Intermetro A32 Datasheet

Type
Datasheet

This manual is also suitable for

Item# _______________________________________________
Job _________________________________________________
Cabinets CD Series
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Copyright © 1993 InterMetro Industries Corporation
13.01
Metro Mobile
DELIVERY/STORAGE
CABINETS
• Material: 14-gauge, high-strength, natural finish
aluminum.
Rugged: Aircraft-riveted construction
throughout. Cast aluminum corners withstand
hard use.
Economy Model
Versatile: Use for delivery or storage. 8 models
to fit your every need.
Space-Saver: Continuous hinged door recedes
into side wall so cabinets can be positioned
against one another.
Lightweight: Easy to handle. In price . . . and
mobility.
Recessed Gravity Latch: Open and close door
with a touch of a finger.
Lockable Door
Ideal for schools, commercial cafeterias.
Copyright © 1999 Metropolitan Wire Corp.
CD3N
Job____________________________________________
Metro Mobile
DELIVERY/STORAGE CABINETS
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
L02-063
5/99 BJ
Printed in U.S.A.
Information and specifications are subject to change
without notice. Please confirm at time of order.
Cabinets CD Series
13.01
Specifications
Material: 14-gauge, high-
strength, natural finish aluminum.
Construction: Aircraft-riveted
construction throughout.
Top: Brake-formed into box
section, reinforced by
1
/
8
” (3mm)
thick armored aluminum corners.
Bottom: Brake-formed into box
section, providing smooth
obstruction-free floor.
Sides: Brake-formed from flat
stock to form vertical corner post
— stabilizer rod bolted through
sides at front center.
Slides: Bulb-tipped extruded
channel riveted to sides.
Back: Brake-formed from flat
stock to form vertical corner post.
Casters: Two B5DN on back —
5” (127mm) double ball bearing
swivel, ball bearing axle, nickel-
plated, donut neoprene-tired, pre-
lubricated, bolted to the bottom of
the chassis through 10-gauge
support channels. Two B5DNB on
front — same as above, with
wheel brake.
Door: Lockable door reinforced
with angle-formed edge. Full-
length continuous hinge, swings
270 degrees, and recedes into
side wall with door stay.
Recessed-type gravity latch.
Spring-clip card holder on front
door.
DIMENSIONS:
(a) (b) (c) (d) Slide Approx.
Height Width Depth Inside Height Spacing Pan Capacity Pkd. Wt.
Model No. (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) no. size (in.) (lbs.) (kg)
CD3N 63
1
/
4
1605 21
1
/
2
545 28 710 52
5
/
8
1335 1
1
/
2
38 35 18 x 26 85 38
CD4N 71
1
/
2
1815 21
1
/
2
545 28 710 60
5
/
8
1540 1
1
/
2
38 40 18 x 26 95 43
ACCESSORIES:
Model
____________________________________________
A32 Gray Corner Bumpers
____________________________________________
A33 Gray Continuous Bumper
____________________________________________
A71 Floor Lock
____________________________________________
Manufactured by:
InterMetro Industries Corp. Phone 570-825-2741
North Washington Street FAX 570-825-2852
Wilkes-Barre, PA 18705 For Product Information, call 1-800-433-2232
www.metro.com For Customer Service, call 1-800-992-1776
  • Page 1 1
  • Page 2 2

Intermetro A32 Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI