Item# _______________________________________________
Job _________________________________________________
Linen Cart Model T68A
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
31.15
METRO MOBILE
SOILED LINEN CART
• Quick Access: Upper side door drops
down for loading; bottom door swings up for
unloading.
• Material: 14-gauge, high-strength,
aluminum.
• Rugged: Aircraft-riveted construction
throughout.
• Heavy-Duty Capacity: 33 cubic feet
(.9 cu.m.) of space.
• Easy to Clean and Sanitize: Sealed
interior seams and smooth obstruction-free
interior simplify cleaning. And its silver
anodized aluminum (bacterio-static) finish
won't stain or discolor linen.
• Non-Corroding
• Lightweight:
Only 108 lbs. (49kg).
• Swivel Tilt Caster Arrangement: Tracks
straight, turns in its own length. (Corner-
mounted casters available on request.)
• Recessed Push Handle
• Continuous Center-Hinged Doors
on top
swing 180 degrees to lie flat.
• Continuous Gray Vinyl Bumper
• Silver Anodized Aluminum Finish
Copyright © 1998 InterMetro Industries Corp.
T68A
Job____________________________________________
METRO MOBILE
SOILED LINEN CART
Manufactured by: Phone 717-825-2741
InterMetro Industries Corp. FAX 717-825-2852
North Washington Street For Product Information, call 1-800-433-2232
Wilkes-Barre, PA 18705 For Customer Service, call 1-800-992-1776
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
L02-160
3/98 BJ
Printed in U.S.A.
Information and specifications are subject to change
without notice. Please confirm at time of order.
Linen Cart Model T68A
31.15
DIMENSIONS
Approx.
Height Width Length Pkd. Wt.
Cat. No. Finish (in.) (mm) (in.) (mm) (in.) (mm) (lbs.) (kg)
T68A Anodized Overall 46
3
/
4
1185 32
1
/
4
820 56 1420 108 49
Inside 38
1
/
4
970 30 760 50 1270
ACCESSORIES
Model
C8AIR Extra Heavy-Duty Pneumatic-Tired Casters†
C8D 8" (203mm) Heavy-Duty Rubber-Tired Casters
†NOTE: Wheel Brake not available on Pneumatic Casters.
Two swivel and two rigid casters.
SPECIFICATIONS
• Material: 14-gauge and 10-gauge high-strength silver anodized
aluminum.
• Construction: Aircraft-riveted construction throughout.
• Bottom: 10-gauge, brake-formed box shape, turned down and
sealed.
• Ends: 14-gauge, brake-formed, channel-shaped ends, riveted to
chassis.
• Doors: Single sheet 10-gauge with continuous hinge. Two-point
horizontal rod latch. Two doors, one side only, hinged at center,
top door swings down from top, bottom door swings up from
bottom. Door keeper holds bottom door in raised position. Top
doors, center-hinged, swing 180 degrees.
• Casters: 5" (127mm) two BB5N swivel, two BB5NR rigid double
ball-bearing swivel, ball-bearing axle, zinc-plated, pre-lubricated,
neoprene-tired, bolted through
1
/
8
" (3mm) flanged support plates
in a diamond pattern.
• Handles: Recessed tubular push handle at each end.
• Bumper: Continuous gray vinyl (A33) non-marking, fastened to
chassis.
NOTE: Corner mounting of casters available on request. Specify on order.
-
1
-
2
Intermetro C8D Datasheet
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Metro L01-319 Operating instructions
-
-
-
-
Metro DataVac L01-507 Operating instructions
-
-
-
Metro DataVac Corrugated PCB Truck Assembly Instructions
-
-