Generation Lighting 44106-72 Installation guide

Brand
Generation Lighting
Model
44106-72
Type
Installation guide

This manual is also suitable for

Generation Lighting 44106-72 is a lighting fixture that provides stylish and functional illumination for your indoor spaces. With its versatile design, it can be used in a variety of settings, including hallways, bedrooms, and living rooms.

The fixture is crafted from high-quality materials and features a durable construction that ensures longevity. It comes with all the necessary hardware for easy installation, allowing you to set it up quickly and effortlessly.

The 44106-72 model offers adjustable lighting options, enabling you to customize the brightness and ambiance to suit your needs. Whether you prefer a bright and invigorating atmosphere or a warm and inviting glow, this fixture can accommodate your preferences.

Generation Lighting 44106-72 is a lighting fixture that provides stylish and functional illumination for your indoor spaces. With its versatile design, it can be used in a variety of settings, including hallways, bedrooms, and living rooms.

The fixture is crafted from high-quality materials and features a durable construction that ensures longevity. It comes with all the necessary hardware for easy installation, allowing you to set it up quickly and effortlessly.

The 44106-72 model offers adjustable lighting options, enabling you to customize the brightness and ambiance to suit your needs. Whether you prefer a bright and invigorating atmosphere or a warm and inviting glow, this fixture can accommodate your preferences.

FOR YOUR SAFETY
BEFORE YOU BEGIN
GENERAL
WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE
W
ORKING ON IS SHUT OFF. EITHER THE FUSE REMOVED OR
THE CIRCUIT BREAKER OFF .
WARNING: USE OF OTHER MANUFACTURER’S COMPONENTS
WIlL VOID WARRANTY, LISTING,AND MAY CAUSE A POTENTIAL
SAFETY HAZARD
You don’t need special tools to install this fixture. Be sure to follow the
steps in the order given. Read instructions carefully. If you are
unc
lear as to how to proceed, consult a qualified electrician.
NO
TE: Proper wiring is essential for the safe operation of this
f
ixture.
Carefully remove the fixture from the carton and check that all parts
are included, as shown in Figures 1 & 2. Be careful not to misplace
any of the screws or parts which are needed to install this fixture.
STEP 1:
FIGURE 1 *NOT SUPPLIED
RET
AINING
RING (C)
C
AP NUTS (D)
BACKPLATE (G)
GLASS (B)
CLEANING
ORDERING PARTS
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap.
Do not use abrasive materials such as scouring pads or powders,
steel wool or abrasive paper.
Keep this sheet for future reference, and in case you need to order
replacement parts. Parts for this fixture can be ordered from place of
purchase. Be sure to use exact wording from illustration when
ordering parts.
Installation And Safety Instructions
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to
this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________
HC-894
0
51409
*OUTLET BOX *#8-32
OUTLET
BOX
SCREWS
MOUNTING
SCREWS (F)
GREEN
GROUNDING
SCREW (E)
*SUPPLY
GROUND
WIRE
UNIVERSAL
MOUNTING
PLATE (A)
*ORANGE
WIRE
CONNECTORS
GROUNDING INSTRUCTIONS: The green grounding screw (E) is
to be inserted into the hole with two raised dimples provided on the
universal mounting plate (A).Wrap the ground wire from the outlet box
(bare metal or green insulated wire) around the green grounding
screw (E) on the universal mounting plate (A) and tighten the green
grounding screw to secure.
NEVER CONNECT GROUND WIRE TO BLACK OR WHITE
POWER SUPPLY WIRES.
I
NSTALLATION HC-894
F
INAL ASSEMBLY
STEP 1:
STEP 4:
S
TEP 1:
STEP 2:
STEP 2:
STEP 3:
Insert fixture mounting screws (F) in threaded holes of universal
mounting plate (A). Run screws all the way down to the heads.
After wires are connected, tuck them carefully inside the outlet box.
P
osition backplate (G) over mounting screws (F) and secure in place
with cap nuts (D).
M
ake sure no bare wires can be seen outside wire connectors.
A. Use an orange listed wire connector to connect the 18AWG
fixture hot wire (black wire, or round and smooth tracer) to the
supply hot wire.
B. Use an orange listed wire connector to connect the 18AWG
fixture common wire (white wire, or square and rigid) to the supply
common wire.
C. Gently try to remove the wires from the connector. If you can
remove the wires, carefully re-do the wiring connection.
Place universal mounting plate (A) against outlet box (not supplied)
and secure in place using outlet box screws (not supplied). Be sure
t
he mounting screws (F) are perfectly horizontal so fixture hangs
straight.
I
MPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET
BOX.
Raise glass (B) and secure in place with retaining ring (C).
STEP 3:
Install lamps.
  • Page 1 1
  • Page 2 2

Generation Lighting 44106-72 Installation guide

Brand
Generation Lighting
Model
44106-72
Type
Installation guide
This manual is also suitable for

Generation Lighting 44106-72 is a lighting fixture that provides stylish and functional illumination for your indoor spaces. With its versatile design, it can be used in a variety of settings, including hallways, bedrooms, and living rooms.

The fixture is crafted from high-quality materials and features a durable construction that ensures longevity. It comes with all the necessary hardware for easy installation, allowing you to set it up quickly and effortlessly.

The 44106-72 model offers adjustable lighting options, enabling you to customize the brightness and ambiance to suit your needs. Whether you prefer a bright and invigorating atmosphere or a warm and inviting glow, this fixture can accommodate your preferences.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents