enable
the “Shoot without Lens” function in the menu
of the camera.
Tip: When shooting at a low f/stop, rotate the
collar on the lens adapter to OPEN position to
let in more light for easier focusing. Once you
have focused the image, rotate the collar on the
lens adapter to the LOCK position before taking
the picture.
This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship
under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty
shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during nor-
mal use of this product in its intended manner and in its intended environment. Inoperability of the product or
part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider
reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specic legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof
of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group.
© 2014 Gradus Group LLC. All Rights Reserved.
ONE-YEAR LIMITED WARRANTY
© Copyright 2014 Gradus Group
www.vellogear.com
Vello and other names of Vello products are trademarks of Gradus Group. Other product and corporate names mentioned
herein are trademarks of their respective holders.
GG2
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Vello LA-CEF-CFD User manual
- Type
- User manual
- This manual is also suitable for
Vello LA-CEF-CFD allows you to mount Canon EF/EF-S lenses to a camera with a Micro Four Thirds (MFT) mount. It provides a secure and stable connection between the lens and the camera, enabling you to use your Canon lenses with your MFT camera.
The adapter maintains infinity focus, so you can focus your lens to infinity without any issues. It adds a 1.25x magnification to the lens, which can be useful for certain types of photography. Key Features:
- Compatible with Canon EF/EF-S lenses and Micro Four Thirds (MFT) cameras
- Secure and stable connection
- Maintains infinity focus
- Adds a 1.25x magnification to the lens
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Vello LA-CEF-NAF User manual
-
-
-
-
-
Vello LAE-MFT-FT User manual
-
-
-
-
Other documents
-
Xcellon MCO-EV6 Quick setup guide
-
raya FF-SULH User manual
-
Impact MBM-1000 Magnetic Background Mount Operating instructions
-
Magnus DuraPod BX TM-11B Owner's manual
-
GABOR LTS-20 User manual
-
-
Polsen HPC-A20 Closed Back Studio Monitor Headphones User manual
-
Revo AC-MUSIC User manual
-
Senal SHX-800 User guide
-
auray SS-ADP-14 User manual
